define KernelPackage/ata-core
SUBMENU:=$(BLOCK_MENU)
TITLE:=Serial and Parallel ATA support
- DEPENDS:=@PCI_SUPPORT +kmod-scsi-core
+ DEPENDS:=@PCI_SUPPORT||TARGET_sunxi +kmod-scsi-core
KCONFIG:=CONFIG_ATA
FILES:=$(LINUX_DIR)/drivers/ata/libata.ko
+ifneq ($(wildcard $(LINUX_DIR)/drivers/ata/libahci.ko),)
+ FILES+=$(LINUX_DIR)/drivers/ata/libahci.ko
+endif
endef
$(eval $(call KernelPackage,ata-core))
define AddDepends/ata
SUBMENU:=$(BLOCK_MENU)
- DEPENDS+=kmod-ata-core $(1)
+ DEPENDS+=+kmod-ata-core $(1)
endef
TITLE:=AHCI Serial ATA support
KCONFIG:=CONFIG_SATA_AHCI
FILES:= \
- $(LINUX_DIR)/drivers/ata/ahci.ko \
- $(LINUX_DIR)/drivers/ata/libahci.ko
+ $(LINUX_DIR)/drivers/ata/ahci.ko
AUTOLOAD:=$(call AutoLoad,41,libahci ahci,1)
$(call AddDepends/ata)
endef
$(eval $(call KernelPackage,ata-ahci))
+define KernelPackage/ata-ahci-platform
+ TITLE:=AHCI Serial ATA Platform support
+ KCONFIG:=CONFIG_SATA_AHCI_PLATFORM
+ FILES:= \
+ $(LINUX_DIR)/drivers/ata/ahci_platform.ko \
+ $(LINUX_DIR)/drivers/ata/libahci_platform.ko
+ AUTOLOAD:=$(call AutoLoad,40,libahci libahci_platform ahci_platform,1)
+ $(call AddDepends/ata,@TARGET_ipq806x||TARGET_sunxi)
+endef
+
+define KernelPackage/ata-ahci-platform/description
+ Platform support for AHCI Serial ATA controllers
+endef
+
+$(eval $(call KernelPackage,ata-ahci-platform))
+
+
define KernelPackage/ata-artop
TITLE:=ARTOP 6210/6260 PATA support
KCONFIG:=CONFIG_PATA_ARTOP
$(eval $(call KernelPackage,ata-artop))
-define KernelPackage/ata-imx
- TITLE:=Freescale i.MX AHCI SATA support
- DEPENDS:=@TARGET_imx6
- KCONFIG:=\
- CONFIG_AHCI_IMX \
- CONFIG_SATA_AHCI_PLATFORM \
- CONFIG_PATA_IMX=n
- FILES:=$(LINUX_DIR)/drivers/ata/ahci_imx.ko
- AUTOLOAD:=$(call AutoLoad,41,ahci_imx,1)
- $(call AddDepends/ata)
-endef
-
-define KernelPackage/ata-imx/description
- SATA support for the Freescale i.MX6 SoC's onboard AHCI SATA
-endef
-
-$(eval $(call KernelPackage,ata-imx))
-
-
define KernelPackage/ata-marvell-sata
TITLE:=Marvell Serial ATA support
KCONFIG:=CONFIG_SATA_MV
$(eval $(call KernelPackage,ata-nvidia-sata))
-define KernelPackage/ata-oxnas-sata
- TITLE:=oxnas Serial ATA support
- KCONFIG:=CONFIG_SATA_OXNAS
- DEPENDS:=@TARGET_oxnas
- FILES:=$(LINUX_DIR)/drivers/ata/sata_oxnas.ko
- AUTOLOAD:=$(call AutoLoad,41,sata_oxnas,1)
- $(call AddDepends/ata)
-endef
-
-define KernelPackage/ata-oxnas-sata/description
- SATA support for OX934 core found in the OX82x/PLX782x SoCs
-endef
-
-$(eval $(call KernelPackage,ata-oxnas-sata))
-
-
define KernelPackage/ata-pdc202xx-old
- SUBMENU:=$(BLOCK_MENU)
TITLE:=Older Promise PATA controller support
- DEPENDS:=kmod-ata-core
KCONFIG:= \
CONFIG_ATA_SFF=y \
CONFIG_PATA_PDC_OLD
FILES:=$(LINUX_DIR)/drivers/ata/pata_pdc202xx_old.ko
AUTOLOAD:=$(call AutoLoad,41,pata_pdc202xx_old,1)
+ $(call AddDepends/ata)
endef
define KernelPackage/ata-pdc202xx-old/description
$(eval $(call KernelPackage,block2mtd))
+define KernelPackage/dax
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=DAX: direct access to differentiated memory
+ KCONFIG:=CONFIG_DAX
+ FILES:=$(LINUX_DIR)/drivers/dax/dax.ko
+endef
+
+$(eval $(call KernelPackage,dax))
+
+
define KernelPackage/dm
SUBMENU:=$(BLOCK_MENU)
