"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2011-07-17 10:01+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
+"PO-Revision-Date: 2012-02-25 08:06+0200\n"
+"Last-Translator: Cye3s <cye3s.cy@gmail.com>\n"
"Language-Team: QQ Group 75543259 <axishero@foxmail.com>\n"
+"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-"Language: zh_CN\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Pootle 2.0.4\n"
+msgid "%s in %s"
+msgstr ""
+
+msgid "%s%s with %s"
+msgstr ""
+
+msgid "%s, %s in %s"
+msgstr ""
+
msgid "(Unnamed Entry)"
msgstr ""
-msgid "(Unnamed SNAT)"
+msgid "(Unnamed Rule)"
msgstr ""
-msgid "(optional)"
-msgstr "(可选)"
+msgid "(Unnamed SNAT)"
+msgstr ""
msgid "-- Please choose --"
msgstr ""
msgid "-- custom --"
msgstr ""
+msgid "<var>%d</var> pkts. per <var>%s</var>"
+msgstr ""
+
+msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
+msgstr ""
+
+msgid "<var>%s</var> and limit to %s"
+msgstr ""
+
msgid "Action"
msgstr "动作"
msgid "Add and edit..."
msgstr ""
-msgid "Advanced Options"
-msgstr "高级选项"
-
-msgid "Advanced Rules"
-msgstr "高级规则"
-
msgid "Advanced Settings"
msgstr "高级设置"
-msgid ""
-"Advanced rules let you customize the firewall to your needs. Only new "
-"connections will be matched. Packets belonging to already open connections "
-"are automatically allowed to pass the firewall."
-msgstr ""
-"高级规则允许按需定制防火墙。此规则只限制新建立的连接,对于已建立链路的数据包"
-"会自动允许通过。"
-
msgid "Allow forward from <em>source zones</em>:"
msgstr "允许从<em>source zones</em>转发"
msgid "Custom Rules"
msgstr "自定义规则"
-msgid "Custom Rules (/etc/firewall.user)"
-msgstr "自定义规则(/etc/firewall.user)"
-
msgid ""
"Custom rules allow you to execute arbritary iptables commands which are not "
"otherwise covered by the firewall framework. The commands are executed after "
"each firewall restart, right after the default ruleset has been loaded."
msgstr ""
-msgid "Destination"
-msgstr "目标"
-
msgid "Destination IP address"
-msgstr ""
+msgstr "目标IP地址"
msgid "Destination address"
msgstr "目标地址"
msgid "Destination zone"
msgstr "目标区域"
-msgid "Device"
-msgstr "设备"
-
msgid "Do not rewrite"
msgstr ""
msgid "Drop invalid packets"
msgstr "丢弃无效数据包"
+msgid "Enable"
+msgstr "启用"
+
msgid "Enable NAT Loopback"
msgstr "启用NAT环回"
msgid "Enable logging on this zone"
msgstr "在此区域允许进入"
+msgid "External IP address"
+msgstr "外部IP地址"
+
msgid "External port"
msgstr "外部端口"
-msgid "Family"
-msgstr "地址集合"
+msgid "Extra arguments"
+msgstr "附加参数"
msgid "Firewall"
msgstr "防火墙"
msgid "Firewall - Custom Rules"
-msgstr ""
+msgstr "防火墙 - 自定义规则"
msgid "Firewall - Port Forwards"
-msgstr ""
+msgstr "防火墙 - 端口转发"
msgid "Firewall - Traffic Rules"
-msgstr ""
+msgstr "防火墙 - 通讯规则"
msgid "Firewall - Zone Settings"
msgstr "防火墙-区域设置"
-msgid ""
-"For DNAT, match incoming traffic directed at the given destination ip "
-"address. For SNAT rewrite the source address to the given address."
