# Copyright (C) 2011-2015 OpenWrt.org
#
-. /lib/functions/uci-defaults-new.sh
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
. /lib/ar71xx.sh
board_config_update
-ucidef_set_interface_loopback
-
board=$(ar71xx_board_name)
case "$board" in
all0315n |\
all0258n |\
+dr344 |\
ja76pf2|\
rocket-m-ti |\
ubnt-unifi-outdoor)
;;
ap132 |\
+ap152 |\
wlr8100)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
- ucidef_add_switch_vlan "switch0" "2" "0t 1"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
;;
esr1750 |\
epg5000)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "0t 5"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;;
-ap136-010)
- ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "5 6"
+cr5000)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
+ap136-010 |\
ap147-010)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "5 6"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
;;
ap136-020 |\
ap135-020 |\
+tew-823dru |\
tl-wr1043nd-v2 |\
wzr-450hp2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "5 6"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
;;
archer-c5 |\
archer-c7 |\
tl-wdr4900-v2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 2 3 4 5"
- ucidef_add_switch_vlan "switch0" "2" "1 6"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
bsb)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 3"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "1:lan" "3:lan" # XXX: confirm cpu port!
ucidef_set_interface_wlan
;;
cpe510)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 5"
- ucidef_add_switch_vlan "switch0" "2" "0t 4"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "5:lan" "4:wan"
;;
airgatewaypro)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 4"
- ucidef_add_switch_vlan "switch0" "2" "0t 5"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "4:lan" "5:wan"
;;
db120 |\
rb-2011uias |\
rb-2011uas-2hnd|\
rb-2011uias-2hnd)
- ucidef_set_interfaces_lan_wan "eth0.1 eth1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
- ucidef_add_switch_vlan "switch0" "2" "0t 1"
- ucidef_add_switch "switch1" "1" "1"
- ucidef_add_switch_vlan "switch1" "1" "0 1 2 3 4 5"
-
case "$board" in
rb-2011uas* | rb-2011uias | rb-2011uias-2hnd)
- ucidef_set_interface_raw "sfp" "eth0.3"
- ucidef_add_switch_vlan "switch0" "3" "0t 6"
- ;;
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" "6:sfp"
+ ;;
+ *)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
+ ;;
esac
+
+ ucidef_add_switch "switch1" \
+ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:lan"
;;
dir-825-b1|\
tew-673gru)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+ ucidef_set_interfaces_lan_wan "eth0" "eth1"
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
;;
f9k1115v2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "2 3 4 5 6"
- ucidef_add_switch_vlan "switch0" "2" "0 1"
+ ucidef_add_switch "switch0" \
+ "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" \
+ "0@eth0" "1:wan" # XXX: confirm cpu ports!
;;
nbg460n_550n_550nh)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "0" "0 1 2 3 5"
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
;;
nbg6616 |\
nbg6716)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "5 6"
+ ucidef_set_interfaces_lan_wan "eth0" "eth1"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" \
+ "5:wan" "6@eth1"
;;
ap143 |\
rb-433 |\
rb-433u)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "1 2 5"
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "5@eth1"
;;
rb-435g)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "1:lan" "2:lan" # XXX: confirm!
;;
rb-450)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5"
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth1"
;;
rb-450g |\
routerstation-pro)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "2:lan:3" "3:lan:2" "4:lan:1"
;;
ap136 |\
rb-751g |\
rb-951g-2hnd |\
wzr-hp-g450h)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
- ucidef_add_switch_vlan "switch0" "2" "0t 1"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
;;
rb-951ui-2hnd)
rb-493g)
ucidef_set_interfaces_lan_wan "eth0 eth1.1" "eth1.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
- ucidef_add_switch "switch1" "1" "1"
- ucidef_add_switch_vlan "switch1" "1" "0t 1 2 3 4"
- ucidef_add_switch_vlan "switch1" "2" "0t 5"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+ ucidef_add_switch "switch1" \
+ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
wzr-hp-g300nh2 |\
pb92 |\
ap113)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1 3 4 5"
- ucidef_add_switch_vlan "switch0" "2" "0t 2"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "2:wan"
;;
el-m150)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 3"
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "3@eth1" # XXX: confirm!
+ ;;
+
+tellstick-znet-lite)
+ ucidef_set_interface_wan "eth0" "dhcp"
+ ucidef_set_interface_raw "wlan" "wlan0" "dhcp"
;;
tl-wdr4300|\
tl-wr1041n-v2)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
- ucidef_add_switch_vlan "switch0" "2" "0t 1"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:wan" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4"
;;
tl-wr1043nd)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
- ucidef_add_switch_vlan "switch0" "2" "0 5t"
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
;;
tl-wr2543n)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 9t"
- ucidef_add_switch_vlan "switch0" "2" "0 9t"
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
;;
tl-wr841n-v1|\
;;
dir-615-i1 |\
+omy-g1 |\
r6100 |\
smart-300 |\
tl-mr3420-v2 |\
wnr2000-v4 |\
wnr2200 |\
wnr612-v2 |\
-wnr1000-v2)
+wnr1000-v2 |\
+wpn824n)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth1" # XXX: confirm!
