#
-# Copyright (C) 2006-2012 OpenWrt.org
+# Copyright (C) 2006-2015 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
WATCHDOG_DIR:=watchdog
+define KernelPackage/6lowpan
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=6LoWPAN shared code
+ KCONFIG:= \
+ CONFIG_6LOWPAN \
+ CONFIG_6LOWPAN_NHC=n
+ FILES:=$(LINUX_DIR)/net/6lowpan/6lowpan.ko
+ AUTOLOAD:=$(call AutoProbe,6lowpan)
+endef
+
+define KernelPackage/6lowpan/description
+ Shared 6lowpan code for IEEE 802.15.4 and Bluetooth.
+endef
+
+$(eval $(call KernelPackage,6lowpan))
+
+
define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash
+ DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +kmod-crypto-ecb +kmod-lib-crc16 +kmod-hid +!LINUX_3_18:kmod-crypto-cmac +!LINUX_3_18:kmod-regmap +LINUX_4_14:kmod-crypto-ecdh
KCONFIG:= \
- CONFIG_BLUEZ \
- CONFIG_BLUEZ_L2CAP \
- CONFIG_BLUEZ_SCO \
- CONFIG_BLUEZ_RFCOMM \
- CONFIG_BLUEZ_BNEP \
- CONFIG_BLUEZ_HCIUART \
- CONFIG_BLUEZ_HCIUSB \
- CONFIG_BLUEZ_HIDP \
CONFIG_BT \
- CONFIG_BT_L2CAP=y \
- CONFIG_BT_SCO=y \
+ CONFIG_BT_BREDR=y \
+ CONFIG_BT_DEBUGFS=n \
+ CONFIG_BT_LE=y \
CONFIG_BT_RFCOMM \
CONFIG_BT_BNEP \
CONFIG_BT_HCIBTUSB \
- CONFIG_BT_HCIUSB \
+ CONFIG_BT_HCIBTUSB_BCM=n \
CONFIG_BT_HCIUART \
+ CONFIG_BT_HCIUART_BCM=n \
+ CONFIG_BT_HCIUART_INTEL=n \
CONFIG_BT_HCIUART_H4 \
- CONFIG_BT_HIDP \
- CONFIG_HID_SUPPORT=y
- $(call AddDepends/crc16)
- $(call AddDepends/hid)
+ CONFIG_BT_HCIUART_NOKIA=n \
+ CONFIG_BT_HIDP
$(call AddDepends/rfkill)
FILES:= \
$(LINUX_DIR)/net/bluetooth/bluetooth.ko \
$(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
$(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
$(LINUX_DIR)/drivers/bluetooth/btusb.ko
- AUTOLOAD:=$(call AutoLoad,90,bluetooth rfcomm bnep hidp hci_uart btusb)
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,4.1.0)),1)
+ FILES+= \
+ $(LINUX_DIR)/drivers/bluetooth/btintel.ko
+endif
+ AUTOLOAD:=$(call AutoProbe,bluetooth rfcomm bnep hidp hci_uart btusb)
endef
define KernelPackage/bluetooth/description
$(eval $(call KernelPackage,bluetooth))
+define KernelPackage/ath3k
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=ATH3K Kernel Module support
+ DEPENDS:=+kmod-bluetooth +ar3k-firmware
+ KCONFIG:= \
+ CONFIG_BT_ATH3K \
+ CONFIG_BT_HCIUART_ATH3K=y
+ $(call AddDepends/bluetooth)
+ FILES:= \
+ $(LINUX_DIR)/drivers/bluetooth/ath3k.ko
+ AUTOLOAD:=$(call AutoProbe,ath3k)
+endef
+
+define KernelPackage/ath3k/description
+ Kernel support for ATH3K Module
+endef
+
+$(eval $(call KernelPackage,ath3k))
+
+
+define KernelPackage/bluetooth_6lowpan
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Bluetooth 6LoWPAN support
+ DEPENDS:=+kmod-6lowpan +kmod-bluetooth
+ KCONFIG:=CONFIG_BT_6LOWPAN
+ FILES:=$(LINUX_DIR)/net/bluetooth/bluetooth_6lowpan.ko
+ AUTOLOAD:=$(call AutoProbe,bluetooth_6lowpan)
+endef
+
+define KernelPackage/bluetooth_6lowpan/description
+ Kernel support for 6LoWPAN over Bluetooth Low Energy devices
+endef
+
+$(eval $(call KernelPackage,bluetooth_6lowpan))
+
+
+define KernelPackage/btmrvl
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Marvell Bluetooth Kernel Module support
+ DEPENDS:=+kmod-mmc +kmod-bluetooth +mwifiex-sdio-firmware
+ KCONFIG:= \
+ CONFIG_BT_MRVL \
+ CONFIG_BT_MRVL_SDIO
+ $(call AddDepends/bluetooth)
+ FILES:= \
+ $(LINUX_DIR)/drivers/bluetooth/btmrvl.ko \
+ $(LINUX_DIR)/drivers/bluetooth/btmrvl_sdio.ko
+ AUTOLOAD:=$(call AutoProbe,btmrvl btmrvl_sdio)
+endef
+
+define KernelPackage/btmrvl/description
+ Kernel support for Marvell SDIO Bluetooth Module
+endef
+
+$(eval $(call KernelPackage,btmrvl))
-define KernelPackage/bluetooth-hci-h4p
+
+define KernelPackage/dma-buf
SUBMENU:=$(OTHER_MENU)
- TITLE:=HCI driver with H4 Nokia extensions
- DEPENDS:=@TARGET_omap24xx +kmod-bluetooth
- KCONFIG:=CONFIG_BT_HCIH4P
- FILES:=$(LINUX_DIR)/drivers/bluetooth/hci_h4p/hci_h4p.ko
- AUTOLOAD:=$(call AutoLoad,91,hci_h4p)
+ TITLE:=DMA shared buffer support
+ HIDDEN:=1
+ KCONFIG:=CONFIG_DMA_SHARED_BUFFER
+ FILES:=$(LINUX_DIR)/drivers/dma-buf/dma-shared-buffer.ko
+ AUTOLOAD:=$(call AutoLoad,20,dma-shared-buffer)
endef
+$(eval $(call KernelPackage,dma-buf))
+
-define KernelPackage/bluetooth-hci-h4p/description
- HCI driver with H4 Nokia extensions
+define KernelPackage/nvmem
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Non Volatile Memory support
+ KCONFIG:=CONFIG_NVMEM
+ HIDDEN:=1
+ FILES:=$(LINUX_DIR)/drivers/nvmem/nvmem_core.ko@ge4.9
endef
-$(eval $(call KernelPackage,bluetooth-hci-h4p))
+define KernelPackage/nvmem/description
+ Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES, etc.
