CONFIG_BT_BNEP \
CONFIG_BT_HCIBTUSB \
CONFIG_BT_HCIBTUSB_BCM=n \
+ CONFIG_BT_HCIBTUSB_MTK=y \
+ CONFIG_BT_HCIBTUSB_RTL=y \
CONFIG_BT_HCIUART \
CONFIG_BT_HCIUART_BCM=n \
CONFIG_BT_HCIUART_INTEL=n \
$(LINUX_DIR)/net/bluetooth/bnep/bnep.ko \
$(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
$(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
- $(LINUX_DIR)/drivers/bluetooth/btusb.ko
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,4.1.0)),1)
- FILES+= \
- $(LINUX_DIR)/drivers/bluetooth/btintel.ko
-endif
+ $(LINUX_DIR)/drivers/bluetooth/btusb.ko \
+ $(LINUX_DIR)/drivers/bluetooth/btintel.ko \
+ $(LINUX_DIR)/drivers/bluetooth/btrtl.ko
AUTOLOAD:=$(call AutoProbe,bluetooth rfcomm bnep hidp hci_uart btusb)
endef
KCONFIG:= \
CONFIG_BT_ATH3K \
CONFIG_BT_HCIUART_ATH3K=y
- $(call AddDepends/bluetooth)
FILES:= \
$(LINUX_DIR)/drivers/bluetooth/ath3k.ko
AUTOLOAD:=$(call AutoProbe,ath3k)
$(eval $(call KernelPackage,ath3k))
-define KernelPackage/bluetooth_6lowpan
+define KernelPackage/bluetooth-6lowpan
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth 6LoWPAN support
DEPENDS:=+kmod-6lowpan +kmod-bluetooth
AUTOLOAD:=$(call AutoProbe,bluetooth_6lowpan)
endef
-define KernelPackage/bluetooth_6lowpan/description
+define KernelPackage/bluetooth-6lowpan/description
Kernel support for 6LoWPAN over Bluetooth Low Energy devices
endef
-$(eval $(call KernelPackage,bluetooth_6lowpan))
+$(eval $(call KernelPackage,bluetooth-6lowpan))
define KernelPackage/btmrvl
KCONFIG:= \
CONFIG_BT_MRVL \
CONFIG_BT_MRVL_SDIO
- $(call AddDepends/bluetooth)
FILES:= \
$(LINUX_DIR)/drivers/bluetooth/btmrvl.ko \
$(LINUX_DIR)/drivers/bluetooth/btmrvl_sdio.ko
$(eval $(call KernelPackage,btmrvl))
+define KernelPackage/btsdio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Bluetooth HCI SDIO driver
+ DEPENDS:=+kmod-bluetooth +kmod-mmc
+ KCONFIG:= \
+ CONFIG_BT_HCIBTSDIO
+ FILES:= \
+ $(LINUX_DIR)/drivers/bluetooth/btsdio.ko
+ AUTOLOAD:=$(call AutoProbe,btsdio)
+endef
+
+define KernelPackage/btsdio/description
+ Kernel support for Bluetooth device with SDIO interface
+endef
+
+$(eval $(call KernelPackage,btsdio))
+
+
define KernelPackage/dma-buf
SUBMENU:=$(OTHER_MENU)
TITLE:=DMA shared buffer support
$(eval $(call KernelPackage,dma-buf))
-define KernelPackage/nvmem
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Non Volatile Memory support
- KCONFIG:=CONFIG_NVMEM
- HIDDEN:=1
- FILES:=$(LINUX_DIR)/drivers/nvmem/nvmem_core.ko
-endef
-
-define KernelPackage/nvmem/description
- Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES, etc.
