-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
+# SPDX-License-Identifier: GPL-2.0-only
+
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-include $(INCLUDE_DIR)/host.mk
-
-DEVICE_VARS += DEVICE_PROFILE IMAGE_SIZE DTB_SIZE
-
-define Device/Default
- PROFILES := Default
- KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
- DEVICE_PROFILE :=
- DEVICE_DTS :=
- KERNEL_ENTRY := 0x00000000
- KERNEL_LOADADDR := 0x00000000
- DEVICE_DTS_DIR := ../dts
-endef
-
-define Build/dtb
- $(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb,,--space $(DTB_SIZE))
-endef
-
-ifeq ($(SUBTARGET),nand)
-
-define Image/cpiogz
- ( cd $(TARGET_DIR); find . | cpio -o -H newc | gzip -9n >$(KDIR_TMP)/$(IMG_PREFIX)-rootfs.cpio.gz )
-endef
-
-define Build/copy-file
- cat "$(1)" > "$@"
-endef
-define Build/MerakiAdd-dtb
- $(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb)
- ( \
- dd if=$@.dtb bs=$(DTB_SIZE) conv=sync; \
- dd if=$@ bs=$(BLOCKSIZE) conv=sync; \
- ) > $@.new
- @mv $@.new $@
-endef
-
-define Build/MerakiAdd-initramfs
- $(call Image/cpiogz)
+define Build/boot-img
+ $(RM) -rf $@.bootdir
+ mkdir -p $@.bootdir/boot
- -$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T ramdisk \
- -C gzip -n "$(PROFILE) rootfs" \
- -d $(KDIR_TMP)/$(IMG_PREFIX)-rootfs.cpio.gz \
- $(KDIR_TMP)/$(IMG_PREFIX)-uramdisk.image.gz
+ $(CP) $@.scr $@.bootdir/boot/boot.scr
+ $(CP) $(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb $@.bootdir/boot/$(DEVICE_DTB)
+ $(CP) $(IMAGE_KERNEL) $@.bootdir/boot/uImage
- ( \
- dd if=$@ bs=1k conv=sync; \
- dd if=$(KDIR_TMP)/$(IMG_PREFIX)-uramdisk.image.gz bs=$(BLOCKSIZE) conv=sync; \
- ) > $@.new
- @mv $@.new $@
-endef
+ genext2fs --block-size $(BLOCKSIZE:%k=%Ki) \
+ --size-in-blocks $$((1024 * $(CONFIG_TARGET_KERNEL_PARTSIZE))) \
+ --root $@.bootdir $@.boot
-define Build/MerakiNAND
- -$(STAGING_DIR_HOST)/bin/mkmerakifw \
- -B $(DEVICE_PROFILE) -s \
- -i $@ \
- -o $@.new
- @cp $@.new $@
+ # convert it to revision 1 - needed for u-boot ext2load
+ $(STAGING_DIR_HOST)/bin/tune2fs -O filetype $@.boot
+ $(STAGING_DIR_HOST)/bin/e2fsck -pDf $@.boot > /dev/null
endef
-define Device/mr24
- DEVICE_TITLE := Cisco Meraki MR24
- DEVICE_PACKAGES := kmod-spi-gpio kmod-ath9k wpad-mini
- DEVICE_PROFILE := MR24
- DEVICE_DTS := MR24
- BLOCKSIZE := 64512
- IMAGES := sysupgrade.tar
- DTB_SIZE := 64512
- KERNEL_SIZE := 2048k
- IMAGE_SIZE := 8191k
- KERNEL := kernel-bin | lzma | uImage lzma | MerakiAdd-dtb | MerakiNAND
- KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux | gzip | uImage gzip | MerakiAdd-dtb | pad-to 2047k | MerakiAdd-initramfs | MerakiNAND
- IMAGE/sysupgrade.tar := sysupgrade-tar
-endef
-TARGET_DEVICES += mr24
-
-define Build/create-uImage-dtb
- # flat_dt target expect FIT image - which WNDR4700's uboot doesn't support