+endef
+$(eval $(call KernelPackage,nvmem))
define KernelPackage/eeprom-93cx6
SUBMENU:=$(OTHER_MENU)
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT24 support
KCONFIG:=CONFIG_EEPROM_AT24
- DEPENDS:=+kmod-i2c-core
+ DEPENDS:=+kmod-i2c-core +kmod-nvmem
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
- AUTOLOAD:=$(call AutoLoad,60,at24)
+ AUTOLOAD:=$(call AutoProbe,at24)
endef
define KernelPackage/eeprom-at24/description
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT25 support
KCONFIG:=CONFIG_EEPROM_AT25
+ DEPENDS:=+kmod-nvmem
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
- AUTOLOAD:=$(call AutoLoad,61,at25)
+ AUTOLOAD:=$(call AutoProbe,at25)
endef
define KernelPackage/eeprom-at25/description
define KernelPackage/gpio-mcp23s08
SUBMENU:=$(OTHER_MENU)
TITLE:=Microchip MCP23xxx I/O expander
- DEPENDS:=@GPIO_SUPPORT +PACKAGE_kmod-i2c-core:kmod-i2c-core
- KCONFIG:=CONFIG_GPIO_MCP23S08
- FILES:=$(LINUX_DIR)/drivers/gpio/gpio-mcp23s08.ko
- AUTOLOAD:=$(call AutoLoad,40,gpio-mcp23s08)
+ DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +LINUX_4_14:kmod-regmap
+ KCONFIG:= \
+ CONFIG_GPIO_MCP23S08 \
+ CONFIG_PINCTRL_MCP23S08
+ FILES:= \
+ $(LINUX_DIR)/drivers/gpio/gpio-mcp23s08.ko@lt4.13 \
+ $(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08.ko@ge4.13
+ AUTOLOAD:=$(call AutoLoad,40,gpio-mcp23s08@lt4.13 pinctrl-mcp23s08@ge4.13)
endef
define KernelPackage/gpio-mcp23s08/description
define KernelPackage/gpio-nxp-74hc164
SUBMENU:=$(OTHER_MENU)
TITLE:=NXP 74HC164 GPIO expander support
- KCONFIG:=CONFIG_GPIO_NXP_74HC164
- FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.ko
- AUTOLOAD:=$(call AutoLoad,99,nxp_74hc164)
+ KCONFIG:=CONFIG_GPIO_74X164
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-74x164.ko
+ AUTOLOAD:=$(call AutoProbe,gpio-74x164)
endef
define KernelPackage/gpio-nxp-74hc164/description
$(eval $(call KernelPackage,gpio-nxp-74hc164))
+define KernelPackage/gpio-pca953x
+ SUBMENU:=$(OTHER_MENU)
+ DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core
+ TITLE:=PCA95xx, TCA64xx, and MAX7310 I/O ports
+ KCONFIG:=CONFIG_GPIO_PCA953X
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-pca953x.ko
+ AUTOLOAD:=$(call AutoLoad,55,gpio-pca953x)
+endef
+
+define KernelPackage/gpio-pca953x/description
+ Kernel module for MAX731{0,2,3,5}, PCA6107, PCA953{4-9}, PCA955{4-7},
+ PCA957{4,5} and TCA64{08,16} I2C GPIO expanders
+endef
+
+$(eval $(call KernelPackage,gpio-pca953x))
+
define KernelPackage/gpio-pcf857x
SUBMENU:=$(OTHER_MENU)
DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core
$(eval $(call KernelPackage,gpio-pcf857x))
-define KernelPackage/lp
+
+define KernelPackage/ppdev
SUBMENU:=$(OTHER_MENU)
- TITLE:=Parallel port and line printer support
- DEPENDS:=@BROKEN
+ TITLE:=Parallel port support
KCONFIG:= \
CONFIG_PARPORT \
- CONFIG_PRINTER \
CONFIG_PPDEV
FILES:= \
$(LINUX_DIR)/drivers/parport/parport.ko \
- $(LINUX_DIR)/drivers/char/lp.ko \
$(LINUX_DIR)/drivers/char/ppdev.ko
- AUTOLOAD:=$(call AutoLoad,50,parport lp)
+ AUTOLOAD:=$(call AutoLoad,50,parport ppdev)
+endef
+
+$(eval $(call KernelPackage,ppdev))
+
+
+define KernelPackage/parport-pc
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Parallel port interface (PC-style) support
+ DEPENDS:=+kmod-ppdev
+ KCONFIG:= \
+ CONFIG_KS0108=n \
+ CONFIG_PARPORT_PC \
+ CONFIG_PARPORT_1284=y \
+ CONFIG_PARPORT_PC_FIFO=y \
+ CONFIG_PARPORT_PC_PCMCIA=n \
+ CONFIG_PARPORT_PC_SUPERIO=y \
+ CONFIG_PARPORT_SERIAL=n \
+ CONFIG_PARIDE=n \
+ CONFIG_SCSI_IMM=n \
+ CONFIG_SCSI_PPA=n
+ FILES:= \
+ $(LINUX_DIR)/drivers/parport/parport_pc.ko
+ AUTOLOAD:=$(call AutoLoad,51,parport_pc)
+endef
+
+$(eval $(call KernelPackage,parport-pc))
+
+
+define KernelPackage/lp
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Parallel port line printer device support
+ DEPENDS:=+kmod-ppdev
+ KCONFIG:= \
+ CONFIG_PRINTER
+ FILES:= \
