done
}
-# make sure we got uboot-envtools and fw_env.config copied over to the ramfs
-platform_add_ramfs_ubootenv()
+platform_check_image_target_openmesh()
{
- [ -e /usr/sbin/fw_printenv ] && install_bin /usr/sbin/fw_printenv /usr/sbin/fw_setenv
- [ -e /etc/fw_env.config ] && install_file /etc/fw_env.config
+ img_board_target="$1"
+
+ case "$img_board_target" in
+ A60)
+ [ "$board" = "a40" ] && return 0
+ [ "$board" = "a60" ] && return 0
+ echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
+ return 1
+ ;;
+ OM2P)
+ [ "$board" = "om2p" ] && return 0
+ [ "$board" = "om2pv2" ] && return 0
+ [ "$board" = "om2pv4" ] && return 0
+ [ "$board" = "om2p-lc" ] && return 0
+ [ "$board" = "om2p-hs" ] && return 0
+ [ "$board" = "om2p-hsv2" ] && return 0
+ [ "$board" = "om2p-hsv3" ] && return 0
+ [ "$board" = "om2p-hsv4" ] && return 0
+ echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
+ return 1
+ ;;
+ OM5P)
+ [ "$board" = "om5p" ] && return 0
+ [ "$board" = "om5p-an" ] && return 0
+ echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
+ return 1
+ ;;
+ OM5PAC)
+ [ "$board" = "om5p-ac" ] && return 0
+ [ "$board" = "om5p-acv2" ] && return 0
+ echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
+ return 1
+ ;;
+ MR1750)
+ [ "$board" = "mr1750" ] && return 0
+ [ "$board" = "mr1750v2" ] && return 0
+ echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
+ return 1
+ ;;
+ MR600)
+ [ "$board" = "mr600" ] && return 0
+ [ "$board" = "mr600v2" ] && return 0
+ echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
+ return 1
+ ;;
+ MR900)
+ [ "$board" = "mr900" ] && return 0
+ [ "$board" = "mr900v2" ] && return 0
+ echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
+ return 1
+ ;;
+ *)
+ echo "Invalid board target ($img_board_target). Use the correct image for this platform"
+ return 1
+ ;;
+ esac
}
-append sysupgrade_pre_upgrade platform_add_ramfs_ubootenv
platform_check_image_openmesh()
{
;;
esac
- case "$img_board_target" in
- OM2P)
- [ "$board" = "om2p" ] && break
- [ "$board" = "om2p-lc" ] && break
- [ "$board" = "om2p-hs" ] && break
- echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
- return 1
- ;;
- MR600)
- [ "$board" = "mr600" ] && break
- [ "$board" = "mr600v2" ] && break
- echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
- return 1
- ;;
- *)
- echo "Invalid board target ($img_board_target). Use the correct image for this platform"
- return 1
- ;;
- esac
+ platform_check_image_target_openmesh "$img_board_target" || return 1
- [ $img_num_files -ne 3 ] && {
+ [ $img_num_files -lt 3 ] && {
echo "Invalid number of embedded images ($img_num_files). Use the correct image for this platform"
return 1
}
local kernel_start_addr= kernel_start_addr1= kernel_start_addr2=
local kernel_size= kernel_md5=
local rootfs_size= rootfs_checksize= rootfs_md5=
- local kernel_bsize= total_size=7340032
+ local kernel_bsize= total_size=
local data_offset=$((64 * 1024)) block_size= offset=
local uboot_env_upgrade="/tmp/fw_env_upgrade"
local cfg_size= kernel_size= rootfs_size=
local append=""
- [ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
+ [ -f "$UPGRADE_BACKUP" -a "$UPGRADE_OPT_SAVE_CONFIG" -eq 1 ] && append="-j $UPGRADE_BACKUP"
cfg_size=$(dd if="$img_path" bs=2 skip=35 count=4 2>/dev/null)
kernel_size=$(dd if="$img_path" bs=2 skip=71 count=4 2>/dev/null)
case $img_board_target in
OM2P)
block_size=$((256 * 1024))
+ total_size=7340032
kernel_start_addr1=0x9f1c0000
kernel_start_addr2=0x9f8c0000
;;
- MR600)
+ OM5P|OM5PAC|MR600|MR900|MR1750|A60)
block_size=$((64 * 1024))
+ total_size=7995392
kernel_start_addr1=0x9f0b0000
kernel_start_addr2=0x9f850000
;;
printf "rootfs_size %s\n" $rootfs_checksize >> $uboot_env_upgrade
printf "rootfs_checksum %s\n" $rootfs_md5 >> $uboot_env_upgrade
+ mkdir -p /var/lock
fw_setenv -s $uboot_env_upgrade || {
echo "failed to update U-Boot environment"
return 1