ar71xx: fix polarity of GPIO buttons on the WNDR3700 board

[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-ap81.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap81.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap81.c
index 0b234cd45623752f30a6418561933bf365d5b74f..6fa950f70d605c1694704735e893a4c82d92968b 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap81.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap81.c
@@ -9,18 +9,18 @@
  *  by the Free Software Foundation.
  */
 
-#include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
-#include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
 
+#include "machtype.h"
 #include "devices.h"
 #include "dev-m25p80.h"
 #include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
+#include "dev-usb.h"
 
 #define AP81_GPIO_LED_STATUS   1
 #define AP81_GPIO_LED_AOSS     3
@@ -92,14 +92,14 @@ static struct gpio_button ap81_gpio_buttons[] __initdata = {
                .desc           = "sw1",
                .type           = EV_KEY,
                .code           = BTN_0,
-               .threshold      = 5,
+               .threshold      = 3,
                .gpio           = AP81_GPIO_BTN_SW1,
                .active_low     = 1,
        } , {
                .desc           = "sw4",
                .type           = EV_KEY,
                .code           = BTN_1,
-               .threshold      = 5,
+               .threshold      = 3,
                .gpio           = AP81_GPIO_BTN_SW4,
                .active_low     = 1,
        }
@@ -107,9 +107,9 @@ static struct gpio_button ap81_gpio_buttons[] __initdata = {
 
 static void __init ap81_setup(void)
 {
-       u8 *mac = (u8 *) KSEG1ADDR(0x1fff1000);
+       u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
 
-       ar71xx_set_mac_base(mac);
+       ar71xx_set_mac_base(eeprom);
        ar71xx_add_device_mdio(0x0);
 
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
@@ -135,7 +135,7 @@ static void __init ap81_setup(void)
                                        ARRAY_SIZE(ap81_gpio_buttons),
                                        ap81_gpio_buttons);
 
-       ar913x_add_device_wmac();
+       ar913x_add_device_wmac(eeprom, NULL);
 }
 
-MIPS_MACHINE(AR71XX_MACH_AP81, "Atheros AP81", ap81_setup);
+MIPS_MACHINE(AR71XX_MACH_AP81, "AP81", "Atheros AP81", ap81_setup);