+ $(LINUX_DIR)/drivers/char/lp.ko
+ AUTOLOAD:=$(call AutoLoad,52,lp)
endef
$(eval $(call KernelPackage,lp))
define KernelPackage/mmc
SUBMENU:=$(OTHER_MENU)
TITLE:=MMC/SD Card Support
+ DEPENDS:=@!TARGET_uml
KCONFIG:= \
CONFIG_MMC \
CONFIG_MMC_BLOCK \
CONFIG_MMC_DEBUG=n \
CONFIG_MMC_UNSAFE_RESUME=n \
CONFIG_MMC_BLOCK_BOUNCE=y \
- CONFIG_MMC_SDHCI=n \
CONFIG_MMC_TIFM_SD=n \
CONFIG_MMC_WBSD=n \
CONFIG_SDIO_UART=n
FILES:= \
$(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
- $(LINUX_DIR)/drivers/mmc/card/mmc_block.ko
- AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block,1)
+ $(LINUX_DIR)/drivers/mmc/card/mmc_block.ko@lt4.10 \
+ $(LINUX_DIR)/drivers/mmc/core/mmc_block.ko@ge4.10
+ AUTOLOAD:=$(call AutoProbe,mmc_core mmc_block,1)
endef
define KernelPackage/mmc/description
$(eval $(call KernelPackage,mmc))
-define KernelPackage/oprofile
+define KernelPackage/sdhci
SUBMENU:=$(OTHER_MENU)
- TITLE:=OProfile profiling support
- KCONFIG:=CONFIG_OPROFILE
- FILES:=$(LINUX_DIR)/arch/$(LINUX_KARCH)/oprofile/oprofile.ko
- DEPENDS:=@KERNEL_PROFILING
+ TITLE:=Secure Digital Host Controller Interface support
+ DEPENDS:=+kmod-mmc
+ KCONFIG:= \
+ CONFIG_MMC_SDHCI \
+ CONFIG_MMC_SDHCI_PLTFM \
+ CONFIG_MMC_SDHCI_PCI=n
+ FILES:= \
+ $(LINUX_DIR)/drivers/mmc/host/sdhci.ko \
+ $(LINUX_DIR)/drivers/mmc/host/sdhci-pltfm.ko
+
+ AUTOLOAD:=$(call AutoProbe,sdhci-pltfm,1)
endef
-define KernelPackage/oprofile/description
- Kernel module for support for oprofile system profiling
+define KernelPackage/sdhci/description
+ Kernel support for SDHCI Hosts
endef
-$(eval $(call KernelPackage,oprofile))
+$(eval $(call KernelPackage,sdhci))
define KernelPackage/rfkill
TITLE:=RF switch subsystem support
DEPENDS:=@USE_RFKILL +kmod-input-core
KCONFIG:= \
- CONFIG_RFKILL \
+ CONFIG_RFKILL_FULL \
CONFIG_RFKILL_INPUT=y \
- CONFIG_RFKILL_LEDS=y \
- CONFIG_RFKILL_GPIO=y
+ CONFIG_RFKILL_LEDS=y
FILES:= \
$(LINUX_DIR)/net/rfkill/rfkill.ko
AUTOLOAD:=$(call AutoLoad,20,rfkill)
define KernelPackage/softdog
SUBMENU:=$(OTHER_MENU)
TITLE:=Software watchdog driver
- KCONFIG:=CONFIG_SOFT_WATCHDOG
+ KCONFIG:=CONFIG_SOFT_WATCHDOG \
+ CONFIG_SOFT_WATCHDOG_PRETIMEOUT=n
FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.ko
- AUTOLOAD:=$(call AutoLoad,50,softdog)
+ AUTOLOAD:=$(call AutoLoad,50,softdog,1)
endef
define KernelPackage/softdog/description
CONFIG_SSB_SPROM=y \
CONFIG_SSB_SILENT=y
FILES:=$(LINUX_DIR)/drivers/ssb/ssb.ko
- AUTOLOAD:=$(call AutoLoad,29,ssb)
+ AUTOLOAD:=$(call AutoLoad,18,ssb,1)
endef
define KernelPackage/ssb/description
define KernelPackage/bcma
SUBMENU:=$(OTHER_MENU)
TITLE:=BCMA support
- DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx
+ DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_bcm53xx
KCONFIG:=\
CONFIG_BCMA \
CONFIG_BCMA_POSSIBLE=y \
CONFIG_BCMA_BLOCKIO=y \
CONFIG_BCMA_HOST_PCI_POSSIBLE=y \
CONFIG_BCMA_HOST_PCI=y \
+ CONFIG_BCMA_HOST_SOC=n \
CONFIG_BCMA_DRIVER_MIPS=n \
CONFIG_BCMA_DRIVER_PCI_HOSTMODE=n \
CONFIG_BCMA_DRIVER_GMAC_CMN=n \
$(eval $(call KernelPackage,bcma))
-define KernelPackage/wdt-omap
+define KernelPackage/rtc-ds1307
SUBMENU:=$(OTHER_MENU)
- TITLE:=OMAP Watchdog timer
- DEPENDS:=@(TARGET_omap24xx||TARGET_omap35xx)
- KCONFIG:=CONFIG_OMAP_WATCHDOG
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/omap_wdt.ko
- AUTOLOAD:=$(call AutoLoad,50,omap_wdt.ko)
+ TITLE:=Dallas/Maxim DS1307 (and compatible) RTC support
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core +LINUX_4_14:kmod-regmap
+ KCONFIG:=CONFIG_RTC_DRV_DS1307 \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1307.ko
+ AUTOLOAD:=$(call AutoProbe,rtc-ds1307)
endef
-define KernelPackage/wdt-omap/description
- Kernel module for TI omap watchdog timer
+define KernelPackage/rtc-ds1307/description
+ Kernel module for Dallas/Maxim DS1307/DS1337/DS1338/DS1340/DS1388/DS3231,
+ Epson RX-8025 and various other compatible RTC chips connected via I2C.
