#include <linux/delay.h>
#include <linux/platform_device.h>
-#include <linux/input.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
#include <linux/spi/vsc7385.h>
-#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/ar91xx_flash.h>
+#include "machtype.h"
#include "devices.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
#define AP83_GPIO_LED_WLAN 6
#define AP83_GPIO_LED_POWER 14
#define AP83_050_GPIO_VSC7385_MOSI 16
#define AP83_050_GPIO_VSC7385_SCK 17
+#define AP83_BUTTONS_POLL_INTERVAL 20
+
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition ap83_flash_partitions[] = {
{
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
} , {
- .name = "rootfs",
+ .name = "kernel",
.offset = 0x060000,
- .size = 0x400000,
+ .size = 0x140000,
} , {
- .name = "kernel",
- .offset = 0x460000,
- .size = 0x100000,
+ .name = "rootfs",
+ .offset = 0x1a0000,
+ .size = 0x650000,
} , {
.name = "art",
- .offset = 0x560000,
- .size = 0x2a0000,
+ .offset = 0x7f0000,
+ .size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "firmware",
.offset = 0x060000,
- .size = 0x500000,
+ .size = 0x790000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
-static struct physmap_flash_data ap83_flash_data = {
+static struct ar91xx_flash_platform_data ap83_flash_data = {
.width = 2,
#ifdef CONFIG_MTD_PARTITIONS
.parts = ap83_flash_partitions,
};
static struct platform_device ap83_flash_device = {
- .name = "physmap-flash",
+ .name = "ar91xx-flash",
.id = -1,
.resource = ap83_flash_resources,
.num_resources = ARRAY_SIZE(ap83_flash_resources),
.desc = "soft_reset",
.type = EV_KEY,
.code = BTN_0,
- .threshold = 5,
+ .threshold = 3,
.gpio = AP83_GPIO_BTN_RESET,
.active_low = 1,
} , {
.desc = "jumpstart",
.type = EV_KEY,
.code = BTN_1,
- .threshold = 5,
+ .threshold = 3,
.gpio = AP83_GPIO_BTN_JUMPSTART,
.active_low = 1,
}
static struct vsc7385_platform_data ap83_vsc7385_data = {
.reset = ap83_vsc7385_reset,
+ .ucode_name = "vsc7385_ucode_ap83.bin",
+ .mac_cfg = {
+ .tx_ipg = 6,
+ .bit2 = 0,
+ .clk_sel = 3,
+ },
};
static struct spi_board_info ap83_spi_info[] = {
static void __init ap83_generic_setup(void)
{
- u8 *mac = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
- ar71xx_set_mac_base(mac);
+ ar71xx_set_mac_base(eeprom);
ar71xx_add_device_mdio(0xfffffffe);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
ap83_leds_gpio);
- ar71xx_add_device_gpio_buttons(-1, 20, ARRAY_SIZE(ap83_gpio_buttons),
+ ar71xx_add_device_gpio_buttons(-1, AP83_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(ap83_gpio_buttons),
ap83_gpio_buttons);
ar71xx_add_device_usb();
- ar91xx_add_device_wmac();
+ ar913x_add_device_wmac(eeprom, NULL);
platform_device_register(&ap83_flash_device);
static void __init ap83_040_setup(void)
{
- ar71xx_flash_lock_enable();
+ ap83_flash_data.is_shared=1;
ap83_generic_setup();
platform_device_register(&ap83_040_spi_device);
}
}
}
-MIPS_MACHINE(AR71XX_MACH_AP83, "Atheros AP83", ap83_setup);
+MIPS_MACHINE(AR71XX_MACH_AP83, "AP83", "Atheros AP83", ap83_setup);