+// SPDX-License-Identifier: GPL-2.0-only
/*
* Device Tree Source for Netgear WNDR4700/WNDR4720 Series
*
* Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
*/
/dts-v1/;
-#include "apm82181.dtsi"
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/leds/common.h>
+#include "apm82181.dtsi"
/ {
model = "Netgear WNDR4700/WNDR4720 Series";
- compatible = "netgear,wndr4700";
+ compatible = "netgear,wndr4700", "apm,bluestone";
aliases {
serial0 = &UART0;
- led-boot = &status;
- led-failsafe = &failsafe;
- led-running = &status;
- led-upgrade = &status;
};
chosen {
thermal-sensors = <&temp0 1>;
+ /*
+ * REVISIT:
+ *
+ * Add the <&drive_temp>; sensor there and wire up
+ * the coefficients = <1 1>; property.
+ *
+ * Note: The kernel does not yet support more than
+ * one sensor (see of_thermal.c's function:
+ * thermal_of_build_thermal_zon()). Once this is
+ * implemented.
+ */
+
trips {
/*
* Once the thermal governers are a bit smarter
* and do hysteresis properly, we can disable
* the fan when the HDD and CPU has < 39 C.
*/
- cpu_alert0: cpu-alert0 {
+ cpu_alert0: board-alert0 {
temperature = <25000>;
hysteresis = <2000>;
type = "active";
};
cpu_alert6: cpu-alert6 {
- temperature = <850000>; /* millicelsius */
+ temperature = <85000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "active";
};
map1 {
trip = <&cpu_alert1>;
- cooling-device = <&fan0 1 76>;
+ cooling-device = <&fan0 1 1>;
};
map2 {
trip = <&cpu_alert2>;
- cooling-device = <&fan0 77 101>;
+ cooling-device = <&fan0 2 4>;
};
map3 {
trip = <&cpu_alert3>;
- cooling-device = <&fan0 102 147>;
+ cooling-device = <&fan0 4 8>;
};
map4 {
trip = <&cpu_alert4>;
- cooling-device = <&fan0 148 207>;
+ cooling-device = <&fan0 9 12>;
};
map5 {
trip = <&cpu_alert5>;
- cooling-device = <&fan0 208 231>;
+ cooling-device = <&fan0 13 15>;
};
map6 {
trip = <&cpu_alert6>;
- cooling-device =<&fan0 232 THERMAL_NO_LIMIT>;
+ cooling-device =<&fan0 16 THERMAL_NO_LIMIT>;
};
};
};
&SATA1 {
status = "okay";
+
+ /*
+ * This drive may have a temperature sensor with a
+ * thermal zone we can use for thermal control of the
+ * chassis temperature using the fan.
+ */
+
+ drive_temp: sata-port@0 {
+ reg = <0>;
+ #thermal-sensor-cells = <0>;
+ };
};
&USBOTG0 {
dr_mode = "host";
};
-&EBC0 {
- ndfc@1,0 {
- status = "okay";
- /* 128 MiB Nand Flash */
- nand {
+&ndfc {
+ status = "okay";
+ /* 128 MiB Nand Flash */
+ nand {
+ nand-is-boot-medium;
+
+ partitions {
+ compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
- partition0,0@0 {
- label = "NAND 128MiB 3,3V 8-bit";
- reg = <0x00000000 0x08000000>;
- read-only;
- };
-
- partition0,1@0 {
+ partition@0 {
label = "uboot";
reg = <0x00000000 0x00180000>;
read-only;
};
- partition0,2@180000 {
- label = "device-tree";
- reg = <0x00180000 0x00020000>;
- };
+ partition@180000 {
+ label = "firmware";
+ reg = <0x00180000 0x01860000>;
- partition0,3@180000 {
- label = "kernel";
- reg = <0x00180000 0x00380000>;
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x00380000>;
+
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * device-tree is @ 0x00180000 - 0x0019ffff
+ * kernel starts from 0x20000.
+ * this is coded into netgear's u-boot.
+ */
+ partition@0 {
+ label = "dtb";
+ reg = <0x00000000 0x20000>;
+ };
/*
- * device-tree is @ 0x00180000 - 0x001fffff
- * kernel starts from 0x200000.