endef
-$(eval $(call KernelPackage,wdt-omap))
+$(eval $(call KernelPackage,rtc-ds1307))
-define KernelPackage/wdt-orion
+define KernelPackage/rtc-ds1374
SUBMENU:=$(OTHER_MENU)
- TITLE:=Marvell Orion Watchdog timer
- DEPENDS:=@TARGET_orion||TARGET_kirkwood||TARGET_mvebu
- KCONFIG:=CONFIG_ORION_WATCHDOG
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/orion_wdt.ko
- AUTOLOAD:=$(call AutoLoad,50,orion_wdt)
-endef
-
-define KernelPackage/wdt-orion/description
- Kernel module for Marvell Orion, Kirkwood and Armada XP/370 watchdog timer
-endef
-
-$(eval $(call KernelPackage,wdt-orion))
-
-
-define KernelPackage/booke-wdt
- SUBMENU:=$(OTHER_MENU)
- TITLE:=PowerPC Book-E Watchdog Timer
- DEPENDS:=@(TARGET_mpc85xx||TARGET_ppc40x||TARGET_ppc44x)
- KCONFIG:=CONFIG_BOOKE_WDT
- FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/booke_wdt.ko
- AUTOLOAD:=$(call AutoLoad,50,booke_wdt)
-endef
-
-define KernelPackage/booke-wdt/description
- Kernel module for PowerPC Book-E Watchdog Timer
-endef
-
-$(eval $(call KernelPackage,booke-wdt))
-
-
-define KernelPackage/pwm
- SUBMENU:=$(OTHER_MENU)
- TITLE:=PWM generic API
- KCONFIG:=CONFIG_GENERIC_PWM
- FILES:=$(LINUX_DIR)/drivers/pwm/pwm.ko
- AUTOLOAD:=$(call AutoLoad,50,pwm)
+ TITLE:=Dallas/Maxim DS1374 RTC support
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_DS1374 \
+ CONFIG_RTC_DRV_DS1374_WDT=n \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1374.ko
+ AUTOLOAD:=$(call AutoProbe,rtc-ds1374)
endef
-define KernelPackage/pwm/description
- Kernel module that implement a generic PWM API
+define KernelPackage/rtc-ds1374/description
+ Kernel module for Dallas/Maxim DS1374.
endef
-$(eval $(call KernelPackage,pwm))
+$(eval $(call KernelPackage,rtc-ds1374))
-define KernelPackage/pwm-gpio
+define KernelPackage/rtc-ds1672
SUBMENU:=$(OTHER_MENU)
- TITLE:=PWM over GPIO
- DEPENDS:=+kmod-pwm
- KCONFIG:=CONFIG_GPIO_PWM
- FILES:=$(LINUX_DIR)/drivers/pwm/gpio-pwm.ko
- AUTOLOAD:=$(call AutoLoad,51,gpio-pwm)
+ TITLE:=Dallas/Maxim DS1672 RTC support
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_DS1672 \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1672.ko
+ AUTOLOAD:=$(call AutoProbe,rtc-ds1672)
endef
-define KernelPackage/pwm-gpio/description
- Kernel module to models a single-channel PWM device using a timer and a GPIO pin
+define KernelPackage/rtc-ds1672/description
+ Kernel module for Dallas/Maxim DS1672 RTC.
endef
-$(eval $(call KernelPackage,pwm-gpio))
+$(eval $(call KernelPackage,rtc-ds1672))
define KernelPackage/rtc-isl1208
SUBMENU:=$(OTHER_MENU)
TITLE:=Intersil ISL1208 RTC support
- $(call AddDepends/rtc)
- DEPENDS+=+kmod-i2c-core
- KCONFIG:=CONFIG_RTC_DRV_ISL1208
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_ISL1208 \
+ CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-isl1208.ko
- AUTOLOAD:=$(call AutoLoad,60,rtc-isl1208)
+ AUTOLOAD:=$(call AutoProbe,rtc-isl1208)
endef
define KernelPackage/rtc-isl1208/description
$(eval $(call KernelPackage,rtc-isl1208))
-define KernelPackage/rtc-marvell
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Marvell SoC built-in RTC support
- $(call AddDepends/rtc)
- DEPENDS+=@TARGET_kirkwood||TARGET_orion||TARGET_mvebu
- KCONFIG:=CONFIG_RTC_DRV_MV
- FILES:=$(LINUX_DIR)/drivers/rtc/rtc-mv.ko
- AUTOLOAD:=$(call AutoLoad,60,rtc-mv)
-endef
-
-define KernelPackage/rtc-marvell/description
- Kernel module for Marvell SoC built-in RTC.
