--- a/nl80211.h
+++ b/nl80211.h
-@@ -1724,8 +1724,7 @@ enum nl80211_attrs {
- NL80211_ATTR_MDID,
- NL80211_ATTR_IE_RIC,
+@@ -27,6 +27,8 @@
-- NL80211_ATTR_CRIT_PROT_ID,
-- NL80211_ATTR_MAX_CRIT_PROT_DURATION,
-+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+ #include <linux/types.h>
+
++#define NL80211_GENL_NAME "nl80211"
++
+ /**
+ * DOC: Station handling
+ *
+@@ -1429,6 +1431,11 @@ enum nl80211_commands {
+ * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which
+ * the connection should have increased reliability (u16).
+ *
++ * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16).
++ * This is similar to @NL80211_ATTR_STA_AID but with a difference of being
++ * allowed to be used with the first @NL80211_CMD_SET_STATION command to
++ * update a TDLS peer STA entry.
++ *
+ * @NL80211_ATTR_MAX: highest attribute number currently defined
+ * @__NL80211_ATTR_AFTER_LAST: internal use
+ */
+@@ -1727,6 +1734,10 @@ enum nl80211_attrs {
+ NL80211_ATTR_CRIT_PROT_ID,
+ NL80211_ATTR_MAX_CRIT_PROT_DURATION,
++ NL80211_ATTR_PEER_AID,
++
++ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
++
/* add attributes here, update the policy in nl80211.c */
-@@ -1991,6 +1990,10 @@ enum nl80211_sta_bss_param {
+ __NL80211_ATTR_AFTER_LAST,
+@@ -1991,6 +2002,10 @@ enum nl80211_sta_bss_param {
* @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
* @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
* non-peer STA
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
-@@ -2020,6 +2023,8 @@ enum nl80211_sta_info {
+@@ -2020,6 +2035,8 @@ enum nl80211_sta_info {
NL80211_STA_INFO_NONPEER_PM,
NL80211_STA_INFO_RX_BYTES64,
NL80211_STA_INFO_TX_BYTES64,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
-@@ -2424,6 +2429,7 @@ enum nl80211_mntr_flags {
+@@ -2413,6 +2430,8 @@ enum nl80211_survey_info {
+ * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
+ * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
+ * overrides all other flags.
++ * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address
++ * and ACK incoming unicast packets.
+ *
+ * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
+ * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
+@@ -2424,6 +2443,7 @@ enum nl80211_mntr_flags {
NL80211_MNTR_FLAG_CONTROL,
NL80211_MNTR_FLAG_OTHER_BSS,
NL80211_MNTR_FLAG_COOK_FRAMES,
/* keep last */
__NL80211_MNTR_FLAG_AFTER_LAST,
+@@ -2559,6 +2579,10 @@ enum nl80211_mesh_power_mode {
+ *
+ * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)
+ *
++ * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
++ * established peering with for longer than this time (in seconds), then
++ * remove it from the STA's list of peers. Default is 30 minutes.
++ *
+ * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
+ */
+ enum nl80211_meshconf_params {
+@@ -2590,6 +2614,7 @@ enum nl80211_meshconf_params {
+ NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
+ NL80211_MESHCONF_POWER_MODE,
+ NL80211_MESHCONF_AWAKE_WINDOW,
++ NL80211_MESHCONF_PLINK_TIMEOUT,
+
+ /* keep last */
+ __NL80211_MESHCONF_ATTR_AFTER_LAST,
+@@ -2637,6 +2662,10 @@ enum nl80211_meshconf_params {
+ * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will
+ * implement an MPM which handles peer allocation and state.
+ *
++ * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication
++ * method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE).
++ * Default is no authentication method required.
++ *
+ * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+ *
+ * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
+@@ -2650,6 +2679,7 @@ enum nl80211_mesh_setup_params {
+ NL80211_MESH_SETUP_USERSPACE_AMPE,
+ NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
+ NL80211_MESH_SETUP_USERSPACE_MPM,
++ NL80211_MESH_SETUP_AUTH_PROTOCOL,
+
+ /* keep last */
+ __NL80211_MESH_SETUP_ATTR_AFTER_LAST,
+@@ -2730,6 +2760,8 @@ enum nl80211_channel_type {
+ * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well
+ * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
+ * attribute must be provided as well
++ * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel
++ * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel
+ */
+ enum nl80211_chan_width {
+ NL80211_CHAN_WIDTH_20_NOHT,
+@@ -2738,6 +2770,8 @@ enum nl80211_chan_width {
+ NL80211_CHAN_WIDTH_80,
+ NL80211_CHAN_WIDTH_80P80,
+ NL80211_CHAN_WIDTH_160,
++ NL80211_CHAN_WIDTH_5,
++ NL80211_CHAN_WIDTH_10,
+ };
+
+ /**
+@@ -3028,11 +3062,11 @@ enum nl80211_tx_power_setting {
+ };
+
+ /**
+- * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
+- * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
+- * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
++ * enum nl80211_packet_pattern_attr - packet pattern attribute
++ * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
++ * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
+ * a zero bit are ignored
+- * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
++ * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have
+ * a bit for each byte in the pattern. The lowest-order bit corresponds
+ * to the first byte of the pattern, but the bytes of the pattern are
+ * in a little-endian-like format, i.e. the 9th byte of the pattern
+@@ -3043,23 +3077,23 @@ enum nl80211_tx_power_setting {
+ * Note that the pattern matching is done as though frames were not
+ * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
+ * first (including SNAP header unpacking) and then matched.
