define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
- DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +kmod-crypto-ecb +kmod-lib-crc16 +kmod-hid +!LINUX_3_18:kmod-crypto-cmac +!LINUX_3_18:kmod-regmap
+ DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +kmod-crypto-ecb +kmod-lib-crc16 +kmod-hid +kmod-crypto-cmac +kmod-regmap-core +kmod-crypto-ecdh
KCONFIG:= \
- CONFIG_BLUEZ \
- CONFIG_BLUEZ_L2CAP \
- CONFIG_BLUEZ_SCO \
- CONFIG_BLUEZ_RFCOMM \
- CONFIG_BLUEZ_BNEP \
- CONFIG_BLUEZ_HCIUART \
- CONFIG_BLUEZ_HCIUSB \
- CONFIG_BLUEZ_HIDP \
CONFIG_BT \
CONFIG_BT_BREDR=y \
CONFIG_BT_DEBUGFS=n \
- CONFIG_BT_L2CAP=y \
CONFIG_BT_LE=y \
- CONFIG_BT_SCO=y \
CONFIG_BT_RFCOMM \
CONFIG_BT_BNEP \
CONFIG_BT_HCIBTUSB \
CONFIG_BT_HCIBTUSB_BCM=n \
- CONFIG_BT_HCIUSB \
CONFIG_BT_HCIUART \
CONFIG_BT_HCIUART_BCM=n \
CONFIG_BT_HCIUART_INTEL=n \
CONFIG_BT_HCIUART_H4 \
- CONFIG_BT_HIDP \
- CONFIG_HID_SUPPORT=y
+ CONFIG_BT_HCIUART_NOKIA=n \
+ CONFIG_BT_HIDP
$(call AddDepends/rfkill)
FILES:= \
$(LINUX_DIR)/net/bluetooth/bluetooth.ko \
$(LINUX_DIR)/net/bluetooth/bnep/bnep.ko \
$(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
$(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
- $(LINUX_DIR)/drivers/bluetooth/btusb.ko
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,4.1.0)),1)
- FILES+= \
+ $(LINUX_DIR)/drivers/bluetooth/btusb.ko \
$(LINUX_DIR)/drivers/bluetooth/btintel.ko
-endif
AUTOLOAD:=$(call AutoProbe,bluetooth rfcomm bnep hidp hci_uart btusb)
endef
$(eval $(call KernelPackage,ath3k))
-define KernelPackage/bluetooth_6lowpan
+define KernelPackage/bluetooth-6lowpan
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth 6LoWPAN support
DEPENDS:=+kmod-6lowpan +kmod-bluetooth
AUTOLOAD:=$(call AutoProbe,bluetooth_6lowpan)
endef
-define KernelPackage/bluetooth_6lowpan/description
+define KernelPackage/bluetooth-6lowpan/description
Kernel support for 6LoWPAN over Bluetooth Low Energy devices
endef
-$(eval $(call KernelPackage,bluetooth_6lowpan))
+$(eval $(call KernelPackage,bluetooth-6lowpan))
+
+
+define KernelPackage/btmrvl
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Marvell Bluetooth Kernel Module support
+ DEPENDS:=+kmod-mmc +kmod-bluetooth +mwifiex-sdio-firmware
+ KCONFIG:= \
+ CONFIG_BT_MRVL \
+ CONFIG_BT_MRVL_SDIO
+ $(call AddDepends/bluetooth)
+ FILES:= \
+ $(LINUX_DIR)/drivers/bluetooth/btmrvl.ko \
+ $(LINUX_DIR)/drivers/bluetooth/btmrvl_sdio.ko
+ AUTOLOAD:=$(call AutoProbe,btmrvl btmrvl_sdio)
+endef
+
+define KernelPackage/btmrvl/description
+ Kernel support for Marvell SDIO Bluetooth Module
+endef
+
+$(eval $(call KernelPackage,btmrvl))
define KernelPackage/dma-buf
TITLE:=DMA shared buffer support
HIDDEN:=1
KCONFIG:=CONFIG_DMA_SHARED_BUFFER
- FILES:=$(LINUX_DIR)/drivers/dma-buf/dma-shared-buffer.ko
+ ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE)),"")
+ ifeq ($(strip $(CONFIG_KERNEL_GIT_CLONE_URI)),"")
+ FILES:=$(LINUX_DIR)/drivers/dma-buf/dma-shared-buffer.ko
+ endif
+ endif
AUTOLOAD:=$(call AutoLoad,20,dma-shared-buffer)
endef
$(eval $(call KernelPackage,dma-buf))
-define KernelPackage/nvmem
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Non Volatile Memory support
- KCONFIG:=CONFIG_NVMEM
- HIDDEN:=1
- FILES:=$(LINUX_DIR)/drivers/nvmem/nvmem_core.ko@ge4.9
-endef
-
-define KernelPackage/nvmem/description
- Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES, etc.
