define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +kmod-crypto-ecb +kmod-lib-crc16 +kmod-hid +kmod-crypto-cmac +kmod-regmap-core +!LINUX_4_9:kmod-crypto-ecdh
+ DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +kmod-crypto-ecb +kmod-lib-crc16 +kmod-hid +kmod-crypto-cmac +kmod-regmap-core +kmod-crypto-ecdh
KCONFIG:= \
CONFIG_BT \
CONFIG_BT_BREDR=y \
$(LINUX_DIR)/net/bluetooth/bnep/bnep.ko \
$(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
$(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
- $(LINUX_DIR)/drivers/bluetooth/btusb.ko
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,4.1.0)),1)
- FILES+= \
+ $(LINUX_DIR)/drivers/bluetooth/btusb.ko \
$(LINUX_DIR)/drivers/bluetooth/btintel.ko
-endif
AUTOLOAD:=$(call AutoProbe,bluetooth rfcomm bnep hidp hci_uart btusb)
endef
$(eval $(call KernelPackage,ath3k))
-define KernelPackage/bluetooth_6lowpan
+define KernelPackage/bluetooth-6lowpan
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth 6LoWPAN support
DEPENDS:=+kmod-6lowpan +kmod-bluetooth
AUTOLOAD:=$(call AutoProbe,bluetooth_6lowpan)
endef
-define KernelPackage/bluetooth_6lowpan/description
+define KernelPackage/bluetooth-6lowpan/description
Kernel support for 6LoWPAN over Bluetooth Low Energy devices
endef
-$(eval $(call KernelPackage,bluetooth_6lowpan))
+$(eval $(call KernelPackage,bluetooth-6lowpan))
define KernelPackage/btmrvl
$(eval $(call KernelPackage,dma-buf))
-define KernelPackage/nvmem
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Non Volatile Memory support
- KCONFIG:=CONFIG_NVMEM
- HIDDEN:=1
- FILES:=$(LINUX_DIR)/drivers/nvmem/nvmem_core.ko@ge4.9
-endef
-
-define KernelPackage/nvmem/description
- Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES, etc.
-endef
-
-$(eval $(call KernelPackage,nvmem))
-
define KernelPackage/eeprom-93cx6
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM 93CX6 support
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT24 support
KCONFIG:=CONFIG_EEPROM_AT24
- DEPENDS:=+kmod-i2c-core +kmod-nvmem +LINUX_4_19:kmod-regmap-i2c
+ DEPENDS:=+kmod-i2c-core +kmod-regmap-i2c
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
AUTOLOAD:=$(call AutoProbe,at24)
endef
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT25 support
KCONFIG:=CONFIG_EEPROM_AT25
- DEPENDS:=+kmod-nvmem
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
AUTOLOAD:=$(call AutoProbe,at25)
endef
$(eval $(call KernelPackage,gpio-dev))
+define KernelPackage/gpio-f7188x
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Fintek F718xx/F818xx GPIO Support
+ DEPENDS:=@GPIO_SUPPORT @TARGET_x86
+ KCONFIG:=CONFIG_GPIO_F7188X
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-f7188x.ko
+ AUTOLOAD:=$(call AutoProbe,gpio-f7188x)
+endef
+
+define KernelPackage/gpio-f7188x/description
+ Kernel module for the GPIOs found on many Fintek Super-IO chips.
+endef
+
+$(eval $(call KernelPackage,gpio-f7188x))
+
+
define KernelPackage/gpio-mcp23s08
SUBMENU:=$(OTHER_MENU)
TITLE:=Microchip MCP23xxx I/O expander
- DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +!LINUX_4_9:kmod-regmap-i2c
+ DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +kmod-regmap-i2c
KCONFIG:= \
CONFIG_GPIO_MCP23S08 \
CONFIG_PINCTRL_MCP23S08
FILES:= \
- $(LINUX_DIR)/drivers/gpio/gpio-mcp23s08.ko@lt4.13 \
- $(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08.ko@ge4.13
- AUTOLOAD:=$(call AutoLoad,40,gpio-mcp23s08@lt4.13 pinctrl-mcp23s08@ge4.13)
+ $(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08.ko
+ AUTOLOAD:=$(call AutoLoad,40,pinctrl-mcp23s08)
endef
define KernelPackage/gpio-mcp23s08/description
define KernelPackage/gpio-pca953x
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core
+ DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +kmod-regmap-i2c
TITLE:=PCA95xx, TCA64xx, and MAX7310 I/O ports
KCONFIG:=CONFIG_GPIO_PCA953X
FILES:=$(LINUX_DIR)/drivers/gpio/gpio-pca953x.ko
$(eval $(call KernelPackage,gpio-pcf857x))
+define KernelPackage/gpio-it87
+ SUBMENU:=$(OTHER_MENU)
+ DEPENDS:=@GPIO_SUPPORT @TARGET_x86
+ TITLE:=GPIO support for IT87xx Super I/O chips
+ KCONFIG:=CONFIG_GPIO_IT87
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-it87.ko
+ AUTOLOAD:=$(call AutoLoad,25,gpio-it87,1)
+endef
+
+define KernelPackage/gpio-it87/description
+ This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and
+ supports the IT8761E, IT8613, IT8620E, and IT8628E Super I/O chips as
+ well.