TITLE:=Device Mapper
- DEPENDS:=+kmod-crypto-manager
+ DEPENDS:=+kmod-crypto-manager +kmod-dax
# All the "=n" are unnecessary, they're only there
# to stop the config from asking the question.
# MIRROR is M because I've needed it for pvmove.
CONFIG_DM_DEBUG=n \
CONFIG_DM_UEVENT=n \
CONFIG_DM_DELAY=n \
+ CONFIG_DM_LOG_WRITES=n \
+ CONFIG_DM_MQ_DEFAULT=n \
CONFIG_DM_MULTIPATH=n \
CONFIG_DM_ZERO=n \
CONFIG_DM_SNAPSHOT=n \
CONFIG_BLK_DEV_DM \
CONFIG_DM_CRYPT \
CONFIG_DM_MIRROR
- FILES:=$(LINUX_DIR)/drivers/md/dm-*.ko
+ FILES:= \
+ $(LINUX_DIR)/drivers/md/dm-mod.ko \
+ $(LINUX_DIR)/drivers/md/dm-crypt.ko \
+ $(LINUX_DIR)/drivers/md/dm-log.ko \
+ $(LINUX_DIR)/drivers/md/dm-mirror.ko \
+ $(LINUX_DIR)/drivers/md/dm-region-hash.ko
AUTOLOAD:=$(call AutoLoad,30,dm-mod dm-log dm-region-hash dm-mirror dm-crypt)
endef
$(eval $(call KernelPackage,dm))
+define KernelPackage/dm-raid
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=LVM2 raid support
+ DEPENDS:=+kmod-dm +kmod-md-mod \
+ +kmod-md-raid0 +kmod-md-raid1 +kmod-md-raid10 +kmod-md-raid456
+ KCONFIG:= \
+ CONFIG_DM_RAID
+ FILES:=$(LINUX_DIR)/drivers/md/dm-raid.ko
+ AUTOLOAD:=$(call AutoLoad,31,dm-raid)
+endef
+
+define KernelPackage/dm-raid/description
+ Kernel module necessary for LVM2 raid support
+endef
+
+$(eval $(call KernelPackage,dm-raid))
+
+
+define KernelPackage/iscsi-initiator
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=iSCSI Initiator over TCP/IP
+ DEPENDS:=+kmod-scsi-core +kmod-crypto-hash
+ KCONFIG:= \
+ CONFIG_INET \
+ CONFIG_SCSI_LOWLEVEL=y \
+ CONFIG_ISCSI_TCP \
+ CONFIG_SCSI_ISCSI_ATTRS=y
+ FILES:= \
+ $(LINUX_DIR)/drivers/scsi/iscsi_tcp.ko \
+ $(LINUX_DIR)/drivers/scsi/libiscsi.ko \
+ $(LINUX_DIR)/drivers/scsi/libiscsi_tcp.ko \
+ $(LINUX_DIR)/drivers/scsi/scsi_transport_iscsi.ko
+ AUTOLOAD:=$(call AutoProbe,libiscsi libiscsi_tcp scsi_transport_iscsi iscsi_tcp)
+endef
+
+define KernelPackage/iscsi-initiator/description
+The iSCSI Driver provides a host with the ability to access storage through an
+IP network. The driver uses the iSCSI protocol to transport SCSI requests and
+responses over a TCP/IP network between the host (the "initiator") and "targets".
+endef
+
+$(eval $(call KernelPackage,iscsi-initiator))
+
define KernelPackage/md-mod
SUBMENU:=$(BLOCK_MENU)
define KernelPackage/md-raid456
-$(call KernelPackage/md/Depends,+kmod-lib-raid6 +kmod-lib-xor)
+$(call KernelPackage/md/Depends,+kmod-lib-raid6 +kmod-lib-xor +kmod-lib-crc32c)
TITLE:=RAID Level 456 Driver
KCONFIG:= \
CONFIG_ASYNC_CORE \
$(eval $(call KernelPackage,md-multipath))
-define KernelPackage/ide-core
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=IDE (ATA/ATAPI) device support
- DEPENDS:=@PCI_SUPPORT
- KCONFIG:= \
- CONFIG_IDE \
- CONFIG_BLK_DEV_IDE \
- CONFIG_BLK_DEV_IDEDISK \
- CONFIG_IDE_GD \
- CONFIG_IDE_GD_ATA=y \
- CONFIG_IDE_GD_ATAPI=n \
- CONFIG_IDEPCI_PCIBUS_ORDER=y \
- CONFIG_BLK_DEV_IDEDMA_PCI=y \
- CONFIG_BLK_DEV_IDEPCI=y
- FILES:= \
- $(LINUX_DIR)/drivers/ide/ide-core.ko \
- $(LINUX_DIR)/drivers/ide/ide-gd_mod.ko
-endef
-
-define KernelPackage/ide-core/description
- Kernel support for IDE, useful for usb mass storage devices (e.g. on WL-HDD)
- Includes:
- - ide-core
- - ide-gd_mod
