* by the Free Software Foundation.
*/
-#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/input.h>
-#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
+#include "machtype.h"
#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
#define AP81_GPIO_LED_STATUS 1
#define AP81_GPIO_LED_AOSS 3
#endif
};
-static struct spi_board_info ap81_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = &ap81_flash_data,
- }
-};
-
static struct gpio_led ap81_leds_gpio[] __initdata = {
{
.name = "ap81:green:status",
.desc = "sw1",
.type = EV_KEY,
.code = BTN_0,
- .threshold = 5,
+ .threshold = 3,
.gpio = AP81_GPIO_BTN_SW1,
.active_low = 1,
} , {
.desc = "sw4",
.type = EV_KEY,
.code = BTN_1,
- .threshold = 5,
+ .threshold = 3,
.gpio = AP81_GPIO_BTN_SW4,
.active_low = 1,
}
static void __init ap81_setup(void)
{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ar71xx_set_mac_base(eeprom);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_add_device_usb();
- ar71xx_add_device_spi(NULL, ap81_spi_info,
- ARRAY_SIZE(ap81_spi_info));
+ ar71xx_add_device_m25p80(&ap81_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
ap81_leds_gpio);
ARRAY_SIZE(ap81_gpio_buttons),
ap81_gpio_buttons);
- ar91xx_add_device_wmac();
+ ar913x_add_device_wmac(eeprom, NULL);
}
-MIPS_MACHINE(AR71XX_MACH_AP81, "Atheros AP81", ap81_setup);
+MIPS_MACHINE(AR71XX_MACH_AP81, "AP81", "Atheros AP81", ap81_setup);