-endef
-
-$(eval $(call KernelPackage,nvmem))
-
define KernelPackage/eeprom-93cx6
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM 93CX6 support
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT24 support
KCONFIG:=CONFIG_EEPROM_AT24
- DEPENDS:=+kmod-i2c-core +kmod-nvmem +LINUX_4_19:kmod-regmap-i2c
+ DEPENDS:=+kmod-i2c-core +kmod-regmap-i2c
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
AUTOLOAD:=$(call AutoProbe,at24)
endef
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT25 support
KCONFIG:=CONFIG_EEPROM_AT25
- DEPENDS:=+kmod-nvmem
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
AUTOLOAD:=$(call AutoProbe,at25)
endef
$(eval $(call KernelPackage,eeprom-at25))
-define KernelPackage/gpio-dev
+define KernelPackage/google-firmware
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Google firmware drivers (Coreboot, VPD, Memconsole)
+ KCONFIG:= \
+ CONFIG_GOOGLE_FIRMWARE=y \
+ CONFIG_GOOGLE_COREBOOT_TABLE \
+ CONFIG_GOOGLE_MEMCONSOLE \
+ CONFIG_GOOGLE_MEMCONSOLE_COREBOOT \
+ CONFIG_GOOGLE_VPD
+ FILES:= \
+ $(LINUX_DIR)/drivers/firmware/google/coreboot_table.ko \
+ $(LINUX_DIR)/drivers/firmware/google/memconsole.ko \
+ $(LINUX_DIR)/drivers/firmware/google/memconsole-coreboot.ko \
+ $(LINUX_DIR)/drivers/firmware/google/vpd-sysfs.ko
+ AUTOLOAD:=$(call AutoProbe,coreboot_table memconsole-coreboot vpd-sysfs)
+endef
+
+define KernelPackage/google-firmware/description
+ Kernel modules for Google firmware drivers. Useful for examining firmware and
+ boot details on devices using a Google bootloader based on Coreboot. Provides
+ files like /sys/firmware/log and /sys/firmware/vpd.
+endef
+
+$(eval $(call KernelPackage,google-firmware))
+
+
+define KernelPackage/gpio-f7188x
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Fintek F718xx/F818xx GPIO Support
+ DEPENDS:=@GPIO_SUPPORT @TARGET_x86
+ KCONFIG:=CONFIG_GPIO_F7188X
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-f7188x.ko
+ AUTOLOAD:=$(call AutoProbe,gpio-f7188x)
+endef
+
+define KernelPackage/gpio-f7188x/description
+ Kernel module for the GPIOs found on many Fintek Super-IO chips.
+endef
+
+$(eval $(call KernelPackage,gpio-f7188x))
+
+
+define KernelPackage/lkdtm
SUBMENU:=$(OTHER_MENU)
- TITLE:=Generic GPIO char device support
- DEPENDS:=@GPIO_SUPPORT
- KCONFIG:=CONFIG_GPIO_DEVICE
- FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.ko
- AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
+ TITLE:=Linux Kernel Dump Test Tool Module
+ KCONFIG:=CONFIG_LKDTM
+ FILES:=$(LINUX_DIR)/drivers/misc/lkdtm/lkdtm.ko
+ AUTOLOAD:=$(call AutoProbe,lkdtm)
endef
-define KernelPackage/gpio-dev/description
- Kernel module to allows control of GPIO pins using a character device.
+define KernelPackage/lkdtm/description
+ This module enables testing of the different dumping mechanisms by inducing
+ system failures at predefined crash points.
endef
-$(eval $(call KernelPackage,gpio-dev))
+$(eval $(call KernelPackage,lkdtm))
-define KernelPackage/gpio-mcp23s08
+define KernelPackage/pinctrl-mcp23s08
SUBMENU:=$(OTHER_MENU)
TITLE:=Microchip MCP23xxx I/O expander
- DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +kmod-regmap-i2c
- KCONFIG:= \
- CONFIG_GPIO_MCP23S08 \
- CONFIG_PINCTRL_MCP23S08
- FILES:= \
- $(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08.ko
+ HIDDEN:=1
+ DEPENDS:=@GPIO_SUPPORT +kmod-regmap-core
+ KCONFIG:=CONFIG_PINCTRL_MCP23S08
