#!/bin/sh
-. /lib/functions.sh
-. ../netifd-proto.sh
-init_proto "$@"
+[ -n "$INCLUDE_ONLY" ] || {
+ . /lib/functions.sh
+ . ../netifd-proto.sh
+ init_proto "$@"
+}
proto_qmi_init_config() {
available=1
proto_config_add_string username
proto_config_add_string password
proto_config_add_string pincode
- proto_config_add_string delay
+ proto_config_add_int delay
proto_config_add_string modes
+ proto_config_add_string pdptype
+ proto_config_add_int profile
+ proto_config_add_boolean dhcpv6
+ proto_config_add_boolean autoconnect
+ proto_config_add_int plmn
+ proto_config_add_int timeout
+ proto_config_add_int mtu
+ proto_config_add_defaults
}
proto_qmi_setup() {
local interface="$1"
+ local dataformat connstat
+ local device apn auth username password pincode delay modes pdptype
+ local profile dhcpv6 autoconnect plmn timeout mtu $PROTO_DEFAULT_OPTIONS
+ local ip4table ip6table
+ local cid_4 pdh_4 cid_6 pdh_6
+ local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
- local device apn auth username password pincode delay modes cid pdh
json_get_vars device apn auth username password pincode delay modes
+ json_get_vars pdptype profile dhcpv6 autoconnect plmn ip4table
+ json_get_vars ip6table timeout mtu $PROTO_DEFAULT_OPTIONS
+
+ [ "$timeout" = "" ] && timeout="10"
+
+ [ "$metric" = "" ] && metric="0"
+
+ [ -n "$ctl_device" ] && device=$ctl_device
[ -n "$device" ] || {
echo "No control device specified"
proto_notify_error "$interface" NO_DEVICE
- proto_block_restart "$interface"
+ proto_set_available "$interface" 0
return 1
}
+
+ [ -n "$delay" ] && sleep "$delay"
+
+ device="$(readlink -f $device)"
[ -c "$device" ] || {
echo "The specified control device does not exist"
proto_notify_error "$interface" NO_DEVICE
- proto_block_restart "$interface"
+ proto_set_available "$interface" 0
return 1
}
[ -n "$ifname" ] || {
echo "The interface could not be found."
proto_notify_error "$interface" NO_IFACE
- proto_block_restart "$interface"
+ proto_set_available "$interface" 0
return 1
}
- [ -n "$delay" ] && sleep "$delay"
+ [ -n "$mtu" ] && {
+ echo "Setting MTU to $mtu"
+ /sbin/ip link set dev $ifname mtu $mtu
+ }
+ echo "Waiting for SIM initialization"
+ local uninitialized_timeout=0
while uqmi -s -d "$device" --get-pin-status | grep '"UIM uninitialized"' > /dev/null; do
- sleep 1;
+ [ -e "$device" ] || return 1
+ if [ "$uninitialized_timeout" -lt "$timeout" ]; then
+ let uninitialized_timeout++
+ sleep 1;
+ else
+ echo "SIM not initialized"
+ proto_notify_error "$interface" SIM_NOT_INITIALIZED
+ proto_block_restart "$interface"
+ return 1
+ fi
done
- [ -n "$pincode" ] && {
- uqmi -s -d "$device" --verify-pin1 "$pincode" || {
- echo "Unable to verify PIN"
- proto_notify_error "$interface" PIN_FAILED
+ if uqmi -s -d "$device" --get-pin-status | grep '"Not supported"\|"Invalid QMI command"' > /dev/null; then
+ [ -n "$pincode" ] && {
+ uqmi -s -d "$device" --verify-pin1 "$pincode" > /dev/null || uqmi -s -d "$device" --uim-verify-pin1 "$pincode" > /dev/null || {
+ echo "Unable to verify PIN"
+ proto_notify_error "$interface" PIN_FAILED
+ proto_block_restart "$interface"
+ return 1
+ }
+ }
+ else
+ . /usr/share/libubox/jshn.sh
+ json_load "$(uqmi -s -d "$device" --get-pin-status)"
+ json_get_var pin1_status pin1_status
