config_add_string path phy 'macaddr:macaddr'
config_add_string hwmode
config_add_string tx_burst
+ config_add_string distance
config_add_int beacon_int chanbw frag rts
- config_add_int rxantenna txantenna antenna_gain txpower distance
+ config_add_int rxantenna txantenna antenna_gain txpower
config_add_boolean noscan ht_coex acs_exclude_dfs
config_add_array ht_capab
config_add_array channels
config_add_string 'macaddr:macaddr' ifname
config_add_boolean wds powersave enable
+ config_add_string wds_bridge
config_add_int maxassoc
config_add_int max_listen_int
config_add_int dtim_period
json_select config
[ "$auto_channel" -gt 0 ] && channel=acs_survey
- [ "$auto_channel" -gt 0 ] && json_get_values channel_list channels
[ "$auto_channel" -gt 0 ] && json_get_vars acs_exclude_dfs
[ -n "$acs_exclude_dfs" ] && [ "$acs_exclude_dfs" -gt 0 ] &&
json_get_vars noscan ht_coex
json_get_values ht_capab_list ht_capab tx_burst
+ json_get_values channel_list channels
set_default noscan 0
EOF
json_select ..
+ radio_md5sum=$(md5sum $hostapd_conf_file | cut -d" " -f1)
+ echo "radio_config_id=${radio_md5sum}" >> $hostapd_conf_file
}
mac80211_hostapd_setup_bss() {
append hostapd_cfg "$type=$ifname" "$N"
hostapd_set_bss_options hostapd_cfg "$vif" || return 1
- json_get_vars wds dtim_period max_listen_int start_disabled
+ json_get_vars wds wds_bridge dtim_period max_listen_int start_disabled
set_default wds 0
set_default start_disabled 0
- [ "$wds" -gt 0 ] && append hostapd_cfg "wds_sta=1" "$N"
+ [ "$wds" -gt 0 ] && {
+ append hostapd_cfg "wds_sta=1" "$N"
+ [ -n "$wds_bridge" ] && append hostapd_cfg "wds_bridge=$wds_bridge" "$N"
+ }
[ "$staidx" -gt 0 -o "$start_disabled" -eq 1 ] && append hostapd_cfg "start_disabled=1" "$N"
cat >> /var/run/hostapd-$phy.conf <<EOF
local phy="$1"
local idx="$(($2 + 1))"
- head -n $(($macidx + 1)) /sys/class/ieee80211/${phy}/addresses | tail -n1
+ head -n $idx /sys/class/ieee80211/${phy}/addresses | tail -n1
}
mac80211_generate_mac() {
[ "$((0x$mask1))" -gt 0 ] && {
b1="0x$1"
[ "$id" -gt 0 ] && \
- b1=$(($b1 ^ ((($id - 1) << 2) | 0x2)))
+ b1=$(($b1 ^ ((($id - !($b1 & 2)) << 2) | 0x2)))
printf "%02x:%s:%s:%s:%s:%s" $b1 $2 $3 $4 $5 $6
return
}
local type="$3"
local wdsflag="$4"
local rc
+ local oldifname
- iw phy "$phy" interface add "$ifname" type "$type" $wdsflag
+ iw phy "$phy" interface add "$ifname" type "$type" $wdsflag >/dev/null 2>&1
rc="$?"
[ "$rc" = 233 ] && {
# Device might have just been deleted, give the kernel some time to finish cleaning it up
sleep 1
- iw phy "$phy" interface add "$ifname" type "$type" $wdsflag
+ iw phy "$phy" interface add "$ifname" type "$type" $wdsflag >/dev/null 2>&1
rc="$?"
}
[ "$rc" = 233 ] && {
# Keep matching pre-existing interface
[ -d "/sys/class/ieee80211/${phy}/device/net/${ifname}" ] && \
- case "$(iw dev wlan0 info | grep "^\ttype" | cut -d' ' -f2- 2>/dev/null)" in
+ case "$(iw dev $ifname info | grep "^\ttype" | cut -d' ' -f2- 2>/dev/null)" in
"AP")
[ "$type" = "__ap" ] && rc=0
;;
}
[ "$rc" = 233 ] && {
- iw dev "$ifname" del
- sleep 1
+ iw dev "$ifname" del >/dev/null 2>&1
+ [ "$?" = 0 ] && {
+ sleep 1
- iw phy "$phy" interface add "$ifname" type "$type" $wdsflag
- rc="$?"
+ iw phy "$phy" interface add "$ifname" type "$type" $wdsflag >/dev/null 2>&1
+ rc="$?"