-msgstr "DNAT:将目标地址转换为指定的IP地址;SNAT:将源地址转换为指定的IP地址。"
-
msgid "Force connection tracking"
msgstr "强制连接追踪"
msgid "Forward"
msgstr "转发"
+msgid "Forward to"
+msgstr ""
+
+msgid "From %s in %s"
+msgstr "来自 %s 位于 %s"
+
+msgid "From %s in %s with source %s"
+msgstr "来自 %s 位于 %s 带源 %s"
+
+msgid "From %s in %s with source %s and %s"
+msgstr "来自 %s 位于 %s 带源 %s 并且 %s"
+
msgid "General Settings"
msgstr "标准设置"
msgid "IPv4"
-msgstr ""
+msgstr "IPv4"
msgid "IPv4 and IPv6"
msgstr "IPv4 和 IPv6"
msgstr "仅IPv4"
msgid "IPv6"
-msgstr ""
+msgstr "IPv6"
msgid "IPv6 only"
-msgstr "仅IPv6 "
+msgstr "仅IPv6"
msgid "Input"
msgstr "入(路由器)"
-msgid "Intended destination address"
-msgstr "目标地址"
-
msgid "Inter-Zone Forwarding"
msgstr "端口触发"
msgid "Internal port"
msgstr "内部端口"
-msgid "Internal port (optional)"
-msgstr "内部端口(可选)"
+msgid "Internal zone"
+msgstr "内部区域"
msgid "Limit log messages"
msgstr "限制登陆信息"
msgid "Masquerading"
msgstr "IP动态伪装"
+msgid "Match"
+msgstr ""
+
msgid "Match ICMP type"
msgstr "匹配ICMP类型"
"on this host"
msgstr "在这个主机上,匹配输入的信息指向给定的端口或者范围"
-msgid ""
-"Match incoming traffic originating from the given source port or port range "
-"on the client host"
-msgstr "在客户端上,比较输入通道与给定的源端口是否一致。"
-
msgid ""
"Match incoming traffic originating from the given source port or port range "
"on the client host."
msgstr "名字"
msgid "New SNAT rule"
-msgstr ""
+msgstr "新建SNAT规则"
msgid "New forward rule"
-msgstr ""
+msgstr "新建转发规则"
msgid "New input rule"
-msgstr ""
+msgstr "新建进入规则"
msgid "New port forward"
-msgstr ""
+msgstr "新建端口转发"
msgid "New source NAT"
-msgstr ""
+msgstr "新建源NAT"
msgid "Only match incoming traffic directed at the given IP address."
msgstr ""
msgstr ""
msgid "Other..."
-msgstr ""
+msgstr "其它..."
msgid "Output"
msgstr "出(路由器)"
-msgid "Overview"
-msgstr "概览"
-
-msgid "Port Forwards"
+msgid "Passes additional arguments to iptables. Use with care!"
msgstr ""
-msgid "Port forwarding"
+msgid "Port Forwards"
msgstr "端口转发"
msgid ""
"specific computer or service within the private LAN."
msgstr ""
-msgid ""
-"Port forwarding allows to provide network services in the internal network "
-"to an external network."
-msgstr "端口转发-允许外部网络访问内部网络"
-
msgid "Protocol"
msgstr "协议"
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "重定向匹配到的入站流量至选定的内部主机"
-msgid "Redirection type"
-msgstr "重定向类型"
-
-msgid "Redirections"
-msgstr "重定向"
-
msgid "Restrict Masquerading to given destination subnets"
msgstr "限制访问指定的目标子网"
"rewrite the IP address."
msgstr ""
-msgid "Rules"
-msgstr "规则"
+msgid "Rewrite to source %s"
+msgstr ""
-msgid "SNAT"
+msgid "Rewrite to source %s, %s"
msgstr ""
msgid "SNAT IP address"
msgid "SNAT port"
msgstr ""
-msgid "Source"
-msgstr "源"
-
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# Generated from applications/luci-fw/luasrc/model/cbi/luci_fw/rrule.lua #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
msgid ""
"The firewall creates zones over your network interfaces to control network "
"traffic flow."
-msgstr "防火墙把网络接口分为不同的区域进行管理 "
+msgstr "防火墙把网络接口分为不同的区域进行管理"
msgid ""
"The options below control the forwarding policies between this zone (%s) and "
"(一个或多个)区域的不同子网之间的数据包转发而<em>Covered networks</em>是从属"
"于这个区域的一个网络地址集合。"
-msgid "To source IP"
+msgid "To %s at %s on <var>this device</var>"
msgstr ""
-msgid "To source port"
+msgid "To %s in %s"
msgstr ""
-msgid "Traffic Redirection"
-msgstr "流量重定向"
+msgid "To %s on <var>this device</var>"
+msgstr ""
-msgid "Traffic Rules"
+msgid "To %s, %s in %s"
msgstr ""
-msgid ""
-"Traffic redirection allows you to change the destination address of "
-"forwarded packets."