+ json_get_var pin1_verify_tries pin1_verify_tries
+
+ case "$pin1_status" in
+ disabled)
+ echo "PIN verification is disabled"
+ ;;
+ blocked)
+ echo "SIM locked PUK required"
+ proto_notify_error "$interface" PUK_NEEDED
+ proto_block_restart "$interface"
+ return 1
+ ;;
+ not_verified)
+ [ "$pin1_verify_tries" -lt "3" ] && {
+ echo "PIN verify count value is $pin1_verify_tries this is below the limit of 3"
+ proto_notify_error "$interface" PIN_TRIES_BELOW_LIMIT
+ proto_block_restart "$interface"
+ return 1
+ }
+ if [ -n "$pincode" ]; then
+ uqmi -s -d "$device" --verify-pin1 "$pincode" > /dev/null 2>&1 || uqmi -s -d "$device" --uim-verify-pin1 "$pincode" > /dev/null 2>&1 || {
+ echo "Unable to verify PIN"
+ proto_notify_error "$interface" PIN_FAILED
+ proto_block_restart "$interface"
+ return 1
+ }
+ else
+ echo "PIN not specified but required"
+ proto_notify_error "$interface" PIN_NOT_SPECIFIED
+ proto_block_restart "$interface"
+ return 1
+ fi
+ ;;
+ verified)
+ echo "PIN already verified"
+ ;;
+ *)
+ echo "PIN status failed ($pin1_status)"
+ proto_notify_error "$interface" PIN_STATUS_FAILED
+ proto_block_restart "$interface"
+ return 1
+ ;;
+ esac
+ fi
+
+ [ -n "$plmn" ] && {
+ local mcc mnc
+ if [ "$plmn" = 0 ]; then
+ mcc=0
+ mnc=0
+ echo "Setting PLMN to auto"
+ else
+ mcc=${plmn:0:3}
+ mnc=${plmn:3}
+ echo "Setting PLMN to $plmn"
+ fi
+ uqmi -s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" > /dev/null 2>&1 || {
+ echo "Unable to set PLMN"
+ proto_notify_error "$interface" PLMN_FAILED
proto_block_restart "$interface"
return 1
}
}
- [ -n "$apn" ] || {
- echo "No APN specified"
- proto_notify_error "$interface" NO_APN
- proto_block_restart "$interface"
- return 1
- }
+ # Cleanup current state if any
+ uqmi -s -d "$device" --stop-network 0xffffffff --autoconnect > /dev/null 2>&1
+
+ # Set IP format
+ uqmi -s -d "$device" --set-data-format 802.3 > /dev/null 2>&1
+ uqmi -s -d "$device" --wda-set-data-format 802.3 > /dev/null 2>&1
+ dataformat="$(uqmi -s -d "$device" --wda-get-data-format)"
+
+ if [ "$dataformat" = '"raw-ip"' ]; then
+
+ [ -f /sys/class/net/$ifname/qmi/raw_ip ] || {
+ echo "Device only supports raw-ip mode but is missing this required driver attribute: /sys/class/net/$ifname/qmi/raw_ip"
+ return 1
+ }
+
+ echo "Device does not support 802.3 mode. Informing driver of raw-ip only for $ifname .."
+ echo "Y" > /sys/class/net/$ifname/qmi/raw_ip
+ fi
+
+ uqmi -s -d "$device" --sync > /dev/null 2>&1
echo "Waiting for network registration"
+ local registration_timeout=0
while uqmi -s -d "$device" --get-serving-system | grep '"searching"' > /dev/null; do
- sleep 5;
+ [ -e "$device" ] || return 1
+ if [ "$registration_timeout" -lt "$timeout" ]; then
+ let registration_timeout++
+ sleep 1;
+ else
+ echo "Network registration failed"
+ proto_notify_error "$interface" NETWORK_REGISTRATION_FAILED
+ proto_block_restart "$interface"
+ return 1
+ fi
done
- [ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes"
+ [ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes" > /dev/null 2>&1
- echo "Starting network $apn"
- cid=`uqmi -s -d "$device" --get-client-id wds`
- [ $? -ne 0 ] && {
- echo "Unable to obtain client ID"
- proto_notify_error "$interface" NO_CID
- proto_block_restart "$interface"