+endef
+
+$(eval $(call KernelPackage,gpio-it87))
+
+
+define KernelPackage/gpio-amd-fch
+ SUBMENU:=$(OTHER_MENU)
+ DEPENDS:=@GPIO_SUPPORT @TARGET_x86
+ TITLE:=GPIO support for AMD Fusion Controller Hub (G-series SOCs)
+ KCONFIG:=CONFIG_GPIO_AMD_FCH
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-amd-fch.ko
+ AUTOLOAD:=$(call AutoLoad,25,gpio-amd-fch,1)
+endef
+
+define KernelPackage/gpio-amd-fch/description
+ This option enables driver for GPIO on AMDs Fusion Controller Hub,
+ as found on G-series SOCs (eg. GX-412TC)
+endef
+
+$(eval $(call KernelPackage,gpio-amd-fch))
+
+
define KernelPackage/ppdev
SUBMENU:=$(OTHER_MENU)
TITLE:=Parallel port support
CONFIG_SDIO_UART=n
FILES:= \
$(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
- $(LINUX_DIR)/drivers/mmc/card/mmc_block.ko@lt4.10 \
- $(LINUX_DIR)/drivers/mmc/core/mmc_block.ko@ge4.10
+ $(LINUX_DIR)/drivers/mmc/core/mmc_block.ko
AUTOLOAD:=$(call AutoProbe,mmc_core mmc_block,1)
endef
$(eval $(call KernelPackage,mmc))
+define KernelPackage/mvsdio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Marvell MMC/SD/SDIO host driver
+ DEPENDS:=+kmod-mmc @TARGET_kirkwood
+ KCONFIG:= CONFIG_MMC_MVSDIO
+ FILES:= \
+ $(LINUX_DIR)/drivers/mmc/host/mvsdio.ko
+ AUTOLOAD:=$(call AutoProbe,mvsdio,1)
+endef
+
+define KernelPackage/mvsdio/description
+ Kernel support for the Marvell SDIO host driver.
+endef
+
+$(eval $(call KernelPackage,mvsdio))
+
+
define KernelPackage/sdhci
SUBMENU:=$(OTHER_MENU)
TITLE:=Secure Digital Host Controller Interface support
define KernelPackage/ssb
SUBMENU:=$(OTHER_MENU)
TITLE:=Silicon Sonics Backplane glue code
- DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
+ DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_bcm63xx
KCONFIG:=\
CONFIG_SSB \
CONFIG_SSB_B43_PCI_BRIDGE=y \
define KernelPackage/bcma
SUBMENU:=$(OTHER_MENU)
TITLE:=BCMA support
- DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_bcm53xx
+ DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_bcm53xx
KCONFIG:=\
CONFIG_BCMA \
CONFIG_BCMA_POSSIBLE=y \
SUBMENU:=$(OTHER_MENU)
TITLE:=Dallas/Maxim DS1307 (and compatible) RTC support
DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
- DEPENDS:=+kmod-i2c-core +!LINUX_4_9:kmod-regmap-i2c +!LINUX_4_9:kmod-hwmon-core
+ DEPENDS:=+kmod-i2c-core +kmod-regmap-i2c +kmod-hwmon-core
KCONFIG:=CONFIG_RTC_DRV_DS1307 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1307.ko
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF2123 RTC support
DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-regmap-spi
KCONFIG:=CONFIG_RTC_DRV_PCF2123 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
$(eval $(call KernelPackage,rtc-rx8025))
+define KernelPackage/rtc-s35390a