+ FILES:=$(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08.ko
AUTOLOAD:=$(call AutoLoad,40,pinctrl-mcp23s08)
endef
-define KernelPackage/gpio-mcp23s08/description
- Kernel module for Microchip MCP23xxx SPI/I2C I/O expander
+define KernelPackage/pinctrl-mcp23s08/description
+ Kernel module for Microchip MCP23xxx I/O expander
+endef
+
+$(eval $(call KernelPackage,pinctrl-mcp23s08))
+
+
+define KernelPackage/pinctrl-mcp23s08-i2c
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Microchip MCP23xxx I/O expander (I2C)
+ DEPENDS:=@GPIO_SUPPORT \
+ +kmod-pinctrl-mcp23s08 \
+ +kmod-i2c-core \
+ +kmod-regmap-i2c
+ KCONFIG:=CONFIG_PINCTRL_MCP23S08_I2C
+ FILES:=$(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08_i2c.ko
+ AUTOLOAD:=$(call AutoLoad,40,pinctrl-mcp23s08-i2c)
+endef
+
+define KernelPackage/pinctrl-mcp23s08-i2c/description
+ Kernel module for Microchip MCP23xxx I/O expander via I2C
+endef
+
+$(eval $(call KernelPackage,pinctrl-mcp23s08-i2c))
+
+
+define KernelPackage/pinctrl-mcp23s08-spi
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Microchip MCP23xxx I/O expander (SPI)
+ DEPENDS:=@GPIO_SUPPORT +kmod-pinctrl-mcp23s08
+ KCONFIG:=CONFIG_PINCTRL_MCP23S08_SPI
+ FILES:=$(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08_spi.ko
+ AUTOLOAD:=$(call AutoLoad,40,pinctrl-mcp23s08-spi)
+endef
+
+define KernelPackage/pinctrl-mcp23s08-spi/description
+ Kernel module for Microchip MCP23xxx I/O expander via SPI
endef
-$(eval $(call KernelPackage,gpio-mcp23s08))
+$(eval $(call KernelPackage,pinctrl-mcp23s08-spi))
define KernelPackage/gpio-nxp-74hc164
define KernelPackage/gpio-pca953x
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core
+ DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +kmod-regmap-i2c
TITLE:=PCA95xx, TCA64xx, and MAX7310 I/O ports
KCONFIG:=CONFIG_GPIO_PCA953X
FILES:=$(LINUX_DIR)/drivers/gpio/gpio-pca953x.ko
$(eval $(call KernelPackage,gpio-pcf857x))
+define KernelPackage/gpio-it87
+ SUBMENU:=$(OTHER_MENU)
+ DEPENDS:=@GPIO_SUPPORT @TARGET_x86
+ TITLE:=GPIO support for IT87xx Super I/O chips
+ KCONFIG:=CONFIG_GPIO_IT87
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-it87.ko
+ AUTOLOAD:=$(call AutoLoad,25,gpio-it87,1)
+endef
+
+define KernelPackage/gpio-it87/description
+ This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and
+ supports the IT8761E, IT8613, IT8620E, and IT8628E Super I/O chips as
+ well.
+endef
+
+$(eval $(call KernelPackage,gpio-it87))
+
+
+define KernelPackage/gpio-amd-fch
+ SUBMENU:=$(OTHER_MENU)
+ DEPENDS:=@GPIO_SUPPORT @TARGET_x86
+ TITLE:=GPIO support for AMD Fusion Controller Hub (G-series SOCs)
+ KCONFIG:=CONFIG_GPIO_AMD_FCH
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-amd-fch.ko
+ AUTOLOAD:=$(call AutoLoad,25,gpio-amd-fch,1)
+endef
+
+define KernelPackage/gpio-amd-fch/description
+ This option enables driver for GPIO on AMDs Fusion Controller Hub,
+ as found on G-series SOCs (eg. GX-412TC)
+endef
+
+$(eval $(call KernelPackage,gpio-amd-fch))
+
+
define KernelPackage/ppdev
SUBMENU:=$(OTHER_MENU)
TITLE:=Parallel port support
CONFIG_MMC_BLOCK \
CONFIG_MMC_DEBUG=n \
CONFIG_MMC_UNSAFE_RESUME=n \
- CONFIG_MMC_BLOCK_BOUNCE=y \
CONFIG_MMC_TIFM_SD=n \
CONFIG_MMC_WBSD=n \
CONFIG_SDIO_UART=n
define KernelPackage/ssb
SUBMENU:=$(OTHER_MENU)
TITLE:=Silicon Sonics Backplane glue code
- DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
+ DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_bcm63xx
KCONFIG:=\
CONFIG_SSB \
CONFIG_SSB_B43_PCI_BRIDGE=y \
CONFIG_SSB_DRIVER_MIPS=n \
CONFIG_SSB_DRIVER_PCICORE=y \
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
+ CONFIG_SSB_FALLBACK_SPROM=y \
CONFIG_SSB_PCIHOST=y \
CONFIG_SSB_PCIHOST_POSSIBLE=y \
CONFIG_SSB_POSSIBLE=y \
define KernelPackage/bcma
SUBMENU:=$(OTHER_MENU)
TITLE:=BCMA support
- DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_bcm53xx
+ DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_bcm53xx
KCONFIG:=\
CONFIG_BCMA \
CONFIG_BCMA_POSSIBLE=y \
CONFIG_BCMA_BLOCKIO=y \
+ CONFIG_BCMA_FALLBACK_SPROM=y \
CONFIG_BCMA_HOST_PCI_POSSIBLE=y \
CONFIG_BCMA_HOST_PCI=y \
CONFIG_BCMA_HOST_SOC=n \
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF2123 RTC support
DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-regmap-spi
KCONFIG:=CONFIG_RTC_DRV_PCF2123 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
$(eval $(call KernelPackage,rtc-pcf2127))
-define KernelPackage/rtc-pt7c4338
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Pericom PT7C4338 RTC support
- DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
- DEPENDS:=+kmod-i2c-core
- KCONFIG:=CONFIG_RTC_DRV_PT7C4338 \
- CONFIG_RTC_CLASS=y
- FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
- AUTOLOAD:=$(call AutoProbe,rtc-pt7c4338)
-endef
-
-define KernelPackage/rtc-pt7c4338/description
- Kernel module for Pericom PT7C4338 i2c RTC chip
-endef
-
-$(eval $(call KernelPackage,rtc-pt7c4338))
define KernelPackage/rtc-rs5c372a
SUBMENU:=$(OTHER_MENU)
$(eval $(call KernelPackage,rtc-rx8025))
+define KernelPackage/rtc-s35390a
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Seico S-35390A
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_S35390A \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-s35390a.ko
+ AUTOLOAD:=$(call AutoLoad,50,rtc-s35390a,1)
+endef
+
+define KernelPackage/rtc-s35390a/description
+ Kernel module for Seiko Instruments S-35390A I2C RTC chip
+endef
+
+$(eval $(call KernelPackage,rtc-s35390a))
+
define KernelPackage/mtdtests
SUBMENU:=$(OTHER_MENU)
$(eval $(call KernelPackage,mtdram))
+define KernelPackage/ramoops
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Ramoops (pstore-ram)
+ DEFAULT:=m if ALL_KMODS
+ KCONFIG:=CONFIG_PSTORE_RAM \
+ CONFIG_PSTORE_CONSOLE=y
+ DEPENDS:=+kmod-pstore +kmod-reed-solomon
+ FILES:= $(LINUX_DIR)/fs/pstore/ramoops.ko
+ AUTOLOAD:=$(call AutoLoad,30,ramoops,1)
+endef
+
+define KernelPackage/ramoops/description
+ Kernel module for pstore-ram (ramoops) crash log storage
+endef
+
+$(eval $(call KernelPackage,ramoops))
+
+
+define KernelPackage/reed-solomon
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Reed-Solomon error correction
+ DEFAULT:=m if ALL_KMODS
+ KCONFIG:=CONFIG_REED_SOLOMON \
+ CONFIG_REED_SOLOMON_DEC8=y \
+ CONFIG_REED_SOLOMON_ENC8=y
+ FILES:= $(LINUX_DIR)/lib/reed_solomon/reed_solomon.ko
+ AUTOLOAD:=$(call AutoLoad,30,reed_solomon,1)
+endef
+
+define KernelPackage/reed-solomon/description
+ Kernel module for Reed-Solomon error correction
+endef
+
+$(eval $(call KernelPackage,reed-solomon))
+
+
define KernelPackage/serial-8250
SUBMENU:=$(OTHER_MENU)
TITLE:=8250 UARTs
FILES:= \
$(LINUX_DIR)/drivers/tty/serial/8250/8250.ko \
$(LINUX_DIR)/drivers/tty/serial/8250/8250_base.ko \
- $(if $(CONFIG_PCI),$(LINUX_DIR)/drivers/tty/serial/8250/8250_pci.ko)
+ $(if $(CONFIG_PCI),$(LINUX_DIR)/drivers/tty/serial/8250/8250_pci.ko) \