-endef
-
-$(eval $(call KernelPackage,rtc-marvell))
-
define KernelPackage/rtc-pcf8563
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF8563/Epson RTC8564 RTC support
- $(call AddDepends/rtc,+kmod-i2c-core)
- KCONFIG:=CONFIG_RTC_DRV_PCF8563
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_PCF8563 \
+ CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
- AUTOLOAD:=$(call AutoLoad,60,rtc-pcf8563)
+ AUTOLOAD:=$(call AutoProbe,rtc-pcf8563)
endef
define KernelPackage/rtc-pcf8563/description
define KernelPackage/rtc-pcf2123
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF2123 RTC support
- $(call AddDepends/rtc)
- KCONFIG:=CONFIG_RTC_DRV_PCF2123
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ KCONFIG:=CONFIG_RTC_DRV_PCF2123 \
+ CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
- AUTOLOAD:=$(call AutoLoad,60,rtc-pcf2123)
+ AUTOLOAD:=$(call AutoProbe,rtc-pcf2123)
endef
define KernelPackage/rtc-pcf2123/description
define KernelPackage/rtc-pt7c4338
SUBMENU:=$(OTHER_MENU)
TITLE:=Pericom PT7C4338 RTC support
- $(call AddDepends/rtc,+kmod-i2c-core)
- KCONFIG:=CONFIG_RTC_DRV_PT7C4338
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_PT7C4338 \
+ CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
- AUTOLOAD:=$(call AutoLoad,60,rtc-pt7c4338)
+ AUTOLOAD:=$(call AutoProbe,rtc-pt7c4338)
endef
define KernelPackage/rtc-pt7c4338/description
$(eval $(call KernelPackage,rtc-pt7c4338))
+define KernelPackage/rtc-rs5c372a
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_RS5C372 \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-rs5c372.ko
+ AUTOLOAD:=$(call AutoLoad,50,rtc-rs5c372,1)
+endef
+
+define KernelPackage/rtc-rs5c372a/description
+ Kernel module for Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A RTC on chip module
+endef
+
+$(eval $(call KernelPackage,rtc-rs5c372a))
+
define KernelPackage/mtdtests
SUBMENU:=$(OTHER_MENU)
TITLE:=MTD subsystem tests
KCONFIG:=CONFIG_MTD_TESTS
- DEPENDS:=+kmod-nand
FILES:=\
$(LINUX_DIR)/drivers/mtd/tests/mtd_nandecctest.ko \
$(LINUX_DIR)/drivers/mtd/tests/mtd_oobtest.ko \
$(eval $(call KernelPackage,mtdtests))
-define KernelPackage/nand
+define KernelPackage/mtdoops
SUBMENU:=$(OTHER_MENU)
- TITLE:=NAND flash support
- KCONFIG:=CONFIG_MTD_NAND \
- CONFIG_MTD_NAND_IDS \
- CONFIG_MTD_NAND_ECC
- FILES:= \
- $(LINUX_DIR)/drivers/mtd/nand/nand_ids.ko \
- $(LINUX_DIR)/drivers/mtd/nand/nand_ecc.ko \
- $(LINUX_DIR)/drivers/mtd/nand/nand.ko
- AUTOLOAD:=$(call AutoLoad,20,nand_ids nand_ecc nand)
+ TITLE:=Log panic/oops to an MTD buffer
+ KCONFIG:=CONFIG_MTD_OOPS
+ FILES:=$(LINUX_DIR)/drivers/mtd/mtdoops.ko
endef
-define KernelPackage/nand/description
- Kernel module for NAND support
+define KernelPackage/mtdoops/description
+ Kernel modules for Log panic/oops to an MTD buffer
endef
-$(eval $(call KernelPackage,nand))
+$(eval $(call KernelPackage,mtdoops))
-define KernelPackage/nandsim
+define KernelPackage/mtdram
SUBMENU:=$(OTHER_MENU)
- TITLE:=NAND simulator
- DEPENDS:=+kmod-nand
- KCONFIG:=CONFIG_MTD_NAND_NANDSIM
- FILES:=$(LINUX_DIR)/drivers/mtd/nand/nandsim.ko
+ TITLE:=Test MTD driver using RAM
+ KCONFIG:=CONFIG_MTD_MTDRAM \
+ CONFIG_MTDRAM_TOTAL_SIZE=4096 \
+ CONFIG_MTDRAM_ERASE_SIZE=128
+ FILES:=$(LINUX_DIR)/drivers/mtd/devices/mtdram.ko
endef
-define KernelPackage/nandsim/description
- Kernel module for NAND flash simulation.
