hostapd_set_bss_options() {
local var="$1"
local vif="$2"
- local enc wpa_group_rekey wps_possible
+ local enc wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wps_possible
config_get enc "$vif" encryption
- config_get wpa_group_rekey "$vif" wpa_group_rekey
+ config_get wep_rekey "$vif" wep_rekey # 300
+ config_get wpa_group_rekey "$vif" wpa_group_rekey # 300
+ config_get wpa_pair_rekey "$vif" wpa_pair_rekey # 300
+ config_get wpa_master_rekey "$vif" wpa_master_rekey # 640
config_get_bool ap_isolate "$vif" isolate 0
+ config_get_bool disassoc_low_ack "$vif" disassoc_low_ack 1
+ config_get max_num_sta "$vif" max_num_sta 0
+ config_get max_inactivity "$vif" max_inactivity 0
config_get device "$vif" device
config_get hwmode "$device" hwmode
+ config_get phy "$device" phy
+
+ append "$var" "ctrl_interface=/var/run/hostapd-$phy" "$N"
if [ "$ap_isolate" -gt 0 ]; then
append "$var" "ap_isolate=$ap_isolate" "$N"
fi
+ if [ "$max_num_sta" -gt 0 ]; then
+ append "$var" "max_num_sta=$max_num_sta" "$N"
+ fi
+ if [ "$max_inactivity" -gt 0 ]; then
+ append "$var" "ap_max_inactivity=$max_inactivity" "$N"
+ fi
+ append "$var" "disassoc_low_ack=$disassoc_low_ack" "$N"
# Examples:
# psk-mixed/tkip => WPA1+2 PSK, TKIP
esac
# enforce CCMP for 11ng and 11na
- case "$hwmode" in
- *ng|*na) crypto="CCMP";;
+ case "$hwmode:$crypto" in
+ *ng:TKIP|*na:TKIP) crypto="CCMP TKIP";;
esac
# use crypto/auth settings for building the hostapd config
append "$var" "wpa_passphrase=$psk" "$N"
fi
wps_possible=1
+ [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
+ [ -n "$wpa_pair_rekey" ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey" "$N"
+ [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey" "$N"
;;
*wpa*)
# required fields? formats?
# hostapd is particular, maybe a default configuration for failures
- config_get server "$vif" server
- append "$var" "auth_server_addr=$server" "$N"
- config_get port "$vif" port
- port=${port:-1812}
- append "$var" "auth_server_port=$port" "$N"
- config_get secret "$vif" key
- append "$var" "auth_server_shared_secret=$secret" "$N"
+ config_get auth_server "$vif" auth_server
+ [ -z "$auth_server" ] && config_get auth_server "$vif" server
+ append "$var" "auth_server_addr=$auth_server" "$N"
+ config_get auth_port "$vif" auth_port
+ [ -z "$auth_port" ] && config_get auth_port "$vif" port
+ auth_port=${auth_port:-1812}
+ append "$var" "auth_server_port=$auth_port" "$N"
+ config_get auth_secret "$vif" auth_secret
+ [ -z "$auth_secret" ] && config_get auth_secret "$vif" key
+ append "$var" "auth_server_shared_secret=$auth_secret" "$N"
+ config_get_bool auth_cache "$vif" auth_cache 0
+ [ "$auth_cache" -gt 0 ] || append "$var" "disable_pmksa_caching=1" "$N"
+ [ "$auth_cache" -gt 0 ] || append "$var" "okc=0" "$N"
+ config_get acct_server "$vif" acct_server
+ [ -n "$acct_server" ] && append "$var" "acct_server_addr=$acct_server" "$N"
+ config_get acct_port "$vif" acct_port
+ [ -n "$acct_port" ] && acct_port=${acct_port:-1813}
+ [ -n "$acct_port" ] && append "$var" "acct_server_port=$acct_port" "$N"
+ config_get acct_secret "$vif" acct_secret
+ [ -n "$acct_secret" ] && append "$var" "acct_server_shared_secret=$acct_secret" "$N"
config_get nasid "$vif" nasid
append "$var" "nas_identifier=$nasid" "$N"
append "$var" "eapol_key_index_workaround=1" "$N"
- append "$var" "radius_acct_interim_interval=300" "$N"
append "$var" "ieee8021x=1" "$N"