+ $(if $(CONFIG_GPIOLIB),$(LINUX_DIR)/drivers/tty/serial/serial_mctrl_gpio.ko)
AUTOLOAD:=$(call AutoProbe,8250 8250_base 8250_pci)
endef
define KernelPackage/zram
SUBMENU:=$(OTHER_MENU)
TITLE:=ZRAM
- DEPENDS:=+kmod-lib-lzo +kmod-lib-lz4
KCONFIG:= \
CONFIG_ZSMALLOC \
CONFIG_ZRAM \
CONFIG_ZRAM_DEBUG=n \
- CONFIG_PGTABLE_MAPPING=n \
CONFIG_ZRAM_WRITEBACK=n \
- CONFIG_ZSMALLOC_STAT=n \
- CONFIG_ZRAM_LZ4_COMPRESS=y
+ CONFIG_ZSMALLOC_STAT=n
FILES:= \
$(LINUX_DIR)/mm/zsmalloc.ko \
$(LINUX_DIR)/drivers/block/zram/zram.ko
Compressed RAM block device support
endef
-$(eval $(call KernelPackage,zram))
+define KernelPackage/zram/config
+ choice
+ prompt "ZRAM Default compressor"
+ default ZRAM_DEF_COMP_LZORLE
+
+ config ZRAM_DEF_COMP_LZORLE
+ bool "lzo-rle"
+ select PACKAGE_kmod-lib-lzo
+
+ config ZRAM_DEF_COMP_LZO
+ bool "lzo"
+ select PACKAGE_kmod-lib-lzo
+
+ config ZRAM_DEF_COMP_LZ4
+ bool "lz4"
+ select PACKAGE_kmod-lib-lz4
+
+ config ZRAM_DEF_COMP_LZ4HC
+ bool "lz4-hc"
+ select PACKAGE_kmod-lib-lz4hc
+
+ config ZRAM_DEF_COMP_ZSTD
+ bool "zstd"
+ select PACKAGE_kmod-lib-zstd
+ endchoice
+endef
+
+$(eval $(call KernelPackage,zram))
define KernelPackage/pps
SUBMENU:=$(OTHER_MENU)
$(eval $(call KernelPackage,ptp))
-define KernelPackage/ptp-gianfar
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Freescale Gianfar PTP support
- DEPENDS:=@TARGET_mpc85xx +kmod-ptp @!LINUX_4_19
- KCONFIG:=CONFIG_PTP_1588_CLOCK_GIANFAR
- FILES:=$(LINUX_DIR)/drivers/net/ethernet/freescale/gianfar_ptp.ko
- AUTOLOAD:=$(call AutoProbe,gianfar_ptp)
-endef
-
-define KernelPackage/ptp-gianfar/description
- Kernel module for IEEE 1588 support for Freescale
- Gianfar Ethernet drivers
-endef
-
-$(eval $(call KernelPackage,ptp-gianfar))
-
define KernelPackage/ptp-qoriq
SUBMENU:=$(OTHER_MENU)
TITLE:=Freescale QorIQ PTP support
- DEPENDS:=@TARGET_mpc85xx +kmod-ptp @LINUX_4_19
+ DEPENDS:=@(TARGET_mpc85xx||TARGET_qoriq) +kmod-ptp
KCONFIG:=CONFIG_PTP_1588_CLOCK_QORIQ
- FILES:=$(LINUX_DIR)/drivers/ptp/ptp_qoriq.o
- AUTOLOAD:=$(call AutoProbe,ptp_qoriq)
+ FILES:=$(LINUX_DIR)/drivers/ptp/ptp-qoriq.ko
+ AUTOLOAD:=$(call AutoProbe,ptp-qoriq)
endef
$(eval $(call KernelPackage,random-core))
-define KernelPackage/random-tpm
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Hardware Random Number Generator TPM support
- KCONFIG:=CONFIG_HW_RANDOM_TPM
- FILES:=$(LINUX_DIR)/drivers/char/hw_random/tpm-rng.ko
- DEPENDS:= +kmod-random-core +kmod-tpm @!LINUX_4_19
- AUTOLOAD:=$(call AutoProbe,tpm-rng)
-endef
-
-define KernelPackage/random-tpm/description
- Kernel module for the Random Number Generator
- in the Trusted Platform Module.
-endef
-
-$(eval $(call KernelPackage,random-tpm))
-
define KernelPackage/thermal
SUBMENU:=$(OTHER_MENU)
- TITLE:=Generic Thermal sysfs driver
+ TITLE:=Thermal driver
DEPENDS:=+kmod-hwmon-core
HIDDEN:=1
KCONFIG:= \
- CONFIG_THERMAL \
+ CONFIG_THERMAL=y \
CONFIG_THERMAL_OF=y \
CONFIG_CPU_THERMAL=y \
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y \
CONFIG_THERMAL_GOV_USER_SPACE=n \
CONFIG_THERMAL_HWMON=y \
CONFIG_THERMAL_EMULATION=n
- FILES:=$(LINUX_DIR)/drivers/thermal/thermal_sys.ko
- AUTOLOAD:=$(call AutoProbe,thermal_sys)
endef
define KernelPackage/thermal/description
- Generic Thermal Sysfs driver offers a generic mechanism for thermal
- management. Usually it's made up of one or more thermal zone and cooling
- device.