- * this is coded into netgear's u-boot.
- *
* this partition will also contain a
* fake/empty rootfs at the end to fool
* Netgear's uboot rootfs integrety checks.
*/
- };
+ };
- partition0,4@500000 {
- label = "ubi";
- reg = <0x00500000 0x014e0000>;
+ partition@380000 {
+ label = "ubi";
+ reg = <0x00380000 0x014e0000>;
+ };
};
- partition0,5@19e0000 {
+
+ /*
+ * Netgear's u-boot in the fw_recovery mode (can be
+ * triggered by holding the reset button, or if
+ * "bootm" fails) will not flash past this point
+ * (= 0x19E0000).
+ */
+
+ partition@19e0000 {
label = "config";
reg = <0x019e0000 0x00080000>;
read-only;
};
- partition0,6@1a60000 {
+ partition@1a60000 {
label = "pot";
reg = <0x01a60000 0x00080000>;
read-only;
};
- partition0,7@1ae0000 {
+ partition@1ae0000 {
label = "traffic_meter";
reg = <0x01ae0000 0x00300000>;
read-only;
};
- partition0,8@1de0000 {
+ partition@1de0000 {
label = "language";
reg = <0x01de0000 0x001c0000>;
read-only;
};
- partition0,9@1fa0000 {
+ partition@1fa0000 {
label = "ecos";
reg = <0x01fa0000 0x06020000>;
read-only;
};
- partition0,10@7fc0000 {
+ partition@7fc0000 {
label = "wifi_data";
reg = <0x07fc0000 0x00040000>;
read-only;
- };
- partition0,11@180000 {
- label = "firmware";
- reg = <0x00180000 0x01860000>;
- read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_wifi_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+ macaddr_wifi_c: macaddr@c {
+ reg = <0xc 0x6>;
+ };
+
+ calibration_wifi_1000: calibration@1000 {
+ reg = <0x1000 0x440>;
+ };
+
+ calibration_wifi_5000: calibration@5000 {
+ reg = <0x5000 0x440>;
+ };
};
};
};
&GPIO0 {
status = "okay";
- #interrupt-cells = <2>;
- interrupt-controller;
- interrupts-extended = <&UIC1 0x14>,
- <&UIC1 0x1e>,
- <&UIC1 0x1f>,
- <&UIC2 0x19>;
};
&IIC0 {
fan0: fan@1b {
compatible = "microchip,tc654";
reg = <0x1b>;
- cooling-min-level = <0>;
- cooling-max-level = <255>;
#cooling-cells = <2>; /* min followed by max */
gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>; /* fan status */
&EMAC0 {
status = "okay";
phy-handle = <&phy0>;
+ fifo-entry-size = <10>;
mdio {
#address-cells = <1>;
phy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
+ qca,mib-poll-interval = <500>;
+
qca,ar8327-initvals = <
0x0010 0x40000000
0x0624 0x007f7f7f
};
&POB0 {
- gpio_keys_polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <2>;
- autorepeat;
- poll-interval = <60>; /* 3 * 20 = 60ms */
+
+ keys {
+ compatible = "gpio-keys";
reset {
label = "Reset button";
+ gpios = <&GPIO0 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
- gpios = <&GPIO0 15 GPIO_ACTIVE_HIGH>;
interrupt-parent = <&UIC1>;
interrupts = <0x14 IRQ_TYPE_EDGE_FALLING>;
+ debounce-interval = <60>;
};
backup_hd {
label = "Backup HD button";
- gpios = <&GPIO0 19 GPIO_ACTIVE_HIGH>;
+ gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
interrupt-parent = <&UIC1>;
interrupts = <0x1e IRQ_TYPE_EDGE_FALLING>;
+ debounce-interval = <60>;
};
rfkill {
label = "RFKILL button";
- gpios = <&GPIO0 20 GPIO_ACTIVE_HIGH>;
+ gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
interrupt-parent = <&UIC1>;
interrupts = <0x1f IRQ_TYPE_EDGE_FALLING>;
+ debounce-interval = <60>;
};
wps {
label = "WPS button";
- gpios = <&GPIO0 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
interrupt-parent = <&UIC2>;
interrupts = <0x19 IRQ_TYPE_EDGE_FALLING>;
- };
-
- sdcard {
- label = "SDCard inserted";
- gpios = <&GPIO0 7 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
+ debounce-interval = <60>;
};
};
- gpio-leds {
+ leds {
compatible = "gpio-leds";