;;
uap-pro)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1"
- ucidef_add_switch_vlan "switch0" "2" "0t 2"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:wan"
;;
nanostation-m-xw)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 5"
- ucidef_add_switch_vlan "switch0" "2" "0t 1"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "5:lan" "1:wan"
;;
wrt160nl)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4 5"
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth0"
;;
wzr-hp-g300nh)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
+ ;;
+
+cr3000)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
;;
dgl-5500-a1 |\
dir-825-c1)
local mac
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "0t 5"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
mac=$(mtd_get_mac_ascii nvram "wan_mac")
[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
;;
mynet-n750)
local mac
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "0t 5"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
mac=$(mtd_get_mac_ascii devdata "wanmac")
[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
;;
dir-835-a1 |\
wndr3700v4 | \
wndr4300)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "0t 5"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
mac_lan=$(mtd_get_mac_binary caldata 0)
[ -n "$mac_lan" ] && ucidef_set_interface_macaddr "lan" "$mac_lan"
mac_wan=$(mtd_get_mac_binary caldata 6)
esr900)
local mac
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
- ucidef_add_switch_vlan "switch0" "2" "0t 5"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
;;
dlan-pro-1200-ac)
ucidef_set_interface_lan "eth0"
- ucidef_add_switch "switch0" "1" "0"
- ucidef_add_switch_vlan "switch0" "0" "0 2 3 4"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan" "3:lan" "4:lan"
+ ucidef_add_switch_attr "switch0" "enable" "false"
;;
+alfa-ap120c |\
all0305 |\
antminer-s1 |\
antminer-s3 |\
+antrouter-r1 |\
aw-nr580 |\
bullet-m |\
+c-55 |\
cap4200ag |\
eap300v2 |\
eap7660d |\
el-mini |\
loco-m-xw |\
mr1750 |\
+mr18 |\
mr600 |\
mr600v2 |\
mr900 |\
tl-wa901nd |\
tl-wa901nd-v2 |\
tl-wa901nd-v3 |\
+tl-wa901nd-v4 |\
tl-wr703n |\
tube2h |\
+unifiac |\
wndap360 |\
mynet-rext |\
wp543)
ucidef_set_interface_lan "eth0"
;;
-arduino-yun | \
+cap324)
+ ucidef_set_interface_lan "eth0" "dhcp"
+ ;;
+
+arduino-yun |\
+tl-wa801nd-v3 |\
dir-505-a1)
ucidef_set_interface_lan "eth1"
;;
alfa-nx |\
ap83 |\
gl-ar150 |\
+gl-domino |\
gl-inet |\
jwap003 |\
pb42 |\
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
+gl-ar300)
+ ucidef_set_interfaces_lan_wan "eth1" "eth0"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
+ ;;
+
+wpj342)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:wan"
+ ;;
+
wpj344)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 3"
- ucidef_add_switch_vlan "switch0" "2" "0t 2"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "3:lan" "2:wan"
;;
wpj531)
;;
wpj558)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "5 6t"
- ucidef_add_switch_vlan "switch0" "2" "1 6t"
+ ucidef_add_switch "switch0" \
+ "5:lan" "1:wan" "6@eth0"
;;
ap121 |\
whr-hp-gn |\
wzr-hp-ag300h)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
wzr-hp-g450h)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
- ucidef_add_switch_vlan "switch0" "2" "0t 1"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan:1 3:lan:2 4:lan:3 5:lan:4" "1:wan"
;;
ew-dorin)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0t 1 2"
- ucidef_add_switch_vlan "switch0" "2" "0t 3"
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:wan"
;;
ew-dorin-router)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 2 3"
+ ucidef_add_switch "switch0" "0@eth0" "2:lan" "3:lan"
;;
wndr3700)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+ ucidef_set_interfaces_lan_wan "eth0" "eth1"
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
+
# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
- uci set network.@switch[-1].blinkrate='2'
+ ucidef_add_switch_attr "switch0" "blinkrate" 2
- ucidef_add_switch_port "switch0" "1"
# Port 1 controls the GREEN configuration of LEDs for
# the switch and the section does not correspond to a real
# switch port.
# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
# 14: Link (master); 15: separate register
- uci set network.@switch_port[-1].led='6'
+ ucidef_add_switch_port_attr "switch0" 1 led 6
- ucidef_add_switch_port "switch0" "2"
# Port 2 controls the ORANGE configuration of LEDs for
# the switch and the section does not correspond to a real
# switch port.
#
# See the key above for switch port 1 for the meaning of the
# 'led' setting below.
- uci set network.@switch_port[-1].led='9'
+ ucidef_add_switch_port_attr "switch0" 2 led 9
- ucidef_add_switch_port "switch0" "5"
# Port 5 controls the configuration of the WAN LED and the
# section does not correspond to a real switch port.
#
#
# See the key above for switch port 1 for the meaning of the
# 'led' setting below.
- uci set network.@switch_port[-1].led='2'
+ ucidef_add_switch_port_attr "switch0" 5 led 2
;;
*)