CONFIG_BT_BNEP \
CONFIG_BT_HCIBTUSB \
CONFIG_BT_HCIBTUSB_BCM=n \
+ CONFIG_BT_HCIBTUSB_MTK=y \
+ CONFIG_BT_HCIBTUSB_RTL=y \
CONFIG_BT_HCIUART \
CONFIG_BT_HCIUART_BCM=n \
CONFIG_BT_HCIUART_INTEL=n \
$(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
$(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
$(LINUX_DIR)/drivers/bluetooth/btusb.ko \
- $(LINUX_DIR)/drivers/bluetooth/btintel.ko
+ $(LINUX_DIR)/drivers/bluetooth/btintel.ko \
+ $(LINUX_DIR)/drivers/bluetooth/btrtl.ko \
+ $(LINUX_DIR)/drivers/bluetooth/btmtk.ko@ge5.17
AUTOLOAD:=$(call AutoProbe,bluetooth rfcomm bnep hidp hci_uart btusb)
endef
$(eval $(call KernelPackage,btmrvl))
+define KernelPackage/btsdio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Bluetooth HCI SDIO driver
+ DEPENDS:=+kmod-bluetooth +kmod-mmc
+ KCONFIG:= \
+ CONFIG_BT_HCIBTSDIO
+ FILES:= \
+ $(LINUX_DIR)/drivers/bluetooth/btsdio.ko
+ AUTOLOAD:=$(call AutoProbe,btsdio)
+endef
+
+define KernelPackage/btsdio/description
+ Kernel support for Bluetooth device with SDIO interface
+endef
+
+$(eval $(call KernelPackage,btsdio))
+
+
define KernelPackage/dma-buf
SUBMENU:=$(OTHER_MENU)
TITLE:=DMA shared buffer support
$(eval $(call KernelPackage,gpio-f7188x))
-define KernelPackage/gpio-mcp23s08
+define KernelPackage/lkdtm
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Linux Kernel Dump Test Tool Module
+ KCONFIG:=CONFIG_LKDTM
+ FILES:=$(LINUX_DIR)/drivers/misc/lkdtm/lkdtm.ko
+ AUTOLOAD:=$(call AutoProbe,lkdtm)
+endef
+
+define KernelPackage/lkdtm/description
+ This module enables testing of the different dumping mechanisms by inducing
+ system failures at predefined crash points.
+endef
+
+$(eval $(call KernelPackage,lkdtm))
+
+
+define KernelPackage/pinctrl-mcp23s08
SUBMENU:=$(OTHER_MENU)
TITLE:=Microchip MCP23xxx I/O expander
- DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +kmod-regmap-i2c
- KCONFIG:= \
- CONFIG_GPIO_MCP23S08 \
- CONFIG_PINCTRL_MCP23S08
- FILES:= \
- $(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08.ko
+ HIDDEN:=1
+ DEPENDS:=@GPIO_SUPPORT +kmod-regmap-core
+ KCONFIG:=CONFIG_PINCTRL_MCP23S08
+ FILES:=$(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08.ko
AUTOLOAD:=$(call AutoLoad,40,pinctrl-mcp23s08)
endef
-define KernelPackage/gpio-mcp23s08/description
- Kernel module for Microchip MCP23xxx SPI/I2C I/O expander
+define KernelPackage/pinctrl-mcp23s08/description
+ Kernel module for Microchip MCP23xxx I/O expander
endef
-$(eval $(call KernelPackage,gpio-mcp23s08))
+$(eval $(call KernelPackage,pinctrl-mcp23s08))
+
+
+define KernelPackage/pinctrl-mcp23s08-i2c
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Microchip MCP23xxx I/O expander (I2C)
+ DEPENDS:=@GPIO_SUPPORT \
+ +kmod-pinctrl-mcp23s08 \
+ +kmod-i2c-core \
+ +kmod-regmap-i2c
+ KCONFIG:=CONFIG_PINCTRL_MCP23S08_I2C
+ FILES:=$(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08_i2c.ko
+ AUTOLOAD:=$(call AutoLoad,40,pinctrl-mcp23s08-i2c)
+endef
+
+define KernelPackage/pinctrl-mcp23s08-i2c/description
+ Kernel module for Microchip MCP23xxx I/O expander via I2C
+endef
+
+$(eval $(call KernelPackage,pinctrl-mcp23s08-i2c))
+
+
+define KernelPackage/pinctrl-mcp23s08-spi
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Microchip MCP23xxx I/O expander (SPI)
+ DEPENDS:=@GPIO_SUPPORT +kmod-pinctrl-mcp23s08
+ KCONFIG:=CONFIG_PINCTRL_MCP23S08_SPI
+ FILES:=$(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08_spi.ko
+ AUTOLOAD:=$(call AutoLoad,40,pinctrl-mcp23s08-spi)
+endef
+
+define KernelPackage/pinctrl-mcp23s08-spi/description
+ Kernel module for Microchip MCP23xxx I/O expander via SPI
+endef
+
+$(eval $(call KernelPackage,pinctrl-mcp23s08-spi))
define KernelPackage/gpio-nxp-74hc164
CONFIG_MMC_BLOCK \
CONFIG_MMC_DEBUG=n \
CONFIG_MMC_UNSAFE_RESUME=n \
- CONFIG_MMC_BLOCK_BOUNCE=y \
CONFIG_MMC_TIFM_SD=n \
CONFIG_MMC_WBSD=n \
CONFIG_SDIO_UART=n
$(eval $(call KernelPackage,mmc))
-define KernelPackage/mvsdio
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Marvell MMC/SD/SDIO host driver
- DEPENDS:=+kmod-mmc @TARGET_kirkwood
- KCONFIG:= CONFIG_MMC_MVSDIO
- FILES:= \
- $(LINUX_DIR)/drivers/mmc/host/mvsdio.ko
- AUTOLOAD:=$(call AutoProbe,mvsdio,1)
-endef
-
-define KernelPackage/mvsdio/description
- Kernel support for the Marvell SDIO host driver.