-endef
-
-$(eval $(call KernelPackage,nvmem))
-
define KernelPackage/eeprom-93cx6
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM 93CX6 support
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT24 support
KCONFIG:=CONFIG_EEPROM_AT24
- DEPENDS:=+kmod-i2c-core +kmod-nvmem
+ DEPENDS:=+kmod-i2c-core +kmod-regmap-i2c
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
AUTOLOAD:=$(call AutoProbe,at24)
endef
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT25 support
KCONFIG:=CONFIG_EEPROM_AT25
- DEPENDS:=+kmod-nvmem
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
AUTOLOAD:=$(call AutoProbe,at25)
endef
$(eval $(call KernelPackage,gpio-dev))
+define KernelPackage/gpio-f7188x
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Fintek F718xx/F818xx GPIO Support
+ DEPENDS:=@GPIO_SUPPORT @TARGET_x86
+ KCONFIG:=CONFIG_GPIO_F7188X
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-f7188x.ko
+ AUTOLOAD:=$(call AutoProbe,gpio-f7188x)
+endef
+
+define KernelPackage/gpio-f7188x/description
+ Kernel module for the GPIOs found on many Fintek Super-IO chips.
+endef
+
+$(eval $(call KernelPackage,gpio-f7188x))
+
+
define KernelPackage/gpio-mcp23s08
SUBMENU:=$(OTHER_MENU)
TITLE:=Microchip MCP23xxx I/O expander
- DEPENDS:=@GPIO_SUPPORT +PACKAGE_kmod-i2c-core:kmod-i2c-core
- KCONFIG:=CONFIG_GPIO_MCP23S08
- FILES:=$(LINUX_DIR)/drivers/gpio/gpio-mcp23s08.ko
- AUTOLOAD:=$(call AutoLoad,40,gpio-mcp23s08)
+ DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +kmod-regmap-i2c
+ KCONFIG:= \
+ CONFIG_GPIO_MCP23S08 \
+ CONFIG_PINCTRL_MCP23S08
+ FILES:= \
+ $(LINUX_DIR)/drivers/pinctrl/pinctrl-mcp23s08.ko
+ AUTOLOAD:=$(call AutoLoad,40,pinctrl-mcp23s08)
endef
define KernelPackage/gpio-mcp23s08/description
define KernelPackage/gpio-nxp-74hc164
SUBMENU:=$(OTHER_MENU)
TITLE:=NXP 74HC164 GPIO expander support
- KCONFIG:=CONFIG_GPIO_NXP_74HC164
- FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.ko
- AUTOLOAD:=$(call AutoProbe,nxp_74hc164)
+ KCONFIG:=CONFIG_GPIO_74X164
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-74x164.ko
+ AUTOLOAD:=$(call AutoProbe,gpio-74x164)
endef
define KernelPackage/gpio-nxp-74hc164/description
define KernelPackage/gpio-pca953x
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core
+ DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +kmod-regmap-i2c
TITLE:=PCA95xx, TCA64xx, and MAX7310 I/O ports
KCONFIG:=CONFIG_GPIO_PCA953X
FILES:=$(LINUX_DIR)/drivers/gpio/gpio-pca953x.ko
$(eval $(call KernelPackage,gpio-pcf857x))
-define KernelPackage/iio-core
+
+define KernelPackage/gpio-it87
SUBMENU:=$(OTHER_MENU)
- TITLE:=Industrial IO core
- KCONFIG:= \
- CONFIG_IIO \
- CONFIG_IIO_BUFFER=y \
- CONFIG_IIO_KFIFO_BUF \
- CONFIG_IIO_TRIGGER=y \
- CONFIG_IIO_TRIGGERED_BUFFER
- FILES:= \
- $(LINUX_DIR)/drivers/iio/industrialio.ko \
- $(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/industrialio-triggered-buffer.ko@lt4.4) \
- $(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/buffer/industrialio-triggered-buffer.ko@ge4.4) \
- $(LINUX_DIR)/drivers/iio/kfifo_buf.ko@lt4.4 \
- $(LINUX_DIR)/drivers/iio/buffer/kfifo_buf.ko@ge4.4
- AUTOLOAD:=$(call AutoLoad,55,industrialio kfifo_buf industrialio-triggered-buffer)
+ DEPENDS:=@GPIO_SUPPORT @TARGET_x86
+ TITLE:=GPIO support for IT87xx Super I/O chips
+ KCONFIG:=CONFIG_GPIO_IT87
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-it87.ko
+ AUTOLOAD:=$(call AutoLoad,25,gpio-it87,1)
endef
-define KernelPackage/iio-core/description
- The industrial I/O subsystem provides a unified framework for
- drivers for many different types of embedded sensors using a
- number of different physical interfaces (i2c, spi, etc)
+define KernelPackage/gpio-it87/description
+ This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and
+ supports the IT8761E, IT8613, IT8620E, and IT8628E Super I/O chips as
+ well.