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Seico S-35390A
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_S35390A \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-s35390a.ko
+ AUTOLOAD:=$(call AutoLoad,50,rtc-s35390a,1)
+endef
+
+define KernelPackage/rtc-s35390a/description
+ Kernel module for Seiko Instruments S-35390A I2C RTC chip
+endef
+
+$(eval $(call KernelPackage,rtc-s35390a))
+
define KernelPackage/mtdtests
SUBMENU:=$(OTHER_MENU)
CONFIG_SERIAL_8250_RSA=n
FILES:= \
$(LINUX_DIR)/drivers/tty/serial/8250/8250.ko \
- $(LINUX_DIR)/drivers/tty/serial/8250/8250_base.ko@ge4.4 \
- $(if $(CONFIG_PCI),$(LINUX_DIR)/drivers/tty/serial/8250/8250_pci.ko@ge4.4)
+ $(LINUX_DIR)/drivers/tty/serial/8250/8250_base.ko \
+ $(if $(CONFIG_PCI),$(LINUX_DIR)/drivers/tty/serial/8250/8250_pci.ko) \
+ $(if $(CONFIG_GPIOLIB),$(LINUX_DIR)/drivers/tty/serial/serial_mctrl_gpio.ko)
AUTOLOAD:=$(call AutoProbe,8250 8250_base 8250_pci)
endef
define KernelPackage/zram
SUBMENU:=$(OTHER_MENU)
TITLE:=ZRAM
- DEPENDS:=+kmod-lib-lzo +kmod-lib-lz4
+ DEPENDS:=+kmod-lib-lzo
KCONFIG:= \
CONFIG_ZSMALLOC \
CONFIG_ZRAM \
CONFIG_ZRAM_DEBUG=n \
CONFIG_PGTABLE_MAPPING=n \
CONFIG_ZRAM_WRITEBACK=n \
- CONFIG_ZSMALLOC_STAT=n \
- CONFIG_ZRAM_LZ4_COMPRESS=y
+ CONFIG_ZSMALLOC_STAT=n
FILES:= \
$(LINUX_DIR)/mm/zsmalloc.ko \
$(LINUX_DIR)/drivers/block/zram/zram.ko
$(eval $(call KernelPackage,ptp))
-define KernelPackage/ptp-gianfar
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Freescale Gianfar PTP support
- DEPENDS:=@TARGET_mpc85xx +kmod-ptp @!LINUX_4_19
- KCONFIG:=CONFIG_PTP_1588_CLOCK_GIANFAR
- FILES:=$(LINUX_DIR)/drivers/net/ethernet/freescale/gianfar_ptp.ko
- AUTOLOAD:=$(call AutoProbe,gianfar_ptp)
-endef
-
-define KernelPackage/ptp-gianfar/description
- Kernel module for IEEE 1588 support for Freescale
- Gianfar Ethernet drivers
-endef
-
-$(eval $(call KernelPackage,ptp-gianfar))
-
define KernelPackage/ptp-qoriq
SUBMENU:=$(OTHER_MENU)
TITLE:=Freescale QorIQ PTP support
- DEPENDS:=@TARGET_mpc85xx +kmod-ptp @LINUX_4_19
+ DEPENDS:=@TARGET_mpc85xx +kmod-ptp
KCONFIG:=CONFIG_PTP_1588_CLOCK_QORIQ
- FILES:=$(LINUX_DIR)/drivers/ptp/ptp_qoriq.o
- AUTOLOAD:=$(call AutoProbe,ptp_qoriq)
+ FILES:=$(LINUX_DIR)/drivers/ptp/ptp-qoriq.ko
+ AUTOLOAD:=$(call AutoProbe,ptp-qoriq)
endef
$(eval $(call KernelPackage,random-core))
-define KernelPackage/random-tpm
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Hardware Random Number Generator TPM support
- KCONFIG:=CONFIG_HW_RANDOM_TPM
- FILES:=$(LINUX_DIR)/drivers/char/hw_random/tpm-rng.ko
- DEPENDS:= +kmod-random-core +kmod-tpm @!LINUX_4_19
- AUTOLOAD:=$(call AutoProbe,tpm-rng)
-endef
-
-define KernelPackage/random-tpm/description
- Kernel module for the Random Number Generator
- in the Trusted Platform Module.