+ }
}
- [ "$rc" = 233 ] && {
+ [ "$rc" != 0 ] && {
# Device might not support virtual interfaces, so the interface never got deleted in the first place.
# Check if the interface already exists, and avoid failing in this case.
- ip link show dev "$ifname" >/dev/null 2>/dev/null && rc=0
+ [ -d "/sys/class/ieee80211/${phy}/device/net/${ifname}" ] && rc=0
+ }
+
+ [ "$rc" != 0 ] && {
+ # Device doesn't support virtual interfaces and may have existing interface other than ifname.
+ oldifname="$(basename "/sys/class/ieee80211/${phy}/device/net"/* 2>/dev/null)"
+ [ "$oldifname" ] && ip link set "$oldifname" name "$ifname" 1>/dev/null 2>&1
+ rc="$?"
}
[ "$rc" != 0 ] && wireless_setup_failed INTERFACE_CREATION_FAILED
mac80211_prepare_vif() {
json_select config
- json_get_vars ifname mode ssid wds powersave macaddr enable
+ json_get_vars ifname mode ssid wds powersave macaddr enable wpa_psk_file vlan_file
[ -n "$ifname" ] || ifname="wlan${phy#phy}${if_idx:+-$if_idx}"
if_idx=$((${if_idx:-0} + 1))
json_add_object data
json_add_string ifname "$ifname"
json_close_object
+
+ [ "$mode" == "ap" ] && {
+ [ -z "$wpa_psk_file" ] && hostapd_set_psk "$ifname"
+ [ -z "$vlan_file" ] && hostapd_set_vlan "$ifname"
+ }
+
json_select config
# It is far easier to delete and create the desired interface
NEWAPLIST="${NEWAPLIST}$ifname "
[ -n "$hostapd_ctrl" ] || {
+ ap_ifname="${ifname}"
hostapd_ctrl="${hostapd_ctrl:-/var/run/hostapd/$ifname}"
}
;;
local add_sp=0
local spobj="$(ubus -S list | grep wpa_supplicant.${ifname})"
- wpa_supplicant_prepare_interface "$ifname" nl80211 || return 1
+ [ "$enable" = 0 ] && {
+ ubus call wpa_supplicant.${phy} config_del "{\"iface\":\"$ifname\"}"
+ ip link set dev "$ifname" down
+ iw dev "$ifname" del
+ return 0
+ }
+
wpa_supplicant_prepare_interface "$ifname" nl80211 || {
iw dev "$ifname" del
return 1
NEWSPLIST="${NEWSPLIST}$ifname "
if [ "${NEWAPLIST%% *}" != "${OLDAPLIST%% *}" ]; then
- [ "$spobj" ] && ubus call wpa_supplicant.${phy} config_del "{\"iface\":\"$ifname\"}"
+ [ "$spobj" ] && ubus call wpa_supplicant config_remove "{\"iface\":\"$ifname\"}"
add_sp=1
fi
- [ "$enable" = 0 ] && {
- ubus call wpa_supplicant.${phy} config_del "{\"iface\":\"$ifname\"}"
- ip link set dev "$ifname" down
- return 0
- }
[ -z "$spobj" ] && add_sp=1
+ NEW_MD5_SP=$(test -e "${_config}" && md5sum ${_config})
+ OLD_MD5_SP=$(uci -q -P /var/state get wireless._${phy}.md5_${ifname})
if [ "$add_sp" = "1" ]; then
wpa_supplicant_run "$ifname" "$hostapd_ctrl"
else
- ubus call $spobj reload
+ [ "${NEW_MD5_SP}" == "${OLD_MD5_SP}" ] || ubus call $spobj reload
fi
+ uci -q -P /var/state set wireless._${phy}.md5_${ifname}="${NEW_MD5_SP}"
+ return 0
}
mac80211_setup_supplicant_noctl() {
NEWSPLIST="${NEWSPLIST}$ifname "
[ "$enable" = 0 ] && {
- ubus call wpa_supplicant.${phy} config_del "{\"iface\":\"$ifname\"}"
+ ubus call wpa_supplicant config_remove "{\"iface\":\"$ifname\"}"
ip link set dev "$ifname" down
return 0
}
json_get_var vif_enable enable 1
[ "$vif_enable" = 1 ] || action=down
- logger ip link set dev "$ifname" $action
- ip link set dev "$ifname" "$action" || {
- wireless_setup_vif_failed IFUP_ERROR
- json_select ..
- return
- }
- [ -z "$vif_txpower" ] || iw dev "$ifname" set txpower fixed "${vif_txpower%%.*}00"
+ if [ "$mode" != "ap" ] || [ "$ifname" = "$ap_ifname" ]; then
+ ip link set dev "$ifname" "$action" || {
+ wireless_setup_vif_failed IFUP_ERROR
+ json_select ..