endef
-$(eval $(call KernelPackage,iio-core))
+$(eval $(call KernelPackage,gpio-it87))
-define KernelPackage/iio-ad799x
+define KernelPackage/gpio-amd-fch
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=kmod-i2c-core kmod-iio-core
- TITLE:=Analog Devices AD799x ADC driver
- KCONFIG:= \
- CONFIG_AD799X_RING_BUFFER=y \
- CONFIG_AD799X
- FILES:=$(LINUX_DIR)/drivers/iio/adc/ad799x.ko
- AUTOLOAD:=$(call AutoLoad,56,ad799x)
+ DEPENDS:=@GPIO_SUPPORT @TARGET_x86
+ TITLE:=GPIO support for AMD Fusion Controller Hub (G-series SOCs)
+ KCONFIG:=CONFIG_GPIO_AMD_FCH
+ FILES:=$(LINUX_DIR)/drivers/gpio/gpio-amd-fch.ko
+ AUTOLOAD:=$(call AutoLoad,25,gpio-amd-fch,1)
endef
-define KernelPackage/iio-ad799x/description
- support for Analog Devices:
- ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
- i2c analog to digital converters (ADC).
+define KernelPackage/gpio-amd-fch/description
+ This option enables driver for GPIO on AMDs Fusion Controller Hub,
+ as found on G-series SOCs (eg. GX-412TC)
endef
-$(eval $(call KernelPackage,iio-ad799x))
+$(eval $(call KernelPackage,gpio-amd-fch))
-define KernelPackage/iio-dht11
+define KernelPackage/ppdev
SUBMENU:=$(OTHER_MENU)
- DEPENDS:=kmod-iio-core @GPIO_SUPPORT @USES_DEVICETREE
- TITLE:=DHT11 (and compatible) humidity and temperature sensors
+ TITLE:=Parallel port support
KCONFIG:= \
- CONFIG_DHT11
- FILES:=$(LINUX_DIR)/drivers/iio/humidity/dht11.ko
- AUTOLOAD:=$(call AutoLoad,56,dht11)
+ CONFIG_PARPORT \
+ CONFIG_PPDEV
+ FILES:= \
+ $(LINUX_DIR)/drivers/parport/parport.ko \
+ $(LINUX_DIR)/drivers/char/ppdev.ko
+ AUTOLOAD:=$(call AutoLoad,50,parport ppdev)
endef
-define KernelPackage/iio-dht11/description
- support for DHT11 and DHT22 digitial humidity and temperature sensors
- attached at GPIO lines. You will need a custom device tree file to
- specify the GPIO line to use.
