kernel: 5.10: update kmod-usb-net-smsc95xx

[openwrt/staging/nbd.git] / package / kernel / linux / modules / usb.mk

diff --git a/package/kernel/linux/modules/usb.mk b/package/kernel/linux/modules/usb.mk
index 9ef3fb5974f1f3ebff86e302587146e5e386a2f8..9e8752cc64e3c6b585e2cbfac317a0f0da87f2ac 100644 (file)
--- a/package/kernel/linux/modules/usb.mk
+++ b/package/kernel/linux/modules/usb.mk
@@ -561,7 +561,7 @@ $(eval $(call KernelPackage,usb-serial))
 
 define AddDepends/usb-serial
   SUBMENU:=$(USB_MENU)
-  DEPENDS+=kmod-usb-serial $(1)
+  DEPENDS+=+kmod-usb-serial $(1)
 endef
 
 
@@ -1216,6 +1216,7 @@ $(eval $(call KernelPackage,usb-net-mcs7830))
 
 define KernelPackage/usb-net-smsc95xx
   TITLE:=SMSC LAN95XX based USB 2.0 10/100 ethernet devices
+  DEPENDS:=+LINUX_5_10:kmod-libphy
   KCONFIG:=CONFIG_USB_NET_SMSC95XX
   FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/smsc95xx.ko
   AUTOLOAD:=$(call AutoProbe,smsc95xx)
@@ -1649,25 +1650,22 @@ endef
 
 $(eval $(call KernelPackage,usbmon))
 
-XHCI_MODULES := xhci-hcd xhci-pci xhci-plat-hcd
-ifdef CONFIG_TARGET_ramips_mt7621
-  XHCI_MODULES += xhci-mtk
-endif
+XHCI_MODULES := xhci-pci xhci-plat-hcd
 XHCI_FILES := $(wildcard $(patsubst %,$(LINUX_DIR)/drivers/usb/host/%.ko,$(XHCI_MODULES)))
 XHCI_AUTOLOAD := $(patsubst $(LINUX_DIR)/drivers/usb/host/%.ko,%,$(XHCI_FILES))
 
 define KernelPackage/usb3
   TITLE:=Support for USB3 controllers
   DEPENDS:= \
+       +kmod-usb-xhci-hcd \
        +TARGET_bcm53xx:kmod-usb-bcma \
-       +TARGET_bcm53xx:kmod-phy-bcm-ns-usb3
+       +TARGET_bcm53xx:kmod-phy-bcm-ns-usb3 \
+       +TARGET_ramips_mt7621:kmod-usb-xhci-mtk \
+       +(TARGET_apm821xx_nand&&LINUX_5_10):kmod-usb-xhci-pci-renesas
   KCONFIG:= \
        CONFIG_USB_PCI=y \
-       CONFIG_USB_XHCI_HCD \
        CONFIG_USB_XHCI_PCI \
-       CONFIG_USB_XHCI_PLATFORM \
-       CONFIG_USB_XHCI_MTK \
-       CONFIG_USB_XHCI_HCD_DEBUGGING=n
+       CONFIG_USB_XHCI_PLATFORM
   FILES:= \
        $(XHCI_FILES)
   AUTOLOAD:=$(call AutoLoad,54,$(XHCI_AUTOLOAD),1)
@@ -1713,6 +1711,60 @@ endef
 $(eval $(call KernelPackage,usb-roles))
 
 
+define KernelPackage/usb-xhci-hcd
+  TITLE:=xHCI HCD (USB 3.0) support
+  KCONFIG:= \
+         CONFIG_USB_XHCI_HCD \
+         CONFIG_USB_XHCI_HCD_DEBUGGING=n
+  HIDDEN:=1
+  FILES:=$(LINUX_DIR)/drivers/usb/host/xhci-hcd.ko
+  AUTOLOAD:=$(call AutoLoad,54,xhci-hcd,1)
+  $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-xhci-hcd/description
+  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
+  "SuperSpeed" host controller hardware.
+endef
+
+$(eval $(call KernelPackage,usb-xhci-hcd))
+
+
+define KernelPackage/usb-xhci-mtk
+  TITLE:=xHCI support for MediaTek SoCs
+  DEPENDS:=+kmod-usb-xhci-hcd
+  KCONFIG:=CONFIG_USB_XHCI_MTK
+  HIDDEN:=1
+  FILES:=$(LINUX_DIR)/drivers/usb/host/xhci-mtk.ko
+  AUTOLOAD:=$(call AutoLoad,54,xhci-mtk,1)
+  $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-xhci-mtk/description
+  Kernel support for the xHCI host controller found in MediaTek SoCs.
+endef
+
+$(eval $(call KernelPackage,usb-xhci-mtk))
+
+
+define KernelPackage/usb-xhci-pci-renesas
+  TITLE:=Support for additional Renesas xHCI controller with firmware
+  DEPENDS:=@LINUX_5_10
+  KCONFIG:=CONFIG_USB_XHCI_PCI_RENESAS
+  HIDDEN:=1
+  FILES:=$(LINUX_DIR)/drivers/usb/host/xhci-pci-renesas.ko
+  AUTOLOAD:=$(call AutoLoad,54,xhci-pci-renesas,1)
+  $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-xhci-pci-renesas/description
+  Kernel support for the Renesas xHCI controller with firmware. Make sure you have
+  the firwmare for the device and installed on your system for this device to work.
+endef
+
+$(eval $(call KernelPackage,usb-xhci-pci-renesas))
+
+
 define KernelPackage/chaoskey
   SUBMENU:=$(USB_MENU)
   TITLE:=Chaoskey hardware RNG support