+define KernelPackage/mtdram/description
+ Test MTD driver using RAM
endef
-$(eval $(call KernelPackage,nandsim))
+$(eval $(call KernelPackage,mtdram))
+
define KernelPackage/serial-8250
SUBMENU:=$(OTHER_MENU)
TITLE:=8250 UARTs
KCONFIG:= CONFIG_SERIAL_8250 \
+ CONFIG_SERIAL_8250_PCI \
CONFIG_SERIAL_8250_NR_UARTS=16 \
- CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
- CONFIG_SERIAL_8250_EXTENDED=y \
- CONFIG_SERIAL_8250_MANY_PORTS=y \
+ CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
+ CONFIG_SERIAL_8250_EXTENDED=y \
+ CONFIG_SERIAL_8250_MANY_PORTS=y \
CONFIG_SERIAL_8250_SHARE_IRQ=y \
CONFIG_SERIAL_8250_DETECT_IRQ=n \
CONFIG_SERIAL_8250_RSA=n
- FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250$(if $(call kernel_patchver_ge,3.7),$(if $(call kernel_patchver_le,3.8),_core)).ko
+ FILES:= \
+ $(LINUX_DIR)/drivers/tty/serial/8250/8250.ko \
+ $(LINUX_DIR)/drivers/tty/serial/8250/8250_base.ko@ge4.4 \
+ $(if $(CONFIG_PCI),$(LINUX_DIR)/drivers/tty/serial/8250/8250_pci.ko@ge4.4)
+ AUTOLOAD:=$(call AutoProbe,8250 8250_base 8250_pci)
endef
define KernelPackage/serial-8250/description
$(eval $(call KernelPackage,serial-8250))
+define KernelPackage/serial-8250-exar
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Exar 8250 UARTs
+ KCONFIG:= CONFIG_SERIAL_8250_EXAR
+ FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250_exar.ko
+ AUTOLOAD:=$(call AutoProbe,8250 8250_base 8250_exar)
+ DEPENDS:=+kmod-serial-8250
+endef
+
+define KernelPackage/serial-8250-exar/description
+ Kernel module for Exar serial ports
+endef
+
+$(eval $(call KernelPackage,serial-8250-exar))
+
+
define KernelPackage/regmap
SUBMENU:=$(OTHER_MENU)
TITLE:=Generic register map support
DEPENDS:=+kmod-lib-lzo +kmod-i2c-core
KCONFIG:=CONFIG_REGMAP \
+ CONFIG_REGMAP_MMIO \
CONFIG_REGMAP_SPI \
CONFIG_REGMAP_I2C \
CONFIG_SPI=y
FILES:= \
- $(LINUX_DIR)/drivers/base/regmap/regmap-core.ko \
$(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko \
- $(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko
- AUTOLOAD:=$(call AutoLoad,21,regmap-core regmap-i2c regmap-spi)
+ $(LINUX_DIR)/drivers/base/regmap/regmap-mmio.ko \
+ $(if $(CONFIG_SPI),$(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko)
+ AUTOLOAD:=$(call AutoLoad,21,regmap-core regmap-i2c regmap-mmio regmap-spi)
+ ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE)),"")
+ ifeq ($(strip $(CONFIG_KERNEL_GIT_CLONE_URI)),"")
+ FILES += $(LINUX_DIR)/drivers/base/regmap/regmap-core.ko
+ endif
+ endif
endef
define KernelPackage/regmap/description
define KernelPackage/zram
SUBMENU:=$(OTHER_MENU)
TITLE:=ZRAM
- DEPENDS:=@!LINUX_3_3 +kmod-lib-lzo
+ DEPENDS:=+kmod-lib-lzo +kmod-lib-lz4
KCONFIG:= \
CONFIG_ZSMALLOC \
CONFIG_ZRAM \
- CONFIG_ZRAM_DEBUG=n
+ CONFIG_ZRAM_DEBUG=n \
+ CONFIG_PGTABLE_MAPPING=n \
+ CONFIG_ZRAM_WRITEBACK=n \
+ CONFIG_ZSMALLOC_STAT=n \
+ CONFIG_ZRAM_LZ4_COMPRESS=y
FILES:= \
- $(LINUX_DIR)/drivers/staging/zsmalloc/zsmalloc.ko \
- $(LINUX_DIR)/drivers/staging/zram/zram.ko
+ $(LINUX_DIR)/mm/zsmalloc.ko \
+ $(LINUX_DIR)/drivers/block/zram/zram.ko
AUTOLOAD:=$(call AutoLoad,20,zsmalloc zram)
endef
$(eval $(call KernelPackage,zram))
-define KernelPackage/mvsdio
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Marvell SDIO support
- DEPENDS:=@TARGET_orion||TARGET_kirkwood||TARGET_mvebu +kmod-mmc
- KCONFIG:=CONFIG_MMC_MVSDIO
- FILES:=$(LINUX_DIR)/drivers/mmc/host/mvsdio.ko
- AUTOLOAD:=$(call AutoLoad,91,mvsdio)
-endef
-
-define KernelPacakge/mvsdio/description
- Kernel support for the Marvell SDIO controller
-endef
-
-$(eval $(call KernelPackage,mvsdio))
-
-
define KernelPackage/pps
SUBMENU:=$(OTHER_MENU)
TITLE:=PPS support
AUTOLOAD:=$(call AutoLoad,17,pps_core,1)
endef
-define KernelPacakge/pps/description
+define KernelPackage/pps/description
PPS (Pulse Per Second) is a special pulse provided by some GPS
antennae. Userland can use it to get a high-precision time
reference.
$(eval $(call KernelPackage,pps))
+define KernelPackage/pps-gpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PPS client using GPIO
+ DEPENDS:=+kmod-pps
+ KCONFIG:=CONFIG_PPS_CLIENT_GPIO
+ FILES:=$(LINUX_DIR)/drivers/pps/clients/pps-gpio.ko
+ AUTOLOAD:=$(call AutoLoad,18,pps-gpio,1)
+endef
+
+define KernelPackage/pps-gpio/description
+ Support for a PPS source using GPIO. To be useful you must
+ also register a platform device specifying the GPIO pin and
+ other options, usually in your board setup.
+endef
+
+$(eval $(call KernelPackage,pps-gpio))
+
+
+define KernelPackage/pps-ldisc
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PPS line discipline
+ DEPENDS:=+kmod-pps
+ KCONFIG:=CONFIG_PPS_CLIENT_LDISC
+ FILES:=$(LINUX_DIR)/drivers/pps/clients/pps-ldisc.ko
+ AUTOLOAD:=$(call AutoLoad,18,pps-ldisc,1)
+endef
+
+define KernelPackage/pps-ldisc/description
+ Support for a PPS source connected with the CD (Carrier
+ Detect) pin of your serial port.