+$(eval $(call KernelPackage,ppdev))
+
+
+define KernelPackage/parport-pc
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Parallel port interface (PC-style) support
+ DEPENDS:=+kmod-ppdev
+ KCONFIG:= \
+ CONFIG_KS0108=n \
+ CONFIG_PARPORT_PC \
+ CONFIG_PARPORT_1284=y \
+ CONFIG_PARPORT_PC_FIFO=y \
+ CONFIG_PARPORT_PC_PCMCIA=n \
+ CONFIG_PARPORT_PC_SUPERIO=y \
+ CONFIG_PARPORT_SERIAL=n \
+ CONFIG_PARIDE=n \
+ CONFIG_SCSI_IMM=n \
+ CONFIG_SCSI_PPA=n
+ FILES:= \
+ $(LINUX_DIR)/drivers/parport/parport_pc.ko
+ AUTOLOAD:=$(call AutoLoad,51,parport_pc)
endef
-$(eval $(call KernelPackage,iio-dht11))
+$(eval $(call KernelPackage,parport-pc))
define KernelPackage/lp
SUBMENU:=$(OTHER_MENU)
- TITLE:=Parallel port and line printer support
+ TITLE:=Parallel port line printer device support
+ DEPENDS:=+kmod-ppdev
KCONFIG:= \
- CONFIG_PARPORT \
- CONFIG_PRINTER \
- CONFIG_PPDEV
+ CONFIG_PRINTER
FILES:= \
- $(LINUX_DIR)/drivers/parport/parport.ko \
- $(LINUX_DIR)/drivers/char/lp.ko \
- $(LINUX_DIR)/drivers/char/ppdev.ko
- AUTOLOAD:=$(call AutoLoad,50,parport lp ppdev)
+ $(LINUX_DIR)/drivers/char/lp.ko
+ AUTOLOAD:=$(call AutoLoad,52,lp)
endef
$(eval $(call KernelPackage,lp))
define KernelPackage/mmc
SUBMENU:=$(OTHER_MENU)
TITLE:=MMC/SD Card Support
+ DEPENDS:=@!TARGET_uml
KCONFIG:= \
CONFIG_MMC \
CONFIG_MMC_BLOCK \
CONFIG_SDIO_UART=n
FILES:= \
$(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
- $(LINUX_DIR)/drivers/mmc/card/mmc_block.ko
+ $(LINUX_DIR)/drivers/mmc/core/mmc_block.ko
AUTOLOAD:=$(call AutoProbe,mmc_core mmc_block,1)
endef
$(eval $(call KernelPackage,mmc))
+define KernelPackage/mvsdio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Marvell MMC/SD/SDIO host driver
+ DEPENDS:=+kmod-mmc @TARGET_kirkwood
+ KCONFIG:= CONFIG_MMC_MVSDIO
+ FILES:= \
+ $(LINUX_DIR)/drivers/mmc/host/mvsdio.ko
+ AUTOLOAD:=$(call AutoProbe,mvsdio,1)
+endef
+
+define KernelPackage/mvsdio/description
+ Kernel support for the Marvell SDIO host driver.
+endef
+
+$(eval $(call KernelPackage,mvsdio))
+
+
define KernelPackage/sdhci
SUBMENU:=$(OTHER_MENU)
TITLE:=Secure Digital Host Controller Interface support
define KernelPackage/softdog
SUBMENU:=$(OTHER_MENU)
TITLE:=Software watchdog driver
- KCONFIG:=CONFIG_SOFT_WATCHDOG
+ KCONFIG:=CONFIG_SOFT_WATCHDOG \
+ CONFIG_SOFT_WATCHDOG_PRETIMEOUT=n
FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.ko
AUTOLOAD:=$(call AutoLoad,50,softdog,1)
endef
define KernelPackage/ssb
SUBMENU:=$(OTHER_MENU)
TITLE:=Silicon Sonics Backplane glue code
- DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
+ DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_bcm63xx
KCONFIG:=\
CONFIG_SSB \
CONFIG_SSB_B43_PCI_BRIDGE=y \
define KernelPackage/bcma
SUBMENU:=$(OTHER_MENU)
TITLE:=BCMA support
- DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_bcm53xx
+ DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_bcm53xx
KCONFIG:=\
CONFIG_BCMA \
CONFIG_BCMA_POSSIBLE=y \
define KernelPackage/rtc-ds1307
SUBMENU:=$(OTHER_MENU)
TITLE:=Dallas/Maxim DS1307 (and compatible) RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core +kmod-regmap-i2c +kmod-hwmon-core
KCONFIG:=CONFIG_RTC_DRV_DS1307 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1307.ko
define KernelPackage/rtc-ds1374
SUBMENU:=$(OTHER_MENU)
TITLE:=Dallas/Maxim DS1374 RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_DS1374 \
CONFIG_RTC_DRV_DS1374_WDT=n \
CONFIG_RTC_CLASS=y
define KernelPackage/rtc-ds1672
SUBMENU:=$(OTHER_MENU)
TITLE:=Dallas/Maxim DS1672 RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_DS1672 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1672.ko
$(eval $(call KernelPackage,rtc-ds1672))
+define KernelPackage/rtc-em3027
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Microelectronic EM3027 RTC support
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_EM3027 \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-em3027.ko
+ AUTOLOAD:=$(call AutoProbe,rtc-em3027)
+endef
+
+define KernelPackage/rtc-em3027/description
+ Kernel module for Microelectronic EM3027 RTC.
