ucidef_add_switch_vlan "switch0" "2" "5 6"
;;
-archer-c7)
+archer-c7 |\
+tl-wdr4900-v2)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 2 3 4 5"
ucidef_add_switch_vlan "switch0" "0" "0 1 2 3 5"
;;
+nbg6716)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
+ ucidef_add_switch_vlan "switch0" "2" "5 6"
+ ;;
+
rb-433 |\
rb-433u)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch_vlan "switch0" "2" "0t 1"
;;
+rb-951ui-2hnd)
+ ucidef_set_interfaces_lan_wan "eth1" "eth0"
+ ;;
+
rb-493g)
ucidef_set_interfaces_lan_wan "eth0 eth1.1" "eth1.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "2" "0t 2"
;;
+el-m150)
+ ucidef_set_interfaces_lan_wan "eth1" "eth0"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0 1 3"
+ ;;
+
+el-mini)
+ ucidef_set_interface_lan "eth0"
+ ;;
+
tl-wdr4300|\
tl-wr1041n-v2)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
;;
+mynet-n750)
+ local mac
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
+ ucidef_add_switch_vlan "switch0" "2" "0t 5"
+ mac=$(mtd_get_mac_ascii devdata "wanmac")
+ [ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
+ ;;
+
dir-835-a1 |\
wndr4300)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
tl-mr3040-v2 |\
tl-wa750re |\
tl-wa850re |\
+tl-wa801nd-v2 |\
tl-wa901nd |\
tl-wa901nd-v2 |\
+tl-wa901nd-v3 |\
tl-wr703n |\
wndap360 |\
mynet-rext |\
airrouter |\
dir-600-a1 |\
dir-615-c1 |\
+dir-615-e1 |\
dir-615-e4 |\
+hiwifi-hc6361 |\
ja76pf |\
mynet-n600 |\
+oolite |\
rb-750 |\
rb-751 |\
tew-632brp |\
tl-wr741nd |\
tl-wr741nd-v4 |\
tl-wr841n-v7 |\
+tl-wr841n-v9 |\
whr-g301n |\
whr-hp-g300n |\
whr-hp-gn |\
;;
ew-dorin)
- ucidef_set_interface_lan "eth0"
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "0 1 2 3"
+ ucidef_add_switch_vlan "switch0" "1" "0t 1 2"
+ ucidef_add_switch_vlan "switch0" "2" "0t 3"
;;
ew-dorin-router)
ucidef_add_switch_vlan "switch0" "1" "0 2 3"
;;
+wndr3700)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+ # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
+ uci set network.@switch[-1].blinkrate='2'
+
+ ucidef_add_switch_port "switch0" "1"
+ # Port 1 controls the GREEN configuration of LEDs for
+ # the switch and the section does not correspond to a real
+ # switch port.
+ #
+ # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+ # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+ # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+ # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
+ # 14: Link (master); 15: separate register
+ uci set network.@switch_port[-1].led='6'
+
+ ucidef_add_switch_port "switch0" "2"
+ # Port 2 controls the ORANGE configuration of LEDs for
+ # the switch and the section does not correspond to a real
+ # switch port.
+ #
+ # See the key above for switch port 1 for the meaning of the
+ # 'led' setting below.
+ uci set network.@switch_port[-1].led='9'
+
+ ucidef_add_switch_port "switch0" "5"
+ # Port 5 controls the configuration of the WAN LED and the
+ # section does not correspond to a real switch port.
+ #
+ # To toggle the use of green or orange LEDs for the WAN port,
+ # see the LED setting for wndr3700:green:wan in /etc/config/system.
+ #
+ # See the key above for switch port 1 for the meaning of the
+ # 'led' setting below.
+ uci set network.@switch_port[-1].led='2'
+ ;;
+
*)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;