-msgstr "流量重定向允许你修改数据包转发地址"
+msgid "To source IP"
+msgstr ""
+
+msgid "To source port"
+msgstr ""
+
+msgid "Traffic Rules"
+msgstr "通信规则"
msgid ""
"Traffic rules define policies for packets traveling between different zones, "
"the router."
msgstr ""
-msgid "Via"
-msgstr "通过"
+msgid "Via %s"
+msgstr ""
+
+msgid "Via %s at %s"
+msgstr ""
msgid ""
"You may specify multiple by selecting \"-- custom --\" and then entering "
msgid "any"
msgstr "任何"
+msgid "any host"
+msgstr ""
+
+msgid "any router IP"
+msgstr ""
+
+msgid "any zone"
+msgstr ""
+
msgid "don't track"
msgstr ""
msgid "reject"
msgstr "拒绝"
+#~ msgid "Destination"
+#~ msgstr "目标"
+
+#~ msgid "Family"
+#~ msgstr "地址集合"
+
+#~ msgid "Forward to %s in %s"
+#~ msgstr "转发到 %s 位于 %s"
+
+#~ msgid "Forward to %s, %s in %s"
+#~ msgstr "转发到 %s, %s 位于 %s"
+
+#~ msgid "Source"
+#~ msgstr "源"
+
+#~ msgid "Via"
+#~ msgstr "通过"
+
+#~ msgid "Disable"
+#~ msgstr "禁用"
+
+#~ msgid "Do not track forward"
+#~ msgstr "不要追踪转发"
+
+#~ msgid "Do not track input"
+#~ msgstr "不要追踪进入"
+
+#~ msgid "IP"
+#~ msgstr "IP"
+
+#~ msgid "IP range"
+#~ msgstr "IP范围"
+
+#~ msgid "(optional)"
+#~ msgstr "(可选)"
+
+#~ msgid "Intended destination address"
+#~ msgstr "目标地址"
+
+#~ msgid "Internal port (optional)"
+#~ msgstr "内部端口(可选)"
+
+#~ msgid "Advanced Options"
+#~ msgstr "高级选项"
+
+#~ msgid "Advanced Rules"
+#~ msgstr "高级规则"
+
+#~ msgid ""
+#~ "Advanced rules let you customize the firewall to your needs. Only new "
+#~ "connections will be matched. Packets belonging to already open "
+#~ "connections are automatically allowed to pass the firewall."
+#~ msgstr ""
+#~ "高级规则允许按需定制防火墙。此规则只限制新建立的连接,对于已建立链路的数据"
+#~ "包会自动允许通过。"
+
+#~ msgid "Custom Rules (/etc/firewall.user)"
+#~ msgstr "自定义规则(/etc/firewall.user)"
+
+#~ msgid "Device"
+#~ msgstr "设备"
+
+#~ msgid ""
+#~ "For DNAT, match incoming traffic directed at the given destination ip "
+#~ "address. For SNAT rewrite the source address to the given address."
+#~ msgstr ""
+#~ "DNAT:将目标地址转换为指定的IP地址;SNAT:将源地址转换为指定的IP地址。"
+
+#~ msgid ""
+#~ "Match incoming traffic originating from the given source port or port "
+#~ "range on the client host"
+#~ msgstr "在客户端上,比较输入通道与给定的源端口是否一致。"
+
+#~ msgid "Overview"
+#~ msgstr "概览"
+
+#~ msgid "Port forwarding"
+#~ msgstr "端口转发"
+
+#~ msgid ""
+#~ "Port forwarding allows to provide network services in the internal "
+#~ "network to an external network."
+#~ msgstr "端口转发-允许外部网络访问内部网络"
+
+#~ msgid "Redirection type"
+#~ msgstr "重定向类型"
+
+#~ msgid "Redirections"
+#~ msgstr "重定向"
+
+#~ msgid "Rules"
+#~ msgstr "规则"
+
+#~ msgid "Traffic Redirection"
+#~ msgstr "流量重定向"
+
+#~ msgid ""
+#~ "Traffic redirection allows you to change the destination address of "
+#~ "forwarded packets."
+#~ msgstr "流量重定向允许你修改数据包转发地址"
+
#~ msgid "Zone"
#~ msgstr "区"