+- * @NL80211_WOWLAN_PKTPAT_OFFSET: packet offset, pattern is matched after
++ * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after
+ * these fixed number of bytes of received packet
+- * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
+- * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
++ * @NUM_NL80211_PKTPAT: number of attributes
++ * @MAX_NL80211_PKTPAT: max attribute number
+ */
+-enum nl80211_wowlan_packet_pattern_attr {
+- __NL80211_WOWLAN_PKTPAT_INVALID,
+- NL80211_WOWLAN_PKTPAT_MASK,
+- NL80211_WOWLAN_PKTPAT_PATTERN,
+- NL80211_WOWLAN_PKTPAT_OFFSET,
++enum nl80211_packet_pattern_attr {
++ __NL80211_PKTPAT_INVALID,
++ NL80211_PKTPAT_MASK,
++ NL80211_PKTPAT_PATTERN,
++ NL80211_PKTPAT_OFFSET,
+
+- NUM_NL80211_WOWLAN_PKTPAT,
+- MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
++ NUM_NL80211_PKTPAT,
++ MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1,
+ };
+
+ /**
+- * struct nl80211_wowlan_pattern_support - pattern support information
++ * struct nl80211_pattern_support - packet pattern support information
+ * @max_patterns: maximum number of patterns supported
+ * @min_pattern_len: minimum length of each pattern
+ * @max_pattern_len: maximum length of each pattern
+@@ -3069,13 +3103,22 @@ enum nl80211_wowlan_packet_pattern_attr
+ * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
+ * capability information given by the kernel to userspace.
+ */
+-struct nl80211_wowlan_pattern_support {
++struct nl80211_pattern_support {
+ __u32 max_patterns;
+ __u32 min_pattern_len;
+ __u32 max_pattern_len;
+ __u32 max_pkt_offset;
+ } __attribute__((packed));
+
++/* only for backward compatibility */
++#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID
++#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK
++#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN
++#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET
++#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT
++#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT
++#define nl80211_wowlan_pattern_support nl80211_pattern_support
++
+ /**
+ * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
+ * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
+@@ -3095,7 +3138,7 @@ struct nl80211_wowlan_pattern_support {
+ * pattern matching is done after the packet is converted to the MSDU.
+ *
+ * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
+- * carrying a &struct nl80211_wowlan_pattern_support.
++ * carrying a &struct nl80211_pattern_support.
+ *
+ * When reporting wakeup. it is a u32 attribute containing the 0-based
+ * index of the pattern that caused the wakeup, in the patterns passed
+@@ -3252,7 +3295,7 @@ struct nl80211_wowlan_tcp_data_token_fea
+ * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a
+ * u32 attribute holding the maximum length
+ * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for
+- * feature advertising. The mask works like @NL80211_WOWLAN_PKTPAT_MASK
++ * feature advertising. The mask works like @NL80211_PKTPAT_MASK
+ * but on the TCP payload only.
+ * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes
+ * @MAX_NL80211_WOWLAN_TCP: highest attribute number
+@@ -3556,6 +3599,10 @@ enum nl80211_ap_sme_features {
+ * Peering Management entity which may be implemented by registering for
+ * beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is
+ * still generated by the driver.
++ * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor
++ * interface. An active monitor interface behaves like a normal monitor
++ * interface, but gets added to the driver. It ensures that incoming
++ * unicast packets directed at the configured interface address get ACKed.
+ */
+ enum nl80211_feature_flags {
+ NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
+@@ -3575,6 +3622,7 @@ enum nl80211_feature_flags {
+ NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14,
+ NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15,
+ NL80211_FEATURE_USERSPACE_MPM = 1 << 16,
++ NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17,
+ };
+
+ /**
projects / openwrt / staging / yousong.git / blobdiff