-endef
-
-$(eval $(call KernelPackage,ide-core))
-
-
-define AddDepends/ide
- SUBMENU:=$(BLOCK_MENU)
- DEPENDS+=kmod-ide-core $(1)
-endef
-
-
-define KernelPackage/ide-generic
- SUBMENU:=$(BLOCK_MENU)
- DEPENDS:=@PCI_SUPPORT
- TITLE:=Kernel support for generic PCI IDE chipsets
- KCONFIG:=CONFIG_BLK_DEV_GENERIC
- FILES:=$(LINUX_DIR)/drivers/ide/ide-pci-generic.ko
- AUTOLOAD:=$(call AutoLoad,30,ide-pci-generic,1)
- $(call AddDepends/ide)
-endef
-
-$(eval $(call KernelPackage,ide-generic))
-
-
-define KernelPackage/ide-generic-old
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=Kernel support for generic (legacy) IDE chipsets
- KCONFIG:=CONFIG_IDE_GENERIC
- FILES:=$(LINUX_DIR)/drivers/ide/ide-generic.ko
- AUTOLOAD:=$(call AutoLoad,30,ide-generic,1)
- $(call AddDepends/ide)
-endef
-
-$(eval $(call KernelPackage,ide-generic-old))
-
-
-define KernelPackage/ide-aec62xx
- TITLE:=Acard AEC62xx IDE driver
- DEPENDS:=@PCI_SUPPORT
- KCONFIG:=CONFIG_BLK_DEV_AEC62XX
- FILES:=$(LINUX_DIR)/drivers/ide/aec62xx.ko
- AUTOLOAD:=$(call AutoLoad,30,aec62xx,1)
- $(call AddDepends/ide)
-endef
-
-define KernelPackage/ide-aec62xx/description
- Support for Acard AEC62xx (Artop ATP8xx) IDE controllers
-endef
-
-$(eval $(call KernelPackage,ide-aec62xx,1))
-
-
-define KernelPackage/ide-pdc202xx
- TITLE:=Promise PDC202xx IDE driver
- DEPENDS:=@PCI_SUPPORT
- KCONFIG:=CONFIG_BLK_DEV_PDC202XX_OLD
- FILES:=$(LINUX_DIR)/drivers/ide/pdc202xx_old.ko
- AUTOLOAD:=$(call AutoLoad,30,pdc202xx_old,1)
- $(call AddDepends/ide)
-endef
-
-define KernelPackage/ide-pdc202xx/description
- Support for the Promise Ultra 33/66/100 (PDC202{46|62|65|67|68}) IDE
- controllers.
-endef
-
-$(eval $(call KernelPackage,ide-pdc202xx))
-
-
-define KernelPackage/ide-it821x
- TITLE:=ITE IT821x IDE driver
- DEPENDS:=@PCI_SUPPORT
- KCONFIG:=CONFIG_BLK_DEV_IT821X
- FILES=$(LINUX_DIR)/drivers/ide/it821x.ko
- AUTOLOAD:=$(call AutoLoad,30,it821x,1)
- $(call AddDepends/ide)
-endef
-
-define KernelPackage/ide-it821x/description
- Kernel module for the ITE IDE821x IDE controllers
-endef
-
-$(eval $(call KernelPackage,ide-it821x))
-
-
define KernelPackage/libsas
SUBMENU:=$(BLOCK_MENU)
DEPENDS:=@TARGET_x86
CONFIG_SCSI \
CONFIG_BLK_DEV_SD
FILES:= \
- $(if $(findstring y,$(CONFIG_SCSI)),,$(LINUX_DIR)/drivers/scsi/scsi_mod.ko) \
+ $(LINUX_DIR)/drivers/scsi/scsi_mod.ko \
$(LINUX_DIR)/drivers/scsi/sd_mod.ko
- AUTOLOAD:=$(call AutoLoad,40,sd_mod,1)
+ AUTOLOAD:=$(call AutoLoad,40,scsi_mod sd_mod,1)
endef
$(eval $(call KernelPackage,scsi-core))
endef
$(eval $(call KernelPackage,scsi-cdrom))
+
+
+define KernelPackage/scsi-tape
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Kernel support for scsi tape drives
+ DEPENDS:=+kmod-scsi-core
+ KCONFIG:= \
+ CONFIG_CHR_DEV_ST
+ FILES:= \
+ $(LINUX_DIR)/drivers/scsi/st.ko
+ AUTOLOAD:=$(call AutoLoad,45,st)
+endef
+
+$(eval $(call KernelPackage,scsi-tape))
+
+define KernelPackage/iosched-bfq
+ SUBMENU:=$(BLOCK_MENU)
+ TITLE:=Kernel support for BFQ I/O scheduler
+ KCONFIG:= \
+ CONFIG_IOSCHED_BFQ \
+ CONFIG_BFQ_GROUP_IOSCHED=y \
+ CONFIG_BFQ_CGROUP_DEBUG=n
+ FILES:= \
+ $(LINUX_DIR)/block/bfq.ko
+ AUTOLOAD:=$(call AutoLoad,10,bfq)
+endef
+
+$(eval $(call KernelPackage,iosched-bfq))