+ Thermal driver offers a generic mechanism for thermal management.
+ Usually it's made up of one or more thermal zone and cooling device.
endef
$(eval $(call KernelPackage,thermal))
$(eval $(call KernelPackage,echo))
-define KernelPackage/bmp085
+define KernelPackage/keys-encrypted
SUBMENU:=$(OTHER_MENU)
- TITLE:=BMP085/BMP18x pressure sensor
- DEPENDS:= +kmod-regmap-core
- KCONFIG:= CONFIG_BMP085
- FILES:= $(LINUX_DIR)/drivers/misc/bmp085.ko
+ TITLE:=encrypted keys on kernel keyring
+ DEPENDS:=@KERNEL_KEYS +kmod-crypto-cbc +kmod-crypto-hmac +kmod-crypto-rng \
+ +kmod-crypto-sha256 +kmod-keys-trusted
+ KCONFIG:=CONFIG_ENCRYPTED_KEYS
+ FILES:=$(LINUX_DIR)/security/keys/encrypted-keys/encrypted-keys.ko
+ AUTOLOAD:=$(call AutoLoad,01,encrypted-keys,1)
endef
-define KernelPackage/bmp085/description
- This driver adds support for Bosch Sensortec's digital pressure
- sensors BMP085 and BMP18x.
+define KernelPackage/keys-encrypted/description
+ This module provides support for create/encrypting/decrypting keys
+ in the kernel. Encrypted keys are kernel generated random numbers,
+ which are encrypted/decrypted with a 'master' symmetric key. The
+ 'master' key can be either a trusted-key or user-key type.
+ Userspace only ever sees/stores encrypted blobs.
endef
-$(eval $(call KernelPackage,bmp085))
+$(eval $(call KernelPackage,keys-encrypted))
-define KernelPackage/bmp085-i2c
+define KernelPackage/keys-trusted
SUBMENU:=$(OTHER_MENU)
- TITLE:=BMP085/BMP18x pressure sensor I2C
- DEPENDS:= +kmod-bmp085
- KCONFIG:= CONFIG_BMP085_I2C
- FILES:= $(LINUX_DIR)/drivers/misc/bmp085-i2c.ko
- AUTOLOAD:=$(call AutoProbe,bmp085-i2c)
+ TITLE:=TPM trusted keys on kernel keyring
+ DEPENDS:=@KERNEL_KEYS +kmod-crypto-hash +kmod-crypto-hmac +kmod-crypto-sha1 +kmod-tpm
+ KCONFIG:=CONFIG_TRUSTED_KEYS
+ FILES:= $(LINUX_DIR)/security/keys/trusted-keys/trusted.ko
+ AUTOLOAD:=$(call AutoLoad,01,trusted-keys,1)
endef
-define KernelPackage/bmp085-i2c/description
- This driver adds support for Bosch Sensortec's digital pressure
- sensor connected via I2C.
-endef
-
-$(eval $(call KernelPackage,bmp085-i2c))
-
-define KernelPackage/bmp085-spi
- SUBMENU:=$(OTHER_MENU)
- TITLE:=BMP085/BMP18x pressure sensor SPI
- DEPENDS:= +kmod-bmp085
- KCONFIG:= CONFIG_BMP085_SPI
- FILES:= $(LINUX_DIR)/drivers/misc/bmp085-spi.ko
- AUTOLOAD:=$(call AutoProbe,bmp085-spi)
-endef
-define KernelPackage/bmp085-spi/description
- This driver adds support for Bosch Sensortec's digital pressure
- sensor connected via SPI.