- -$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) \
- -O linux -T kernel -C none \
- -n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' \
- -d $@.dtb $@.new
- @mv $@.new $@
+define Build/boot-script
+ $(STAGING_DIR_HOST)/bin/mkimage -A powerpc -T script -C none -n "$(PROFILE) Boot Script" \
+ -d mbl_boot.scr \
+ $@.scr
endef
-define Build/append-fakerootfs
- rm -rf $@.fakerootsquashfs $@.fakefs
-
- # append a fake/empty rootfs to fool netgear's uboot
- # CHECK_DNI_FIRMWARE_ROOTFS_INTEGRITY in do_chk_dniimg()
- dd if=/dev/zero of=$@.fakerd bs=16 count=1 conv=sync
-
- -$(STAGING_DIR_HOST)/bin/mkimage \
- -A $(LINUX_KARCH) -O linux -T filesystem -C none \
- -a 0x00000000 -e 0x00000000 \
- -n '$(DEVICE_PROFILE) fakerootfs' \
- -d $@.fakerd $@.fakefs
-
- cat $@.fakefs >> $@
- rm -rf $@.fakerootsquashfs $@.fakefs
+define Build/export-dtb
+ cp $(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb $@
endef
-define Build/wndr4700-specialImage
+define Build/MuImage-initramfs
rm -rf $@.fakerd $@.new
dd if=/dev/zero of=$@.fakerd bs=32 count=1 conv=sync
# part of the legacy multi image. Since we need to put the
# device tree stuff into part 3.
- -$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T multi \
- -C $(1) -a $(KERNEL_LOADADDR) -e $(KERNEL_ENTRY) \
- -n '$(DEVICE_PROFILE) initramfs' -d $@:$@.fakerd:$@.dtb $@.new
+ -$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T multi -C $(1) \
+ -a $(KERNEL_LOADADDR) -e $(KERNEL_ENTRY) -n '$(BOARD_NAME) initramfs' \
+ -d $@:$@.fakerd:$(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb $@.new
mv $@.new $@
rm -rf $@.fakerd
endef
-define Device/WNDR4700
- DEVICE_TITLE := Netgear Centria N900 WNDR4700/WNDR4720
- DEVICE_PACKAGES := badblocks block-mount e2fsprogs \
- kmod-ath9k kmod-dm kmod-fs-ext4 kmod-fs-vfat kmod-ledtrig-usbdev \
- kmod-md-mod kmod-nls-cp437 kmod-nls-iso8859-1 kmod-nls-iso8859-15 \
- kmod-nls-utf8 kmod-usb3 kmod-usb-dwc2 kmod-usb-storage \
- partx-utils swconfig wpad-mini
- DEVICE_NAME := wndr4700
- DEVICE_PROFILE := wndr4700
- DEVICE_DTS := wndr4700
- PAGESIZE := 2048
- SUBPAGESIZE := 512
- BLOCKSIZE := 131072
- DTB_SIZE := 131008
- IMAGE_SIZE:=25559040
- IMAGES := factory.img sysupgrade.tar
- KERNEL_SIZE := 1920k
- KERNEL := kernel-bin | lzma | uImage lzma | pad-offset $$(BLOCKSIZE) 64 | append-fakerootfs
- KERNEL_INITRAMFS := kernel-bin | gzip | dtb | wndr4700-specialImage gzip
- IMAGE/factory.img := dtb | create-uImage-dtb | append-kernel | pad-to 2M | append-ubi | \
- netgear-dni | check-size $$$$(IMAGE_SIZE)
- IMAGE/sysupgrade.tar := sysupgrade-tar
- NETGEAR_BOARD_ID := WNDR4700
- NETGEAR_HW_ID := 29763875+128+256
-endef
-TARGET_DEVICES += WNDR4700
-
-endif
-
-ifeq ($(SUBTARGET),sata)
-