-endef
-
-$(eval $(call KernelPackage,random-tpm))
-
define KernelPackage/thermal
SUBMENU:=$(OTHER_MENU)
TITLE:=Generic Thermal sysfs driver
$(eval $(call KernelPackage,echo))
-define KernelPackage/bmp085
+define KernelPackage/keys-encrypted
SUBMENU:=$(OTHER_MENU)
- TITLE:=BMP085/BMP18x pressure sensor
- DEPENDS:= +kmod-regmap-core
- KCONFIG:= CONFIG_BMP085
- FILES:= $(LINUX_DIR)/drivers/misc/bmp085.ko
+ TITLE:=encrypted keys on kernel keyring
+ DEPENDS:=@KERNEL_KEYS +kmod-crypto-cbc +kmod-crypto-hmac +kmod-crypto-rng \
+ +kmod-crypto-sha256 +kmod-keys-trusted
+ KCONFIG:=CONFIG_ENCRYPTED_KEYS
+ FILES:=$(LINUX_DIR)/security/keys/encrypted-keys/encrypted-keys.ko
+ AUTOLOAD:=$(call AutoLoad,01,encrypted-keys,1)
endef
-define KernelPackage/bmp085/description
- This driver adds support for Bosch Sensortec's digital pressure
- sensors BMP085 and BMP18x.
+define KernelPackage/keys-encrypted/description
+ This module provides support for create/encrypting/decrypting keys
+ in the kernel. Encrypted keys are kernel generated random numbers,
+ which are encrypted/decrypted with a 'master' symmetric key. The
+ 'master' key can be either a trusted-key or user-key type.
+ Userspace only ever sees/stores encrypted blobs.
endef
-$(eval $(call KernelPackage,bmp085))
+$(eval $(call KernelPackage,keys-encrypted))
-define KernelPackage/bmp085-i2c
+define KernelPackage/keys-trusted
SUBMENU:=$(OTHER_MENU)
- TITLE:=BMP085/BMP18x pressure sensor I2C
- DEPENDS:= +kmod-bmp085
- KCONFIG:= CONFIG_BMP085_I2C
- FILES:= $(LINUX_DIR)/drivers/misc/bmp085-i2c.ko
- AUTOLOAD:=$(call AutoProbe,bmp085-i2c)
+ TITLE:=TPM trusted keys on kernel keyring
+ DEPENDS:=@KERNEL_KEYS +kmod-crypto-hash +kmod-crypto-hmac +kmod-crypto-sha1 +kmod-tpm
+ KCONFIG:=CONFIG_TRUSTED_KEYS
+ FILES:=$(LINUX_DIR)/security/keys/trusted.ko
+ AUTOLOAD:=$(call AutoLoad,01,trusted-keys,1)
endef
-define KernelPackage/bmp085-i2c/description
- This driver adds support for Bosch Sensortec's digital pressure
- sensor connected via I2C.
-endef
-
-$(eval $(call KernelPackage,bmp085-i2c))
-
-define KernelPackage/bmp085-spi
- SUBMENU:=$(OTHER_MENU)
- TITLE:=BMP085/BMP18x pressure sensor SPI
- DEPENDS:= +kmod-bmp085
- KCONFIG:= CONFIG_BMP085_SPI
- FILES:= $(LINUX_DIR)/drivers/misc/bmp085-spi.ko
- AUTOLOAD:=$(call AutoProbe,bmp085-spi)
-endef
-define KernelPackage/bmp085-spi/description
- This driver adds support for Bosch Sensortec's digital pressure
- sensor connected via SPI.
+define KernelPackage/keys-trusted/description
+ This module provides support for creating, sealing, and unsealing
+ keys in the kernel. Trusted keys are random number symmetric keys,
+ generated and RSA-sealed by the TPM. The TPM only unseals the keys,
+ if the boot PCRs and other criteria match. Userspace will only ever
+ see encrypted blobs.
endef
-$(eval $(call KernelPackage,bmp085-spi))
+$(eval $(call KernelPackage,keys-trusted))
+
define KernelPackage/tpm
SUBMENU:=$(OTHER_MENU)
TITLE:=TPM Hardware Support
- DEPENDS:= +!LINUX_4_14:kmod-random-core
+ DEPENDS:= +kmod-random-core
KCONFIG:= CONFIG_TCG_TPM
FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm.ko
AUTOLOAD:=$(call AutoLoad,10,tpm,1)
endef
$(eval $(call KernelPackage,it87-wdt))
+
+
+define KernelPackage/f71808e-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Fintek F718xx/F818xx Watchdog Timer
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_F71808E_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/f71808e_wdt.ko
+ AUTOLOAD:=$(call AutoProbe,f71808e-wdt,1)
+endef
+
+define KernelPackage/f71808e-wdt/description
+ Kernel module for the watchdog timer found on many Fintek Super-IO chips.
+endef
+
+$(eval $(call KernelPackage,f71808e-wdt))