-endef
-
-$(eval $(call KernelPackage,mvsdio))
-
-
define KernelPackage/sdhci
SUBMENU:=$(OTHER_MENU)
TITLE:=Secure Digital Host Controller Interface support
CONFIG_SSB_DRIVER_MIPS=n \
CONFIG_SSB_DRIVER_PCICORE=y \
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
+ CONFIG_SSB_FALLBACK_SPROM=y \
CONFIG_SSB_PCIHOST=y \
CONFIG_SSB_PCIHOST_POSSIBLE=y \
CONFIG_SSB_POSSIBLE=y \
CONFIG_BCMA \
CONFIG_BCMA_POSSIBLE=y \
CONFIG_BCMA_BLOCKIO=y \
+ CONFIG_BCMA_FALLBACK_SPROM=y \
CONFIG_BCMA_HOST_PCI_POSSIBLE=y \
CONFIG_BCMA_HOST_PCI=y \
CONFIG_BCMA_HOST_SOC=n \
$(eval $(call KernelPackage,rtc-pcf2127))
-define KernelPackage/rtc-pt7c4338
+define KernelPackage/rtc-r7301
SUBMENU:=$(OTHER_MENU)
- TITLE:=Pericom PT7C4338 RTC support
+ TITLE:=Epson RTC7301 support
DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
- DEPENDS:=+kmod-i2c-core
- KCONFIG:=CONFIG_RTC_DRV_PT7C4338 \
+ DEPENDS:=+kmod-regmap-mmio
+ KCONFIG:=CONFIG_RTC_DRV_R7301 \
CONFIG_RTC_CLASS=y
- FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
- AUTOLOAD:=$(call AutoProbe,rtc-pt7c4338)
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-r7301.ko
+ AUTOLOAD:=$(call AutoProbe,rtc-r7301)
endef
-define KernelPackage/rtc-pt7c4338/description
- Kernel module for Pericom PT7C4338 i2c RTC chip
+define KernelPackage/rtc-r7301/description
+ Kernel module for Epson RTC7301 RTC chip
endef
-$(eval $(call KernelPackage,rtc-pt7c4338))
+$(eval $(call KernelPackage,rtc-r7301))
define KernelPackage/rtc-rs5c372a
SUBMENU:=$(OTHER_MENU)
$(eval $(call KernelPackage,rtc-s35390a))
+define KernelPackage/rtc-x1205
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Xicor Intersil X1205
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_X1205 \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-x1205.ko
+ AUTOLOAD:=$(call AutoProbe,rtc-x1205)
+endef
+
+define KernelPackage/rtc-x1205/description
+ Kernel module for Xicor Intersil X1205 I2C RTC chip
+endef
+
+$(eval $(call KernelPackage,rtc-x1205))
define KernelPackage/mtdtests
SUBMENU:=$(OTHER_MENU)
SUBMENU:=$(OTHER_MENU)
TITLE:=Ramoops (pstore-ram)
DEFAULT:=m if ALL_KMODS
- KCONFIG:=CONFIG_PSTORE_RAM
+ KCONFIG:=CONFIG_PSTORE_RAM \
+ CONFIG_PSTORE_CONSOLE=y
DEPENDS:=+kmod-pstore +kmod-reed-solomon
FILES:= $(LINUX_DIR)/fs/pstore/ramoops.ko
AUTOLOAD:=$(call AutoLoad,30,ramoops,1)
KCONFIG:= CONFIG_SERIAL_8250_EXAR
FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250_exar.ko
AUTOLOAD:=$(call AutoProbe,8250 8250_base 8250_exar)
- DEPENDS:=+kmod-serial-8250
+ DEPENDS:=@PCI_SUPPORT +kmod-serial-8250
endef
define KernelPackage/serial-8250-exar/description
bool "lz4"
select PACKAGE_kmod-lib-lz4
+ config ZRAM_DEF_COMP_LZ4HC
+ bool "lz4-hc"
+ select PACKAGE_kmod-lib-lz4hc
+
config ZRAM_DEF_COMP_ZSTD
bool "zstd"
select PACKAGE_kmod-lib-zstd
TITLE:=TPM trusted keys on kernel keyring
DEPENDS:=@KERNEL_KEYS +kmod-crypto-hash +kmod-crypto-hmac +kmod-crypto-sha1 +kmod-tpm
KCONFIG:=CONFIG_TRUSTED_KEYS
- FILES:= \
- $(LINUX_DIR)/security/keys/trusted.ko@lt5.10 \
- $(LINUX_DIR)/security/keys/trusted-keys/trusted.ko@ge5.10
+ FILES:= $(LINUX_DIR)/security/keys/trusted-keys/trusted.ko