- return 1
- }
- uci_set_state network $interface cid "$cid"
-
- pdh=`uqmi -s -d "$device" --set-client-id wds,"$cid" --start-network "$apn" \
- ${auth:+--auth-type $auth} \
- ${username:+--username $username} \
- ${password:+--password $password}`
- [ $? -ne 0 ] && {
- echo "Unable to connect, check APN and authentication"
- proto_notify_error "$interface" NO_PDH
- proto_block_restart "$interface"
- return 1
- }
- uci_set_state network $interface pdh "$pdh"
+ echo "Starting network $interface"
- if ! uqmi -s -d "$device" --get-data-status | grep '"connected"' > /dev/null; then
- echo "Connection lost"
- proto_notify_error "$interface" NOT_CONNECTED
- proto_block_restart "$interface"
- return 1
+ pdptype=$(echo "$pdptype" | awk '{print tolower($0)}')
+ [ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype="ip"
+
+ if [ "$pdptype" = "ip" ]; then
+ [ -z "$autoconnect" ] && autoconnect=1
+ [ "$autoconnect" = 0 ] && autoconnect=""
+ else
+ [ "$autoconnect" = 1 ] || autoconnect=""
fi
- echo "Connected, starting DHCP"
+ [ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
+ cid_4=$(uqmi -s -d "$device" --get-client-id wds)
+ if ! [ "$cid_4" -eq "$cid_4" ] 2> /dev/null; then
+ echo "Unable to obtain client ID"
+ proto_notify_error "$interface" NO_CID
+ return 1
+ fi
+
+ uqmi -s -d "$device" --set-client-id wds,"$cid_4" --set-ip-family ipv4 > /dev/null 2>&1
+
+ pdh_4=$(uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
+ --start-network \
+ ${apn:+--apn $apn} \
+ ${profile:+--profile $profile} \
+ ${auth:+--auth-type $auth} \
+ ${username:+--username $username} \
+ ${password:+--password $password} \
+ ${autoconnect:+--autoconnect})
+
+ # pdh_4 is a numeric value on success
+ if ! [ "$pdh_4" -eq "$pdh_4" ] 2> /dev/null; then
+ echo "Unable to connect IPv4"
+ uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds > /dev/null 2>&1
+ proto_notify_error "$interface" CALL_FAILED
+ return 1
+ fi
+
+ # Check data connection state
+ connstat=$(uqmi -s -d "$device" --get-data-status)
+ [ "$connstat" == '"connected"' ] || {
+ echo "No data link!"
+ uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds > /dev/null 2>&1
+ proto_notify_error "$interface" CALL_FAILED
+ return 1
+ }
+ }
+
+ [ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
+ cid_6=$(uqmi -s -d "$device" --get-client-id wds)
+ if ! [ "$cid_6" -eq "$cid_6" ] 2> /dev/null; then
+ echo "Unable to obtain client ID"
+ proto_notify_error "$interface" NO_CID
+ return 1
+ fi
+
+ uqmi -s -d "$device" --set-client-id wds,"$cid_6" --set-ip-family ipv6 > /dev/null 2>&1
+
+ pdh_6=$(uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
+ --start-network \
+ ${apn:+--apn $apn} \
+ ${profile:+--profile $profile} \
+ ${auth:+--auth-type $auth} \
+ ${username:+--username $username} \
+ ${password:+--password $password} \
+ ${autoconnect:+--autoconnect})
+
+ # pdh_6 is a numeric value on success
+ if ! [ "$pdh_6" -eq "$pdh_6" ] 2> /dev/null; then
+ echo "Unable to connect IPv6"
+ uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds > /dev/null 2>&1
+ proto_notify_error "$interface" CALL_FAILED
+ return 1
+ fi
+
+ # Check data connection state
+ connstat=$(uqmi -s -d "$device" --get-data-status)
+ [ "$connstat" == '"connected"' ] || {
+ echo "No data link!"
+ uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds > /dev/null 2>&1
+ proto_notify_error "$interface" CALL_FAILED
+ return 1
+ }
+ }
+
+ echo "Setting up $ifname"
proto_init_update "$ifname" 1
+ proto_set_keep 1
+ proto_add_data
+ [ -n "$pdh_4" ] && {
+ json_add_string "cid_4" "$cid_4"
+ json_add_string "pdh_4" "$pdh_4"
+ }
+ [ -n "$pdh_6" ] && {
+ json_add_string "cid_6" "$cid_6"
+ json_add_string "pdh_6" "$pdh_6"
+ }
+ proto_close_data
proto_send_update "$interface"
- json_init
- json_add_string name "${interface}_dhcp"
- json_add_string ifname "@$interface"
- json_add_string proto "dhcp"
- json_close_object
- ubus call network add_dynamic "$(json_dump)"
-
- json_init
- json_add_string name "${interface}_dhcpv6"
- json_add_string ifname "@$interface"
- json_add_string proto "dhcpv6"
- json_close_object
- ubus call network add_dynamic "$(json_dump)"
+ local zone="$(fw3 -q network "$interface" 2>/dev/null)"
+
+ [ -n "$pdh_6" ] && {
+ if [ -z "$dhcpv6" -o "$dhcpv6" = 0 ]; then
+ json_load "$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)"
+ json_select ipv6
+ json_get_var ip_6 ip
+ json_get_var gateway_6 gateway
+ json_get_var dns1_6 dns1
+ json_get_var dns2_6 dns2
+ json_get_var ip_prefix_length ip-prefix-length
+
+ proto_init_update "$ifname" 1
+ proto_set_keep 1
+ proto_add_ipv6_address "$ip_6" "128"
+ proto_add_ipv6_prefix "${ip_6}/${ip_prefix_length}"
+ proto_add_ipv6_route "$gateway_6" "128"
+ [ "$defaultroute" = 0 ] || proto_add_ipv6_route "::0" 0 "$gateway_6" "" "" "${ip_6}/${ip_prefix_length}"
+ [ "$peerdns" = 0 ] || {
+ proto_add_dns_server "$dns1_6"
+ proto_add_dns_server "$dns2_6"
+ }
+ [ -n "$zone" ] && {
+ proto_add_data
+ json_add_string zone "$zone"
+ proto_close_data
+ }
+ proto_send_update "$interface"
+ else
+ json_init
+ json_add_string name "${interface}_6"
+ json_add_string ifname "@$interface"
+ json_add_string proto "dhcpv6"
+ [ -n "$ip6table" ] && json_add_string ip6table "$ip6table"
+ proto_add_dynamic_defaults
+ # RFC 7278: Extend an IPv6 /64 Prefix to LAN
+ json_add_string extendprefix 1
+ [ -n "$zone" ] && json_add_string zone "$zone"
+ json_close_object
+ ubus call network add_dynamic "$(json_dump)"
+ fi
+ }
+
+ [ -n "$pdh_4" ] && {
+ json_init
+ json_add_string name "${interface}_4"
+ json_add_string ifname "@$interface"
+ json_add_string proto "dhcp"
+ [ -n "$ip4table" ] && json_add_string ip4table "$ip4table"
+ proto_add_dynamic_defaults
+ [ -n "$zone" ] && json_add_string zone "$zone"
+ json_close_object
+ ubus call network add_dynamic "$(json_dump)"
+ }
+}
+
+qmi_wds_stop() {
+ local cid="$1"
+ local pdh="$2"
+
+ [ -n "$cid" ] || return
+
+ uqmi -s -d "$device" --set-client-id wds,"$cid" \
+ --stop-network 0xffffffff \
+ --autoconnect > /dev/null 2>&1
+
+ [ -n "$pdh" ] && {
+ uqmi -s -d "$device" --set-client-id wds,"$cid" \
+ --stop-network "$pdh" > /dev/null 2>&1
+ }
+
+ uqmi -s -d "$device" --set-client-id wds,"$cid" \
+ --release-client-id wds > /dev/null 2>&1
}
proto_qmi_teardown() {
local interface="$1"
- local device
+ local device cid_4 pdh_4 cid_6 pdh_6
json_get_vars device
- local cid=$(uci_get_state network $interface cid)
- local pdh=$(uci_get_state network $interface pdh)
-
- echo "Stopping network"
- [ -n "$cid" ] && {
- [ -n "$pdh" ] && {
- uqmi -s -d "$device" --set-client-id wds,"$cid" --stop-network "$pdh"
- uci_revert_state network $interface pdh
- }
- uqmi -s -d "$device" --set-client-id wds,"$cid" --release-client-id wds
- uci_revert_state network $interface cid
- }
+
+ [ -n "$ctl_device" ] && device=$ctl_device
+
+ echo "Stopping network $interface"
+
+ json_load "$(ubus call network.interface.$interface status)"
+ json_select data
+ json_get_vars cid_4 pdh_4 cid_6 pdh_6
+
+ qmi_wds_stop "$cid_4" "$pdh_4"
+ qmi_wds_stop "$cid_6" "$pdh_6"
proto_init_update "*" 0
proto_send_update "$interface"
}
-add_protocol qmi
-
+[ -n "$INCLUDE_ONLY" ] || {
+ add_protocol qmi
+}