append "$var" "wpa_key_mgmt=WPA-EAP" "$N"
- append "$var" "wpa_group_rekey=300" "$N"
- append "$var" "wpa_gmk_rekey=640" "$N"
+ [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
+ [ -n "$wpa_pair_rekey" ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey" "$N"
+ [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey" "$N"
;;
*wep*)
config_get key "$vif" key
*)
append "$var" "wep_key0=$(prepare_key_wep "$key")" "$N"
append "$var" "wep_default_key=0" "$N"
+ [ -n "$wep_rekey" ] && append "$var" "wep_rekey_period=$wep_rekey" "$N"
;;
esac
case "$enc" in
config_get iapp_interface "$vif" iapp_interface
config_get_bool wps_pbc "$vif" wps_pushbutton 0
- [ -n "$wps_possible" -a "$wps_pbc" -gt 0 ] && {
+ config_get_bool wps_label "$vif" wps_label 0
+
+ config_get config_methods "$vif" wps_config
+ [ "$wps_pbc" -gt 0 ] && append config_methods push_button
+
+ [ -n "$wps_possible" -a -n "$config_methods" ] && {
+ config_get device_type "$vif" wps_device_type "6-0050F204-1"
+ config_get device_name "$vif" wps_device_name "OpenWrt AP"
+ config_get manufacturer "$vif" wps_manufacturer "openwrt.org"
+
append "$var" "eap_server=1" "$N"
append "$var" "wps_state=2" "$N"
append "$var" "ap_setup_locked=1" "$N"
- append "$var" "config_methods=push_button" "$N"
+ append "$var" "device_type=$device_type" "$N"
+ append "$var" "device_name=$device_name" "$N"
+ append "$var" "manufacturer=$manufacturer" "$N"
+ append "$var" "config_methods=$config_methods" "$N"
}
append "$var" "ssid=$ssid" "$N"
if [ "$wpa" -ge "2" ]
then
# RSN -> allow preauthentication
- config_get rsn_preauth "$vif" rsn_preauth
+ config_get_bool rsn_preauth "$vif" rsn_preauth "$auth_cache"
if [ -n "$bridge" -a "$rsn_preauth" = 1 ]
then
append "$var" "rsn_preauth=1" "$N"
fi
}
+hostapd_set_log_options() {
+ local var="$1"
+ local cfg="$2"
+ local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
+
+ config_get log_level "$cfg" log_level 2
+
+ config_get_bool log_80211 "$cfg" log_80211 1
+ config_get_bool log_8021x "$cfg" log_8021x 1
+ config_get_bool log_radius "$cfg" log_radius 1
+ config_get_bool log_wpa "$cfg" log_wpa 1
+ config_get_bool log_driver "$cfg" log_driver 1
+ config_get_bool log_iapp "$cfg" log_iapp 1
+ config_get_bool log_mlme "$cfg" log_mlme 1
+
+ local log_mask=$(( \
+ ($log_80211 << 0) | \
+ ($log_8021x << 1) | \
+ ($log_radius << 2) | \
+ ($log_wpa << 3) | \
+ ($log_driver << 4) | \
+ ($log_iapp << 5) | \
+ ($log_mlme << 6) \
+ ))
+
+ append "$var" "logger_syslog=$log_mask" "$N"
+ append "$var" "logger_syslog_level=$log_level" "$N"
+ append "$var" "logger_stdout=$log_mask" "$N"
+ append "$var" "logger_stdout_level=$log_level" "$N"
+}
+
hostapd_setup_vif() {
local vif="$1"
local driver="$2"
+ local ifname device channel hwmode
+
hostapd_cfg=
- hostapd_set_bss_options hostapd_cfg "$vif"
config_get ifname "$vif" ifname
config_get device "$vif" device
config_get channel "$device" channel
config_get hwmode "$device" hwmode
+
+ hostapd_set_log_options hostapd_cfg "$device"
+ hostapd_set_bss_options hostapd_cfg "$vif"
+
case "$hwmode" in
*bg|*gdt|*gst|*fh) hwmode=g;;
*adt|*ast) hwmode=a;;
[ "$channel" = auto ] && channel=
[ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
cat > /var/run/hostapd-$ifname.conf <<EOF
-ctrl_interface=/var/run/hostapd-$ifname
driver=$driver
interface=$ifname
${hwmode:+hw_mode=${hwmode#11}}
projects / openwrt / svn-archive / archive.git / blobdiff