+ return
+ }
+ [ -z "$vif_txpower" ] || iw dev "$ifname" set txpower fixed "${vif_txpower%%.*}00"
+ fi
case "$mode" in
mesh)
wireless_vif_parse_encryption
+ [ -z "$htmode" ] && htmode="NOHT";
freq="$(get_freq "$phy" "$channel")"
if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ] || chan_is_dfs "$phy" "$channel"; then
mac80211_setup_supplicant $vif_enable || failed=1
local vaps="$2"
for wdev in $vaps; do
- [ "$service" != "none" ] && ubus call ${service}.${phy} config_remove "{\"iface\":\"$wdev\"}"
+ [ "$service" != "none" ] && ubus call ${service} config_remove "{\"iface\":\"$wdev\"}"
ip link set dev "$wdev" down 2>/dev/null
iw dev "$wdev" del
done
staidx=0
[ -n "$chanbw" ] && {
- for file in /sys/kernel/debug/ieee80211/$phy/ath9k/chanbw /sys/kernel/debug/ieee80211/$phy/ath5k/bwmode; do
+ for file in /sys/kernel/debug/ieee80211/$phy/ath9k*/chanbw /sys/kernel/debug/ieee80211/$phy/ath5k/bwmode; do
[ -f "$file" ] && echo "$chanbw" > "$file"
done
}
[ "$rxantenna" = "all" ] && rxantenna=0xffffffff
iw phy "$phy" set antenna $txantenna $rxantenna >/dev/null 2>&1
- iw phy "$phy" set antenna_gain $antenna_gain
- iw phy "$phy" set distance "$distance"
+ iw phy "$phy" set antenna_gain $antenna_gain >/dev/null 2>&1
+ iw phy "$phy" set distance "$distance" >/dev/null 2>&1
if [ -n "$txpower" ]; then
iw phy "$phy" set txpower fixed "${txpower%%.*}00"
has_ap=
hostapd_ctrl=
+ ap_ifname=
hostapd_noscan=
for_each_interface "ap" mac80211_check_ap
OLD_MD5=$(uci -q -P /var/state get wireless._${phy}.md5)
if [ "${NEWAPLIST}" != "${OLDAPLIST}" ]; then
mac80211_vap_cleanup hostapd "${OLDAPLIST}"
- [ -n "${NEWAPLIST}" ] && mac80211_iw_interface_add "$phy" "${NEWAPLIST%% *}" __ap || return
fi
+ [ -n "${NEWAPLIST}" ] && mac80211_iw_interface_add "$phy" "${NEWAPLIST%% *}" __ap
local add_ap=0
local primary_ap=${NEWAPLIST%% *}
[ -n "$hostapd_ctrl" ] && {
+ local no_reload=1
if [ -n "$(ubus list | grep hostapd.$primary_ap)" ]; then
[ "${NEW_MD5}" = "${OLD_MD5}" ] || {
ubus call hostapd.$primary_ap reload
+ no_reload=$?
+ if [ "$no_reload" != "0" ]; then
+ mac80211_vap_cleanup hostapd "${OLDAPLIST}"
+ mac80211_vap_cleanup wpa_supplicant "$(uci -q -P /var/state get wireless._${phy}.splist)"
+ mac80211_vap_cleanup none "$(uci -q -P /var/state get wireless._${phy}.umlist)"
+ sleep 2
+ mac80211_iw_interface_add "$phy" "${NEWAPLIST%% *}" __ap
+ for_each_interface "sta adhoc mesh monitor" mac80211_prepare_vif
+ fi
}
- else
+ fi
+ if [ "$no_reload" != "0" ]; then
add_ap=1
- ubus wait_for hostapd.$phy
- ubus call hostapd.${phy} config_add "{\"iface\":\"$primary_ap\", \"config\":\"${hostapd_conf_file}\"}"
- local hostapd_pid=$(ubus call service list '{"name": "hostapd"}' | jsonfilter -l 1 -e "@['hostapd'].instances['hostapd-${phy}'].pid")
+ ubus wait_for hostapd
+ ubus call hostapd config_add "{\"iface\":\"$primary_ap\", \"config\":\"${hostapd_conf_file}\"}"
+ local hostapd_pid=$(ubus call service list '{"name": "hostapd"}' | jsonfilter -l 1 -e "@['hostapd'].instances['hostapd'].pid")
wireless_add_process "$hostapd_pid" "/usr/sbin/hostapd" 1
fi
ret="$?"