+endef
+
+$(eval $(call KernelPackage,rtc-em3027))
+
+
define KernelPackage/rtc-isl1208
SUBMENU:=$(OTHER_MENU)
TITLE:=Intersil ISL1208 RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_ISL1208 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-isl1208.ko
define KernelPackage/rtc-pcf8563
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF8563/Epson RTC8564 RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_PCF8563 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
define KernelPackage/rtc-pcf2123
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF2123 RTC support
- DEPENDS:=@RTC_SUPPORT
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-regmap-spi
KCONFIG:=CONFIG_RTC_DRV_PCF2123 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
$(eval $(call KernelPackage,rtc-pcf2123))
+define KernelPackage/rtc-pcf2127
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=NXP PCF2127 and PCF2129 RTC support
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core +kmod-regmap-spi
+ KCONFIG:=CONFIG_RTC_DRV_PCF2127 \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2127.ko
+ AUTOLOAD:=$(call AutoProbe,rtc-pcf2127)
+endef
+
+define KernelPackage/rtc-pcf2127/description
+ Kernel module for NXP PCF2127 and PCF2129 RTC chip
+endef
+
+$(eval $(call KernelPackage,rtc-pcf2127))
+
define KernelPackage/rtc-pt7c4338
SUBMENU:=$(OTHER_MENU)
TITLE:=Pericom PT7C4338 RTC support
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_PT7C4338 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
define KernelPackage/rtc-rs5c372a
SUBMENU:=$(OTHER_MENU)
TITLE:=Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A
- DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_RS5C372 \
CONFIG_RTC_CLASS=y
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-rs5c372.ko
$(eval $(call KernelPackage,rtc-rs5c372a))
+define KernelPackage/rtc-rx8025
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Epson RX-8025 / RX-8035
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_RX8025 \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-rx8025.ko
+ AUTOLOAD:=$(call AutoLoad,50,rtc-rx8025,1)
+endef
+
+define KernelPackage/rtc-rx8025/description
+ Kernel module for Epson RX-8025 and RX-8035 I2C RTC chip
+endef
+
+$(eval $(call KernelPackage,rtc-rx8025))
+
+define KernelPackage/rtc-s35390a
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Seico S-35390A
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_S35390A \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-s35390a.ko
+ AUTOLOAD:=$(call AutoLoad,50,rtc-s35390a,1)
+endef
+
+define KernelPackage/rtc-s35390a/description
+ Kernel module for Seiko Instruments S-35390A I2C RTC chip
+endef
+
+$(eval $(call KernelPackage,rtc-s35390a))
+
define KernelPackage/mtdtests
SUBMENU:=$(OTHER_MENU)
$(eval $(call KernelPackage,mtdtests))
+define KernelPackage/mtdoops
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Log panic/oops to an MTD buffer
+ KCONFIG:=CONFIG_MTD_OOPS
+ FILES:=$(LINUX_DIR)/drivers/mtd/mtdoops.ko
+endef
+
+define KernelPackage/mtdoops/description
+ Kernel modules for Log panic/oops to an MTD buffer
+endef
+
+$(eval $(call KernelPackage,mtdoops))
+
+
+define KernelPackage/mtdram
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Test MTD driver using RAM
+ KCONFIG:=CONFIG_MTD_MTDRAM \
+ CONFIG_MTDRAM_TOTAL_SIZE=4096 \
+ CONFIG_MTDRAM_ERASE_SIZE=128
+ FILES:=$(LINUX_DIR)/drivers/mtd/devices/mtdram.ko
+endef
+
+define KernelPackage/mtdram/description
+ Test MTD driver using RAM
+endef
+
+$(eval $(call KernelPackage,mtdram))
+
+
define KernelPackage/serial-8250
SUBMENU:=$(OTHER_MENU)
TITLE:=8250 UARTs
KCONFIG:= CONFIG_SERIAL_8250 \
+ CONFIG_SERIAL_8250_PCI \