+endef
+
+$(eval $(call KernelPackage,pps-ldisc))
+
+
define KernelPackage/ptp
SUBMENU:=$(OTHER_MENU)
TITLE:=PTP clock support
DEPENDS:=+kmod-pps
- KCONFIG:=CONFIG_PTP_1588_CLOCK
+ KCONFIG:= \
+ CONFIG_PTP_1588_CLOCK \
+ CONFIG_NET_PTP_CLASSIFY=y
FILES:=$(LINUX_DIR)/drivers/ptp/ptp.ko
AUTOLOAD:=$(call AutoLoad,18,ptp,1)
endef
-define KernelPacakge/ptp/description
+define KernelPackage/ptp/description
The IEEE 1588 standard defines a method to precisely
synchronize distributed clocks over Ethernet networks.
endef
define KernelPackage/ptp-gianfar
SUBMENU:=$(OTHER_MENU)
TITLE:=Freescale Gianfar PTP support
- DEPENDS:=@TARGET_mpc85xx +kmod-gianfar +kmod-ptp
+ DEPENDS:=@TARGET_mpc85xx +kmod-ptp
KCONFIG:=CONFIG_PTP_1588_CLOCK_GIANFAR
FILES:=$(LINUX_DIR)/drivers/net/ethernet/freescale/gianfar_ptp.ko
- AUTOLOAD:=$(call AutoLoad,51,gianfar_ptp)
+ AUTOLOAD:=$(call AutoProbe,gianfar_ptp)
endef
-define KernelPacakge/ptp-gianfar/description
+define KernelPackage/ptp-gianfar/description
Kernel module for IEEE 1588 support for Freescale
Gianfar Ethernet drivers
endef
TITLE:=Hardware Random Number Generator Core support
KCONFIG:=CONFIG_HW_RANDOM
FILES:=$(LINUX_DIR)/drivers/char/hw_random/rng-core.ko
- AUTOLOAD:=$(call AutoLoad,10,rng-core)
endef
define KernelPackage/random-core/description
endef
$(eval $(call KernelPackage,random-core))
+
+define KernelPackage/random-omap
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Hardware Random Number Generator OMAP support
+ KCONFIG:=CONFIG_HW_RANDOM_OMAP
+ FILES:=$(LINUX_DIR)/drivers/char/hw_random/omap-rng.ko
+ DEPENDS:=@TARGET_omap24xx +kmod-random-core
+ AUTOLOAD:=$(call AutoProbe,random-omap)
+endef
+
+define KernelPackage/random-omap/description
+ Kernel module for the OMAP Random Number Generator
+ found on OMAP16xx, OMAP2/3/4/5 and AM33xx/AM43xx multimedia processors.
+endef
+
+$(eval $(call KernelPackage,random-omap))
+
+define KernelPackage/random-tpm
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Hardware Random Number Generator TPM support
+ KCONFIG:=CONFIG_HW_RANDOM_TPM
+ FILES:=$(LINUX_DIR)/drivers/char/hw_random/tpm-rng.ko
+ DEPENDS:= +kmod-random-core +kmod-tpm
+ AUTOLOAD:=$(call AutoProbe,tpm-rng)
+endef
+
+define KernelPackage/random-tpm/description
+ Kernel module for the Random Number Generator
+ in the Trusted Platform Module.
+endef
+
+$(eval $(call KernelPackage,random-tpm))
+
+define KernelPackage/thermal
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Generic Thermal sysfs driver
+ DEPENDS:=+kmod-hwmon-core
+ HIDDEN:=1
+ KCONFIG:= \
+ CONFIG_THERMAL \
+ CONFIG_THERMAL_OF=y \
+ CONFIG_CPU_THERMAL=y \
+ CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y \
+ CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=n \
+ CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=n \
+ CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 \
+ CONFIG_THERMAL_GOV_FAIR_SHARE=n \
+ CONFIG_THERMAL_GOV_STEP_WISE=y \
+ CONFIG_THERMAL_GOV_USER_SPACE=n \
+ CONFIG_THERMAL_HWMON=y \
+ CONFIG_THERMAL_EMULATION=n
+ FILES:=$(LINUX_DIR)/drivers/thermal/thermal_sys.ko
+ AUTOLOAD:=$(call AutoProbe,thermal_sys)
+endef
+
+define KernelPackage/thermal/description
+ Generic Thermal Sysfs driver offers a generic mechanism for thermal
+ management. Usually it's made up of one or more thermal zone and cooling
+ device.
+endef
+
+$(eval $(call KernelPackage,thermal))
+
+
+define KernelPackage/gpio-beeper
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=GPIO beeper support
+ DEPENDS:=+kmod-input-core
+ KCONFIG:= \
+ CONFIG_INPUT_MISC=y \
+ CONFIG_INPUT_GPIO_BEEPER
+ FILES:= \
+ $(LINUX_DIR)/drivers/input/misc/gpio-beeper.ko
+ AUTOLOAD:=$(call AutoLoad,50,gpio-beeper)
+endef
+
+define KernelPackage/gpio-beeper/description
+ This enables playing beeps through an GPIO-connected buzzer
+endef
+
+$(eval $(call KernelPackage,gpio-beeper))
+
+
+define KernelPackage/echo
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Line Echo Canceller
+ KCONFIG:=CONFIG_ECHO
+ FILES:=$(LINUX_DIR)/drivers/misc/echo/echo.ko
+ AUTOLOAD:=$(call AutoLoad,50,echo)
+endef
+
+define KernelPackage/echo/description
+ This driver provides line echo cancelling support for mISDN and
+ DAHDI drivers
+endef
+
+$(eval $(call KernelPackage,echo))
+
+
+define KernelPackage/bmp085
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=BMP085/BMP18x pressure sensor
+ DEPENDS:= +kmod-regmap @!LINUX_3_18
+ KCONFIG:= CONFIG_BMP085
+ FILES:= $(LINUX_DIR)/drivers/misc/bmp085.ko
+endef
+
+define KernelPackage/bmp085/description
+ This driver adds support for Bosch Sensortec's digital pressure
+ sensors BMP085 and BMP18x.