AUTOLOAD:=$(call AutoLoad,01,trusted-keys,1)
endef
define KernelPackage/tpm
SUBMENU:=$(OTHER_MENU)
TITLE:=TPM Hardware Support
- DEPENDS:= +kmod-random-core +(LINUX_5_15):kmod-asn1-decoder \
- +(LINUX_5_15):kmod-asn1-encoder +(LINUX_5_15):kmod-oid-registry
+ DEPENDS:= +kmod-random-core +kmod-asn1-decoder \
+ +kmod-asn1-encoder +kmod-oid-registry
KCONFIG:= CONFIG_TCG_TPM
FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm.ko
AUTOLOAD:=$(call AutoLoad,10,tpm,1)
$(eval $(call KernelPackage,i6300esb-wdt))
-define KernelPackage/w83627hf-wdt
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Winbond 83627HF Watchdog Timer
- KCONFIG:=CONFIG_W83627HF_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/w83627hf_wdt.ko
- AUTOLOAD:=$(call AutoLoad,50,w83627hf-wdt,1)
-endef
-
-define KernelPackage/w83627hf-wdt/description
- Kernel module for Winbond 83627HF Watchdog Timer
-endef
-
-$(eval $(call KernelPackage,w83627hf-wdt))
-
-
-define KernelPackage/itco-wdt
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Intel iTCO Watchdog Timer
- KCONFIG:=CONFIG_ITCO_WDT \
- CONFIG_ITCO_VENDOR_SUPPORT=y
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/iTCO_wdt.ko \
- $(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/iTCO_vendor_support.ko
- AUTOLOAD:=$(call AutoLoad,50,iTCO_vendor_support iTCO_wdt,1)
-endef
-
-define KernelPackage/itco-wdt/description
- Kernel module for Intel iTCO Watchdog Timer
-endef
-
-$(eval $(call KernelPackage,itco-wdt))
-
-
-define KernelPackage/it87-wdt
- SUBMENU:=$(OTHER_MENU)
- TITLE:=ITE IT87 Watchdog Timer
- KCONFIG:=CONFIG_IT87_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/it87_wdt.ko
- AUTOLOAD:=$(call AutoLoad,50,it87-wdt,1)
- MODPARAMS.it87-wdt:= \
- nogameport=1 \
- nocir=1
-endef
-
-define KernelPackage/it87-wdt/description
- Kernel module for ITE IT87 Watchdog Timer
-endef
-
-$(eval $(call KernelPackage,it87-wdt))
-
-
-define KernelPackage/f71808e-wdt
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Fintek F718xx/F818xx Watchdog Timer
- DEPENDS:=@TARGET_x86
- KCONFIG:=CONFIG_F71808E_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/f71808e_wdt.ko
- AUTOLOAD:=$(call AutoProbe,f71808e-wdt,1)
-endef
-
-define KernelPackage/f71808e-wdt/description
- Kernel module for the watchdog timer found on many Fintek Super-IO chips.
-endef
-
-$(eval $(call KernelPackage,f71808e-wdt))
-
define KernelPackage/mhi-bus
SUBMENU:=$(OTHER_MENU)
TITLE:=MHI bus
- DEPENDS:=@LINUX_5_15
KCONFIG:=CONFIG_MHI_BUS \
CONFIG_MHI_BUS_DEBUG=y
- FILES:=$(LINUX_DIR)/drivers/bus/mhi/core/mhi.ko
+ FILES:=$(LINUX_DIR)/drivers/bus/mhi/host/mhi.ko
AUTOLOAD:=$(call AutoProbe,mhi)
endef
define KernelPackage/mhi-pci-generic
SUBMENU:=$(OTHER_MENU)
TITLE:=MHI PCI controller driver
- DEPENDS:=@LINUX_5_15 +kmod-mhi-bus
+ DEPENDS:=@PCI_SUPPORT +kmod-mhi-bus
KCONFIG:=CONFIG_MHI_BUS_PCI_GENERIC
- FILES:=$(LINUX_DIR)/drivers/bus/mhi/mhi_pci_generic.ko
+ FILES:=$(LINUX_DIR)/drivers/bus/mhi/host/mhi_pci_generic.ko
AUTOLOAD:=$(call AutoProbe,mhi_pci_generic)
endef
projects / openwrt / staging / hauke.git / blobdiff