* by the Free Software Foundation.
*/
-#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/input.h>
-#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
+#include "machtype.h"
#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ar9xxx-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define AP81_GPIO_LED_STATUS 1
+#define AP81_GPIO_LED_AOSS 3
+#define AP81_GPIO_LED_WLAN 6
+#define AP81_GPIO_LED_POWER 14
#define AP81_GPIO_BTN_SW4 12
#define AP81_GPIO_BTN_SW1 21
-#define AP81_BUTTONS_POLL_INTERVAL 20
+#define AP81_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AP81_KEYS_DEBOUNCE_INTERVAL (3 * AP81_KEYS_POLL_INTERVAL)
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition ap81_partitions[] = {
.offset = 0,
.size = 0x040000,
.mask_flags = MTD_WRITEABLE,
- } , {
+ }, {
.name = "u-boot-env",
.offset = 0x040000,
.size = 0x010000,
- } , {
+ }, {
.name = "rootfs",
.offset = 0x050000,
.size = 0x500000,
- } , {
+ }, {
.name = "uImage",
.offset = 0x550000,
.size = 0x100000,
- } , {
+ }, {
.name = "ART",
.offset = 0x650000,
.size = 0x1b0000,
static struct flash_platform_data ap81_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
- .parts = ap81_partitions,
- .nr_parts = ARRAY_SIZE(ap81_partitions),
+ .parts = ap81_partitions,
+ .nr_parts = ARRAY_SIZE(ap81_partitions),
#endif
};
-static struct spi_board_info ap81_spi_info[] = {
+static struct gpio_led ap81_leds_gpio[] __initdata = {
{
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = &ap81_flash_data,
+ .name = "ap81:green:status",
+ .gpio = AP81_GPIO_LED_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "ap81:amber:aoss",
+ .gpio = AP81_GPIO_LED_AOSS,
+ .active_low = 1,
+ }, {
+ .name = "ap81:green:wlan",
+ .gpio = AP81_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "ap81:green:power",
+ .gpio = AP81_GPIO_LED_POWER,
+ .active_low = 1,
}
};
-static struct gpio_button ap81_gpio_buttons[] __initdata = {
+static struct gpio_keys_button ap81_gpio_keys[] __initdata = {
{
.desc = "sw1",
.type = EV_KEY,
.code = BTN_0,
- .threshold = 5,
+ .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
.gpio = AP81_GPIO_BTN_SW1,
.active_low = 1,
- } , {
+ }, {
.desc = "sw4",
.type = EV_KEY,
.code = BTN_1,
- .threshold = 5,
+ .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
.gpio = AP81_GPIO_BTN_SW4,
.active_low = 1,
}
static void __init ap81_setup(void)
{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
ar71xx_add_device_mdio(0x0);
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, eeprom, 0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ar71xx_eth0_data.phy_mask = 0xf;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.has_ar8216 = 1;
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, eeprom, 1);
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_usb();
- ar71xx_add_device_spi(NULL, ap81_spi_info,
- ARRAY_SIZE(ap81_spi_info));
+ ar71xx_add_device_m25p80(&ap81_flash_data);
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
+ ap81_leds_gpio);
- ar71xx_add_device_gpio_buttons(-1, AP81_BUTTONS_POLL_INTERVAL,
- ARRAY_SIZE(ap81_gpio_buttons),
- ap81_gpio_buttons);
+ ar71xx_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap81_gpio_keys),
+ ap81_gpio_keys);
- ar91xx_add_device_wmac();
+ ar9xxx_add_device_wmac(eeprom, NULL);
}
-MIPS_MACHINE(AR71XX_MACH_AP81, "Atheros AP81", ap81_setup);
+MIPS_MACHINE(AR71XX_MACH_AP81, "AP81", "Atheros AP81", ap81_setup);