proto_config_add_boolean autoconnect
proto_config_add_int plmn
proto_config_add_int timeout
+ proto_config_add_int mtu
proto_config_add_defaults
}
proto_qmi_setup() {
local interface="$1"
local dataformat connstat
- local device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn timeout $PROTO_DEFAULT_OPTIONS
+ local device apn auth username password pincode delay modes pdptype
+ local profile dhcpv6 autoconnect plmn timeout mtu $PROTO_DEFAULT_OPTIONS
local ip4table ip6table
local cid_4 pdh_4 cid_6 pdh_6
local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
- json_get_vars device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn ip4table ip6table timeout $PROTO_DEFAULT_OPTIONS
+
+ json_get_vars device apn auth username password pincode delay modes
+ json_get_vars pdptype profile dhcpv6 autoconnect plmn ip4table
+ json_get_vars ip6table timeout mtu $PROTO_DEFAULT_OPTIONS
[ "$timeout" = "" ] && timeout="10"
return 1
}
+ [ -n "$mtu" ] && {
+ echo "Setting MTU to $mtu"
+ /sbin/ip link set dev $ifname mtu $mtu
+ }
+
+ echo "Waiting for SIM initialization"
+ local uninitialized_timeout=0
while uqmi -s -d "$device" --get-pin-status | grep '"UIM uninitialized"' > /dev/null; do
[ -e "$device" ] || return 1
- sleep 1;
- done
-
- [ -n "$pincode" ] && {
- uqmi -s -d "$device" --verify-pin1 "$pincode" > /dev/null || uqmi -s -d "$device" --uim-verify-pin1 "$pincode" > /dev/null || {
- echo "Unable to verify PIN"
- proto_notify_error "$interface" PIN_FAILED
+ if [ "$uninitialized_timeout" -lt "$timeout" ]; then
+ let uninitialized_timeout++
+ sleep 1;
+ else
+ echo "SIM not initialized"
+ proto_notify_error "$interface" SIM_NOT_INITIALIZED
proto_block_restart "$interface"
return 1
+ fi
+ done
+
+ if uqmi -s -d "$device" --get-pin-status | grep '"Not supported"\|"Invalid QMI command"' > /dev/null; then
+ [ -n "$pincode" ] && {
+ uqmi -s -d "$device" --verify-pin1 "$pincode" > /dev/null || uqmi -s -d "$device" --uim-verify-pin1 "$pincode" > /dev/null || {
+ echo "Unable to verify PIN"
+ proto_notify_error "$interface" PIN_FAILED
+ proto_block_restart "$interface"
+ return 1
+ }
}
- }
+ else
+ . /usr/share/libubox/jshn.sh
+ json_load "$(uqmi -s -d "$device" --get-pin-status)"
+ json_get_var pin1_status pin1_status
+ json_get_var pin1_verify_tries pin1_verify_tries
+
+ case "$pin1_status" in
+ disabled)
+ echo "PIN verification is disabled"
+ ;;
+ blocked)
+ echo "SIM locked PUK required"
+ proto_notify_error "$interface" PUK_NEEDED
+ proto_block_restart "$interface"
+ return 1
+ ;;
+ not_verified)
+ [ "$pin1_verify_tries" -lt "3" ] && {
+ echo "PIN verify count value is $pin1_verify_tries this is below the limit of 3"
+ proto_notify_error "$interface" PIN_TRIES_BELOW_LIMIT
+ proto_block_restart "$interface"
+ return 1
+ }
+ if [ -n "$pincode" ]; then
+ uqmi -s -d "$device" --verify-pin1 "$pincode" > /dev/null 2>&1 || uqmi -s -d "$device" --uim-verify-pin1 "$pincode" > /dev/null 2>&1 || {
+ echo "Unable to verify PIN"
+ proto_notify_error "$interface" PIN_FAILED
+ proto_block_restart "$interface"
+ return 1
+ }
+ else
+ echo "PIN not specified but required"
+ proto_notify_error "$interface" PIN_NOT_SPECIFIED
+ proto_block_restart "$interface"
+ return 1
+ fi
+ ;;
+ verified)
+ echo "PIN already verified"
+ ;;
+ *)
+ echo "PIN status failed ($pin1_status)"
+ proto_notify_error "$interface" PIN_STATUS_FAILED
+ proto_block_restart "$interface"
+ return 1
+ ;;
+ esac
+ fi
[ -n "$plmn" ] && {
local mcc mnc
}
proto_close_data
proto_send_update "$interface"
+
+ local zone="$(fw3 -q network "$interface" 2>/dev/null)"
+
[ -n "$pdh_6" ] && {
if [ -z "$dhcpv6" -o "$dhcpv6" = 0 ]; then
json_load "$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)"
proto_add_dns_server "$dns1_6"
proto_add_dns_server "$dns2_6"
}
+ [ -n "$zone" ] && {
+ proto_add_data
+ json_add_string zone "$zone"
+ proto_close_data
+ }
proto_send_update "$interface"
else
json_init
proto_add_dynamic_defaults
# RFC 7278: Extend an IPv6 /64 Prefix to LAN
json_add_string extendprefix 1
+ [ -n "$zone" ] && json_add_string zone "$zone"
json_close_object
ubus call network add_dynamic "$(json_dump)"
fi
json_add_string proto "dhcp"
[ -n "$ip4table" ] && json_add_string ip4table "$ip4table"
proto_add_dynamic_defaults
+ [ -n "$zone" ] && json_add_string zone "$zone"
json_close_object
ubus call network add_dynamic "$(json_dump)"
}