+define KernelPackage/keys-trusted/description
+ This module provides support for creating, sealing, and unsealing
+ keys in the kernel. Trusted keys are random number symmetric keys,
+ generated and RSA-sealed by the TPM. The TPM only unseals the keys,
+ if the boot PCRs and other criteria match. Userspace will only ever
+ see encrypted blobs.
endef
-$(eval $(call KernelPackage,bmp085-spi))
+$(eval $(call KernelPackage,keys-trusted))
+
define KernelPackage/tpm
SUBMENU:=$(OTHER_MENU)
TITLE:=TPM Hardware Support
- DEPENDS:= +!LINUX_4_14:kmod-random-core
+ DEPENDS:= +kmod-random-core +(LINUX_5_15):kmod-asn1-decoder \
+ +(LINUX_5_15):kmod-asn1-encoder +(LINUX_5_15):kmod-oid-registry
KCONFIG:= CONFIG_TCG_TPM
FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm.ko
AUTOLOAD:=$(call AutoLoad,10,tpm,1)
$(eval $(call KernelPackage,tpm-i2c-infineon))
-define KernelPackage/w83627hf-wdt
+define KernelPackage/i6300esb-wdt
SUBMENU:=$(OTHER_MENU)
- TITLE:=Winbond 83627HF Watchdog Timer
- KCONFIG:=CONFIG_W83627HF_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/w83627hf_wdt.ko
- AUTOLOAD:=$(call AutoLoad,50,w83627hf-wdt,1)
+ TITLE:=Intel 6300ESB Timer/Watchdog
+ DEPENDS:=@PCI_SUPPORT @!SMALL_FLASH
+ KCONFIG:=CONFIG_I6300ESB_WDT \
+ CONFIG_WATCHDOG_CORE=y
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/i6300esb.ko
+ AUTOLOAD:=$(call AutoLoad,50,i6300esb,1)
endef
-define KernelPackage/w83627hf-wdt/description
- Kernel module for Winbond 83627HF Watchdog Timer
+define KernelPackage/i6300esb-wdt/description
+ Kernel module for the watchdog timer built into the Intel
+ 6300ESB controller hub. Also used by QEMU/libvirt.
endef
-$(eval $(call KernelPackage,w83627hf-wdt))
+$(eval $(call KernelPackage,i6300esb-wdt))
-define KernelPackage/itco-wdt
+define KernelPackage/mhi-bus
SUBMENU:=$(OTHER_MENU)
- TITLE:=Intel iTCO Watchdog Timer
- KCONFIG:=CONFIG_ITCO_WDT \
- CONFIG_ITCO_VENDOR_SUPPORT=y
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/iTCO_wdt.ko \
- $(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/iTCO_vendor_support.ko
- AUTOLOAD:=$(call AutoLoad,50,iTCO_vendor_support iTCO_wdt,1)
+ TITLE:=MHI bus
+ DEPENDS:=@LINUX_5_15
+ KCONFIG:=CONFIG_MHI_BUS \
+ CONFIG_MHI_BUS_DEBUG=y
+ FILES:=$(LINUX_DIR)/drivers/bus/mhi/core/mhi.ko
+ AUTOLOAD:=$(call AutoProbe,mhi)
endef
-define KernelPackage/itco-wdt/description
- Kernel module for Intel iTCO Watchdog Timer
+define KernelPackage/mhi-bus/description
+ Kernel module for the Qualcomm MHI bus.
endef
-$(eval $(call KernelPackage,itco-wdt))
-
+$(eval $(call KernelPackage,mhi-bus))
-define KernelPackage/it87-wdt
+define KernelPackage/mhi-pci-generic
SUBMENU:=$(OTHER_MENU)
- TITLE:=ITE IT87 Watchdog Timer
- KCONFIG:=CONFIG_IT87_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/it87_wdt.ko
- AUTOLOAD:=$(call AutoLoad,50,it87-wdt,1)
- MODPARAMS.it87-wdt:= \
- nogameport=1 \
- nocir=1
+ TITLE:=MHI PCI controller driver
+ DEPENDS:=@LINUX_5_15 +kmod-mhi-bus
+ KCONFIG:=CONFIG_MHI_BUS_PCI_GENERIC
+ FILES:=$(LINUX_DIR)/drivers/bus/mhi/mhi_pci_generic.ko
+ AUTOLOAD:=$(call AutoProbe,mhi_pci_generic)
endef
-define KernelPackage/it87-wdt/description
- Kernel module for ITE IT87 Watchdog Timer
+define KernelPackage/mhi-pci-generic/description
+ Kernel module for the MHI PCI controller driver.
endef
-$(eval $(call KernelPackage,it87-wdt))
+$(eval $(call KernelPackage,mhi-pci-generic))