-### Image scripts for the WD My Book Live Series ###
-define Build/boot-script
- $(STAGING_DIR_HOST)/bin/mkimage -A powerpc -T script -C none -n "$(PROFILE) Boot Script" \
- -d mbl_boot.scr \
- $@.scr
-endef
-
-define Build/boot-img
- $(RM) -rf $@.bootdir
- mkdir -p $@.bootdir/boot
-
- $(CP) $@.scr $@.bootdir/boot/boot.scr
- $(CP) $@.dtb $@.bootdir/boot/$(DEVICE_DTB)
- $(CP) $(word 1,$^) $@.bootdir/boot/uImage
-
- genext2fs --block-size $(BLOCKSIZE) --size-in-blocks $$((1024 * $(BOOT_SIZE))) --root $@.bootdir $@.boot
-
- # convert it to revision 1 - needed for u-boot ext2load
- $(STAGING_DIR_HOST)/bin/tune2fs -O filetype $@.boot
- $(STAGING_DIR_HOST)/bin/e2fsck -pDf $@.boot > /dev/null
+define Build/prepend-dtb
+ cat "$(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb" "$@" > "$@.new"
+ mv "$@.new" "$@"
endef
-define Build/hdd-img
- ./mbl_gen_hdd_img.sh $@ $@.boot $(word 2,$^)
- $(if $(CONFIG_TARGET_IMAGES_GZIP),gzip -9n -c $@ > $(BIN_DIR)/$(notdir $@).gz)
-endef
-
-define Build/uRamdisk
- $(STAGING_DIR_HOST)/bin/mkimage \
- -A powerpc -T ramdisk -C gzip \
- -n "$(DEVICE_NAME) rootfs" \
- -d $@ $@.new
- mv $@.new $@
-endef
-
-define Build/recovery-tar
- sh ./mbl_gen_recovery_tar.sh \
- --profile $(DEVICE_PROFILE) \
- --dtb $(word 1,$^).dtb \
- --dtbname $(DEVICE_DTB) \
- --kernel $(word 1,$^) \
- --rootfs $@ \
- $@
-endef
-
-define Device/MyBookLiveDefault
- IMAGE_SIZE := 48m
- BLOCKSIZE := 1024
- DTB_SIZE := 16384
- KERNEL := kernel-bin | dtb | gzip | uImage gzip
- BOOT_SIZE := 8
- IMAGES := rootfs.img recovery.tar kernel.dtb
- DEVICE_DTB := apollo3g.dtb
- FILESYSTEMS := ext4
- IMAGE/kernel.dtb := append-dtb
- IMAGE/rootfs.img := boot-script | dtb | boot-img | hdd-img
- IMAGE/recovery.tar := append-rootfs | gzip | uRamdisk | recovery-tar
-endef
-
-define Device/MyBookLiveSingle
-$(Device/MyBookLiveDefault)
- DEVICE_TITLE := Western Digital My Book Live
- DEVICE_DTS := apollo3g
- DEVICE_PROFILE := apollo3g
+define Image/cpiogz
+ ( cd $(TARGET_DIR); find . | cpio -o -H newc | gzip -9n >$(KDIR_TMP)/$(IMG_PREFIX)-rootfs.cpio.gz )
endef
-TARGET_DEVICES += MyBookLiveSingle
-
-define Device/MyBookLiveDuo
-$(Device/MyBookLiveDefault)
- DEVICE_TITLE := Western Digital My Book Live Duo
- DEVICE_PACKAGES := kmod-usb-dwc2 kmod-ledtrig-usbdev kmod-usb-storage kmod-fs-vfat wpad-mini
- DEVICE_DTS := apollo3g-duo
- DEVICE_PROFILE := ap2nc
+define Device/Default
+ PROFILES := Default
+ KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
+ DEVICE_DTS :=
+ KERNEL_ENTRY := 0x00000000
+ KERNEL_LOADADDR := 0x00000000
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_DTS = $(subst _,-,$(1))
endef
-TARGET_DEVICES += MyBookLiveDuo
-
-endif
+include $(SUBTARGET).mk
$(eval $(call BuildImage))
projects / openwrt / staging / jow.git / blobdiff