# Driver interface for no driver (e.g., RADIUS server only)
#CONFIG_DRIVER_NONE=y
-# IEEE 802.11F/IAPP
-CONFIG_IAPP=y
-
# WPA2/IEEE 802.11i RSN pre-authentication
CONFIG_RSN_PREAUTH=y
-# IEEE 802.11w (management frame protection)
-#CONFIG_IEEE80211W=y
-
# Support Operating Channel Validation
CONFIG_OCV=y
# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
#CONFIG_DRIVER_RADIUS_ACL=y
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
# Wireless Network Management (IEEE Std 802.11v-2011)
# Note: This is experimental and not complete implementation.
CONFIG_WNM=y
CONFIG_IEEE80211AC=y
# IEEE 802.11ax HE support
+#CONFIG_IEEE80211AX=y
+
+# IEEE 802.11be EHT support
+# CONFIG_IEEE80211AX is mandatory for setting CONFIG_IEEE80211BE.
# Note: This is experimental and work in progress. The definitions are still
# subject to change and this should not be expected to interoperate with the
-# final IEEE 802.11ax version.
-#CONFIG_IEEE80211AX=y
+# final IEEE 802.11be version.
+#CONFIG_IEEE80211BE=y
+
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+#CONFIG_SAE=y
+
+# SAE Public Key, WPA3-Personal
+#CONFIG_SAE_PK=y
# Remove debugging code that is printing out debug messages to stdout.
# This can be used to reduce the size of the hostapd considerably if debugging
# * ath10k
#
# For more details refer to:
-# http://wireless.kernel.org/en/users/Documentation/acs
+# https://wireless.wiki.kernel.org/en/users/documentation/acs
#
#CONFIG_ACS=y
# Multiband Operation support
-# These extentions facilitate efficient use of multiple frequency bands
+# These extensions facilitate efficient use of multiple frequency bands
# available to the AP and the devices that may associate with it.
#CONFIG_MBO=y
# Airtime policy support
CONFIG_AIRTIME_POLICY=y
-# Proxy ARP support
-CONFIG_PROXYARP=y
-
# Override default value for the wpa_disable_eapol_key_retries configuration
# parameter. See that parameter in hostapd.conf for more details.
#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
+# Wired equivalent privacy (WEP)
+# WEP is an obsolete cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used for anything anymore. The
+# functionality needed to use WEP is available in the current hostapd
+# release under this optional build parameter. This functionality is subject to
+# be completely removed in a future release.
+#CONFIG_WEP=y
+
+# Remove all TKIP functionality
+# TKIP is an old cryptographic data confidentiality algorithm that is not
+# considered secure. It should not be used anymore. For now, the default hostapd
+# build includes this to allow mixed mode WPA+WPA2 networks to be enabled, but
+# that functionality is subject to be removed in the future.
+#CONFIG_NO_TKIP=y
+
+# Pre-Association Security Negotiation (PASN)
+# Experimental implementation based on IEEE P802.11z/D2.6 and the protocol
+# design is still subject to change. As such, this should not yet be enabled in
+# production use.
+#CONFIG_PASN=y
+
+# Device Provisioning Protocol (DPP) (also known as Wi-Fi Easy Connect)
+#CONFIG_DPP=y
+# DPP version 2 support
+#CONFIG_DPP2=y
+# DPP version 3 support (experimental and still changing; do not enable for
+# production use)
+#CONFIG_DPP3=y
+
# uBus IPC/RPC System
# Services can connect to the bus and provide methods
# that can be called by other services or clients.