CONFIG_SERIAL_8250_NR_UARTS=16 \
- CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
- CONFIG_SERIAL_8250_EXTENDED=y \
- CONFIG_SERIAL_8250_MANY_PORTS=y \
+ CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
+ CONFIG_SERIAL_8250_EXTENDED=y \
+ CONFIG_SERIAL_8250_MANY_PORTS=y \
CONFIG_SERIAL_8250_SHARE_IRQ=y \
CONFIG_SERIAL_8250_DETECT_IRQ=n \
CONFIG_SERIAL_8250_RSA=n
FILES:= \
$(LINUX_DIR)/drivers/tty/serial/8250/8250.ko \
- $(LINUX_DIR)/drivers/tty/serial/8250/8250_base.ko@ge4.4
+ $(LINUX_DIR)/drivers/tty/serial/8250/8250_base.ko \
+ $(if $(CONFIG_PCI),$(LINUX_DIR)/drivers/tty/serial/8250/8250_pci.ko) \
+ $(if $(CONFIG_GPIOLIB),$(LINUX_DIR)/drivers/tty/serial/serial_mctrl_gpio.ko)
+ AUTOLOAD:=$(call AutoProbe,8250 8250_base 8250_pci)
endef
define KernelPackage/serial-8250/description
$(eval $(call KernelPackage,serial-8250))
-define KernelPackage/regmap
+define KernelPackage/serial-8250-exar
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Exar 8250 UARTs
+ KCONFIG:= CONFIG_SERIAL_8250_EXAR
+ FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250_exar.ko
+ AUTOLOAD:=$(call AutoProbe,8250 8250_base 8250_exar)
+ DEPENDS:=+kmod-serial-8250
+endef
+
+define KernelPackage/serial-8250-exar/description
+ Kernel module for Exar serial ports
+endef
+
+$(eval $(call KernelPackage,serial-8250-exar))
+
+
+define KernelPackage/regmap-core
SUBMENU:=$(OTHER_MENU)
TITLE:=Generic register map support
- DEPENDS:=+kmod-lib-lzo +kmod-i2c-core
- KCONFIG:=CONFIG_REGMAP \
- CONFIG_REGMAP_MMIO \
- CONFIG_REGMAP_SPI \
- CONFIG_REGMAP_I2C \
- CONFIG_SPI=y
- FILES:= \
- $(LINUX_DIR)/drivers/base/regmap/regmap-core.ko \
- $(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko \
- $(LINUX_DIR)/drivers/base/regmap/regmap-mmio.ko \
- $(if $(CONFIG_SPI),$(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko)
- AUTOLOAD:=$(call AutoLoad,21,regmap-core regmap-i2c regmap-mmio regmap-spi)
+ HIDDEN:=1
+ KCONFIG:=CONFIG_REGMAP
+ifneq ($(wildcard $(LINUX_DIR)/drivers/base/regmap/regmap-core.ko),)
+ FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-core.ko
+endif
endef
-define KernelPackage/regmap/description
+define KernelPackage/regmap-core/description
Generic register map support
endef
-$(eval $(call KernelPackage,regmap))
+$(eval $(call KernelPackage,regmap-core))
+
+
+define KernelPackage/regmap-spi
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=SPI register map support
+ DEPENDS:=+kmod-regmap-core
+ HIDDEN:=1
+ KCONFIG:=CONFIG_REGMAP_SPI \
+ CONFIG_SPI=y
+ FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko
+endef
+
+define KernelPackage/regmap-spi/description
+ SPI register map support
+endef
+
+$(eval $(call KernelPackage,regmap-spi))
+
+
+define KernelPackage/regmap-i2c
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=I2C register map support
+ DEPENDS:=+kmod-regmap-core +kmod-i2c-core
+ HIDDEN:=1
+ KCONFIG:=CONFIG_REGMAP_I2C
+ FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko
+endef
+
+define KernelPackage/regmap-i2c/description
+ I2C register map support
+endef
+
+$(eval $(call KernelPackage,regmap-i2c))
+
+
+define KernelPackage/regmap-mmio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MMIO register map support
+ DEPENDS:=+kmod-regmap-core
+ HIDDEN:=1
+ KCONFIG:=CONFIG_REGMAP_MMIO
+ FILES:=$(LINUX_DIR)/drivers/base/regmap/regmap-mmio.ko
+endef
+
+define KernelPackage/regmap-mmio/description
+ MMIO register map support
+endef
+
+$(eval $(call KernelPackage,regmap-mmio))
+
define KernelPackage/ikconfig
SUBMENU:=$(OTHER_MENU)
define KernelPackage/zram
SUBMENU:=$(OTHER_MENU)
TITLE:=ZRAM
- DEPENDS:=+kmod-lib-lzo +kmod-lib-lz4
+ DEPENDS:=+kmod-lib-lzo
KCONFIG:= \
CONFIG_ZSMALLOC \
CONFIG_ZRAM \