- status: power-green {
- label = "wndr4700:green:power";
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_POWER;
gpios = <&GPIO0 8 GPIO_ACTIVE_HIGH>;
};
- failsafe: power-orange {
- label = "wndr4700:orange:power";
+ led-1 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_FAULT;
gpios = <&GPIO0 9 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "panic";
+ panic-indicator;
};
- usb-blue {
- label = "wndr4700:blue:usb";
+ led-2 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_USB;
gpios = <&GPIO0 10 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&usb2_port 1>, <&usb2_port 2>,
+ <&usb3_port 1>, <&usb3_port 2>;
+ linux,default-trigger = "usbport";
};
- logo-white {
- label = "wndr4700:white:logo";
+ led-3 {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_INDICATOR;
gpios = <&GPIO0 11 GPIO_ACTIVE_HIGH>;
};
- wan-yellow {
- label = "wndr4700:yellow:wan";
+ led-4 {
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_WAN;
gpios = <&GPIO0 3 GPIO_ACTIVE_HIGH>;
};
- wan-green {
- label = "wndr4700:green:wan";
+ led-5 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WAN;
gpios = <&GPIO0 12 GPIO_ACTIVE_HIGH>;
};
- hd-green {
- label = "wndr4700:green:hd";
+ led-6 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_DISK;
gpios = <&GPIO0 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "disk-activity";
};
- hd-red {
- label = "wndr4700:red:hd";
+ led-7 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_DISK_ERR;
gpios = <&GPIO0 17 GPIO_ACTIVE_HIGH>;
};
- wlan-blue {
- label = "wndr4700:blue:wlan";
+ led-8 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WLAN;
gpios = <&GPIO0 18 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
};
};
};
&PCIE0 {
status = "okay";
-};
-&MSI {
- status = "okay";
+ /*
+ * relevant lspci topology:
+ *
+ * -+-[0000:40]---00.0-[41-7f]----00.0-[42-45]--+-02.0-[43]----00.0
+ * +-03.0-[44]----00.0
+ * \-04.0-[45]----00.0
+ *
+ */
+
+ bridge@64,0 {
+ reg = <0x00400000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ bridge@65,0 {
+ /* IDT PES4T4 PCI Express Switch */
+ compatible = "pci111d,803a";
+ reg = <0x00410000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ bridge@66,2 {
+ compatible = "pci111d,803a";
+ reg = <0x00421000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi0: wifi@67,0 {
+ /* Atheros AR9380 5GHz */
+ compatible = "pci168c,0030";
+ reg = <0x00430000 0 0 0 0>;
+ interrupts = <3>; /* INTC */
+ nvmem-cell-names = "mac-address", "calibration";
+ nvmem-cells = <&macaddr_wifi_0>, <&calibration_wifi_1000>;
+
+ /*
+ * Because this was such a pain.
+ * Here's the full device path:
+ * pci0000:40/0000:40:00.0/0000:41:00.0/0000:42:02.0/0000:43:00.0
+ */
+ };
+ };
+
+ bridge@66,3 {
+ compatible = "pci111d,803a";
+ reg = <0x00421800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi1: wifi@68,0 {
+ /* Atheros AR9381 2.4GHz */
+ compatible = "pci168c,0033";
+ reg = <0x00440000 0 0 0 0>;
+ interrupts = <4>; /* INTD */
+ nvmem-cell-names = "mac-address", "calibration";
+ nvmem-cells = <&macaddr_wifi_c>, <&calibration_wifi_5000>;
+ };
+ };
+
+ bridge@66,4 {
+ compatible = "pci111d,803a";
+ reg = <0x00422000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ usb1: usb@69,0 {
+ /* Renesas uPD720202 */
+ compatible = "pci1912,0015";
+ reg = <0x00450000 0 0 0 0>;
+ interrupts = <1>; /* INTA */
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb2_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <1>;
+ };
+
+ usb3_port: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <1>;
+ };
+ };
+ };
+ };
+ };
};