+endef
+
+$(eval $(call KernelPackage,bmp085))
+
+
+define KernelPackage/bmp085-i2c
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=BMP085/BMP18x pressure sensor I2C
+ DEPENDS:= +kmod-bmp085
+ KCONFIG:= CONFIG_BMP085_I2C
+ FILES:= $(LINUX_DIR)/drivers/misc/bmp085-i2c.ko
+ AUTOLOAD:=$(call AutoProbe,bmp085-i2c)
+endef
+define KernelPackage/bmp085-i2c/description
+ This driver adds support for Bosch Sensortec's digital pressure
+ sensor connected via I2C.
+endef
+
+$(eval $(call KernelPackage,bmp085-i2c))
+
+
+define KernelPackage/bmp085-spi
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=BMP085/BMP18x pressure sensor SPI
+ DEPENDS:= +kmod-bmp085
+ KCONFIG:= CONFIG_BMP085_SPI
+ FILES:= $(LINUX_DIR)/drivers/misc/bmp085-spi.ko
+ AUTOLOAD:=$(call AutoProbe,bmp085-spi)
+endef
+define KernelPackage/bmp085-spi/description
+ This driver adds support for Bosch Sensortec's digital pressure
+ sensor connected via SPI.
+endef
+
+$(eval $(call KernelPackage,bmp085-spi))
+
+define KernelPackage/tpm
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=TPM Hardware Support
+ KCONFIG:= CONFIG_TCG_TPM
+ FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm.ko
+ AUTOLOAD:=$(call AutoLoad,10,tpm,1)
+endef
+
+define KernelPackage/tpm/description
+ This enables TPM Hardware Support.
+endef
+
+$(eval $(call KernelPackage,tpm))
+
+define KernelPackage/tpm-tis
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=TPM TIS 1.2 Interface / TPM 2.0 FIFO Interface
+ DEPENDS:= @TARGET_x86 +kmod-tpm
+ KCONFIG:= CONFIG_TCG_TIS
+ FILES:= \
+ $(LINUX_DIR)/drivers/char/tpm/tpm_tis.ko \
+ $(LINUX_DIR)/drivers/char/tpm/tpm_tis_core.ko
+ AUTOLOAD:=$(call AutoLoad,20,tpm_tis,1)
+endef
+
+define KernelPackage/tpm-tis/description
+ If you have a TPM security chip that is compliant with the
+ TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO
+ specification (TPM2.0) say Yes and it will be accessible from
+ within Linux.
+endef
+
+$(eval $(call KernelPackage,tpm-tis))
+
+define KernelPackage/tpm-i2c-atmel
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=TPM I2C Atmel Support
+ DEPENDS:= +kmod-tpm +kmod-i2c-core
+ KCONFIG:= CONFIG_TCG_TIS_I2C_ATMEL
+ FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm_i2c_atmel.ko
+ AUTOLOAD:=$(call AutoLoad,40,tpm_i2c_atmel,1)
+endef
+
+define KernelPackage/tpm-i2c-atmel/description
+ This enables the TPM Interface Specification 1.2 Interface (I2C - Atmel)
+endef
+
+$(eval $(call KernelPackage,tpm-i2c-atmel))
+
+define KernelPackage/tpm-i2c-infineon
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:= TPM I2C Infineon driver
+ DEPENDS:= +kmod-tpm +kmod-i2c-core
+ KCONFIG:= CONFIG_TCG_TIS_I2C_INFINEON
+ FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm_i2c_infineon.ko
+ AUTOLOAD:= $(call AutoLoad,40,tpm_i2c_infineon,1)
+endef
+
+define KernelPackage/tpm-i2c-infineon/description
+ This enables the TPM Interface Specification 1.2 Interface (I2C - Infineon)
+endef
+
+$(eval $(call KernelPackage,tpm-i2c-infineon))
+
+
+define KernelPackage/w83627hf-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Winbond 83627HF Watchdog Timer
+ KCONFIG:=CONFIG_W83627HF_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/w83627hf_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,w83627hf-wdt,1)
+endef
+
+define KernelPackage/w83627hf-wdt/description
+ Kernel module for Winbond 83627HF Watchdog Timer
+endef
+
+$(eval $(call KernelPackage,w83627hf-wdt))
+
+
+define KernelPackage/itco-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Intel iTCO Watchdog Timer
+ KCONFIG:=CONFIG_ITCO_WDT \
+ CONFIG_ITCO_VENDOR_SUPPORT=y
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/iTCO_wdt.ko \
+ $(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/iTCO_vendor_support.ko
+ AUTOLOAD:=$(call AutoLoad,50,iTCO_vendor_support iTCO_wdt,1)
+endef
+
+define KernelPackage/itco-wdt/description
+ Kernel module for Intel iTCO Watchdog Timer
+endef
+
+$(eval $(call KernelPackage,itco-wdt))
+
+
+define KernelPackage/it87-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=ITE IT87 Watchdog Timer
+ KCONFIG:=CONFIG_IT87_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/it87_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,it87-wdt,1)
+ MODPARAMS.it87-wdt:= \
+ nogameport=1 \
+ nocir=1
+endef
+
+define KernelPackage/it87-wdt/description
+ Kernel module for ITE IT87 Watchdog Timer
+endef
+
+$(eval $(call KernelPackage,it87-wdt))