CONFIG_ZRAM_DEBUG=n \
CONFIG_PGTABLE_MAPPING=n \
- CONFIG_ZSMALLOC_STAT=n \
- CONFIG_ZRAM_LZ4_COMPRESS=y
+ CONFIG_ZRAM_WRITEBACK=n \
+ CONFIG_ZSMALLOC_STAT=n
FILES:= \
$(LINUX_DIR)/mm/zsmalloc.ko \
$(LINUX_DIR)/drivers/block/zram/zram.ko
$(eval $(call KernelPackage,ptp))
-define KernelPackage/ptp-gianfar
+define KernelPackage/ptp-qoriq
SUBMENU:=$(OTHER_MENU)
- TITLE:=Freescale Gianfar PTP support
+ TITLE:=Freescale QorIQ PTP support
DEPENDS:=@TARGET_mpc85xx +kmod-ptp
- KCONFIG:=CONFIG_PTP_1588_CLOCK_GIANFAR
- FILES:=$(LINUX_DIR)/drivers/net/ethernet/freescale/gianfar_ptp.ko
- AUTOLOAD:=$(call AutoProbe,gianfar_ptp)
+ KCONFIG:=CONFIG_PTP_1588_CLOCK_QORIQ
+ FILES:=$(LINUX_DIR)/drivers/ptp/ptp-qoriq.ko
+ AUTOLOAD:=$(call AutoProbe,ptp-qoriq)
endef
-define KernelPackage/ptp-gianfar/description
+
+define KernelPackage/ptp-qoriq/description
Kernel module for IEEE 1588 support for Freescale
- Gianfar Ethernet drivers
+ QorIQ Ethernet drivers
endef
-$(eval $(call KernelPackage,ptp-gianfar))
-
+$(eval $(call KernelPackage,ptp-qoriq))
define KernelPackage/random-core
SUBMENU:=$(OTHER_MENU)
$(eval $(call KernelPackage,random-core))
-define KernelPackage/random-omap
- SUBMENU:=$(OTHER_MENU)
- TITLE:=Hardware Random Number Generator OMAP support
- KCONFIG:=CONFIG_HW_RANDOM_OMAP
- FILES:=$(LINUX_DIR)/drivers/char/hw_random/omap-rng.ko
- DEPENDS:=@TARGET_omap24xx +kmod-random-core
- AUTOLOAD:=$(call AutoProbe,random-omap)
-endef
-
-define KernelPackage/random-omap/description
- Kernel module for the OMAP Random Number Generator
- found on OMAP16xx, OMAP2/3/4/5 and AM33xx/AM43xx multimedia processors.
-endef
-
-$(eval $(call KernelPackage,random-omap))
define KernelPackage/thermal
SUBMENU:=$(OTHER_MENU)
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y \
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=n \
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=n \
+ CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 \
CONFIG_THERMAL_GOV_FAIR_SHARE=n \
CONFIG_THERMAL_GOV_STEP_WISE=y \
CONFIG_THERMAL_GOV_USER_SPACE=n \
$(eval $(call KernelPackage,echo))
-define KernelPackage/bmp085
+define KernelPackage/keys-encrypted
SUBMENU:=$(OTHER_MENU)
- TITLE:=BMP085/BMP18x pressure sensor
- DEPENDS:= +kmod-regmap @!LINUX_3_18 @!LINUX_4_1
- KCONFIG:= CONFIG_BMP085
- FILES:= $(LINUX_DIR)/drivers/misc/bmp085.ko
+ TITLE:=encrypted keys on kernel keyring
+ DEPENDS:=@KERNEL_KEYS +kmod-crypto-cbc +kmod-crypto-hmac +kmod-crypto-rng \
+ +kmod-crypto-sha256 +kmod-keys-trusted
+ KCONFIG:=CONFIG_ENCRYPTED_KEYS
+ FILES:=$(LINUX_DIR)/security/keys/encrypted-keys/encrypted-keys.ko
+ AUTOLOAD:=$(call AutoLoad,01,encrypted-keys,1)
endef
-define KernelPackage/bmp085/description
- This driver adds support for Bosch Sensortec's digital pressure
- sensors BMP085 and BMP18x.
+define KernelPackage/keys-encrypted/description
+ This module provides support for create/encrypting/decrypting keys
+ in the kernel. Encrypted keys are kernel generated random numbers,
+ which are encrypted/decrypted with a 'master' symmetric key. The
+ 'master' key can be either a trusted-key or user-key type.
+ Userspace only ever sees/stores encrypted blobs.
endef
-$(eval $(call KernelPackage,bmp085))
+$(eval $(call KernelPackage,keys-encrypted))
-define KernelPackage/bmp085-i2c
+define KernelPackage/keys-trusted
SUBMENU:=$(OTHER_MENU)
- TITLE:=BMP085/BMP18x pressure sensor I2C
- DEPENDS:= +kmod-bmp085
- KCONFIG:= CONFIG_BMP085_I2C
- FILES:= $(LINUX_DIR)/drivers/misc/bmp085-i2c.ko
- AUTOLOAD:=$(call AutoProbe,bmp085-i2c)
-endef
-define KernelPackage/bmp085-i2c/description
- This driver adds support for Bosch Sensortec's digital pressure
- sensor connected via I2C.
+ TITLE:=TPM trusted keys on kernel keyring
+ DEPENDS:=@KERNEL_KEYS +kmod-crypto-hash +kmod-crypto-hmac +kmod-crypto-sha1 +kmod-tpm
+ KCONFIG:=CONFIG_TRUSTED_KEYS
+ FILES:=$(LINUX_DIR)/security/keys/trusted.ko
+ AUTOLOAD:=$(call AutoLoad,01,trusted-keys,1)
endef
-$(eval $(call KernelPackage,bmp085-i2c))
-
-
-define KernelPackage/bmp085-spi
- SUBMENU:=$(OTHER_MENU)
- TITLE:=BMP085/BMP18x pressure sensor SPI
- DEPENDS:= +kmod-bmp085
- KCONFIG:= CONFIG_BMP085_SPI
- FILES:= $(LINUX_DIR)/drivers/misc/bmp085-spi.ko
- AUTOLOAD:=$(call AutoProbe,bmp085-spi)
-endef
-define KernelPackage/bmp085-spi/description
- This driver adds support for Bosch Sensortec's digital pressure
- sensor connected via SPI.
+define KernelPackage/keys-trusted/description
+ This module provides support for creating, sealing, and unsealing
+ keys in the kernel. Trusted keys are random number symmetric keys,
+ generated and RSA-sealed by the TPM. The TPM only unseals the keys,
+ if the boot PCRs and other criteria match. Userspace will only ever
+ see encrypted blobs.
endef
-$(eval $(call KernelPackage,bmp085-spi))
+$(eval $(call KernelPackage,keys-trusted))
+
define KernelPackage/tpm
SUBMENU:=$(OTHER_MENU)
TITLE:=TPM Hardware Support
+ DEPENDS:= +kmod-random-core
KCONFIG:= CONFIG_TCG_TPM
FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm.ko
AUTOLOAD:=$(call AutoLoad,10,tpm,1)
endef
$(eval $(call KernelPackage,tpm-i2c-atmel))
+
+define KernelPackage/tpm-i2c-infineon
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:= TPM I2C Infineon driver
+ DEPENDS:= +kmod-tpm +kmod-i2c-core
+ KCONFIG:= CONFIG_TCG_TIS_I2C_INFINEON
+ FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm_i2c_infineon.ko
+ AUTOLOAD:= $(call AutoLoad,40,tpm_i2c_infineon,1)
+endef
+
+define KernelPackage/tpm-i2c-infineon/description
+ This enables the TPM Interface Specification 1.2 Interface (I2C - Infineon)
+endef
+
+$(eval $(call KernelPackage,tpm-i2c-infineon))
+
+
+define KernelPackage/w83627hf-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Winbond 83627HF Watchdog Timer
+ KCONFIG:=CONFIG_W83627HF_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/w83627hf_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,w83627hf-wdt,1)
+endef
+
+define KernelPackage/w83627hf-wdt/description
+ Kernel module for Winbond 83627HF Watchdog Timer
+endef
+
+$(eval $(call KernelPackage,w83627hf-wdt))
+
+
+define KernelPackage/itco-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Intel iTCO Watchdog Timer
+ KCONFIG:=CONFIG_ITCO_WDT \
+ CONFIG_ITCO_VENDOR_SUPPORT=y
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/iTCO_wdt.ko \
+ $(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/iTCO_vendor_support.ko
+ AUTOLOAD:=$(call AutoLoad,50,iTCO_vendor_support iTCO_wdt,1)
+endef
+
+define KernelPackage/itco-wdt/description
+ Kernel module for Intel iTCO Watchdog Timer
+endef
+
+$(eval $(call KernelPackage,itco-wdt))
+
+
+define KernelPackage/it87-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=ITE IT87 Watchdog Timer
+ KCONFIG:=CONFIG_IT87_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/it87_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,it87-wdt,1)
+ MODPARAMS.it87-wdt:= \
+ nogameport=1 \
+ nocir=1
+endef
+
+define KernelPackage/it87-wdt/description
+ Kernel module for ITE IT87 Watchdog Timer
+endef
+
+$(eval $(call KernelPackage,it87-wdt))
+
+
+define KernelPackage/f71808e-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Fintek F718xx/F818xx Watchdog Timer
+ DEPENDS:=@TARGET_x86
+ KCONFIG:=CONFIG_F71808E_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/f71808e_wdt.ko
+ AUTOLOAD:=$(call AutoProbe,f71808e-wdt,1)
+endef
+
+define KernelPackage/f71808e-wdt/description
+ Kernel module for the watchdog timer found on many Fintek Super-IO chips.
+endef
+
+$(eval $(call KernelPackage,f71808e-wdt))