* by the Free Software Foundation.
*/
-#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/input.h>
-#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
+#include "machtype.h"
#include "devices.h"
+#include "dev-dsa.h"
#include "dev-m25p80.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-pb42-pci.h"
+#include "dev-leds-gpio.h"
#define TL_WR841ND_V1_GPIO_LED_SYSTEM 2
#define TL_WR841ND_V1_GPIO_LED_QSS_GREEN 4
#define TL_WR841ND_V1_GPIO_BTN_RESET 3
#define TL_WR841ND_V1_GPIO_BTN_QSS 7
-#define TL_WR841ND_V1_BUTTONS_POLL_INTERVAL 20
+#define TL_WR841ND_V1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL \
+ (3 * TL_WR841ND_V1_KEYS_POLL_INTERVAL)
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition tl_wr841n_v1_partitions[] = {
.offset = 0,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
- } , {
+ }, {
.name = "kernel",
.offset = 0x020000,
.size = 0x140000,
- } , {
+ }, {
.name = "rootfs",
.offset = 0x160000,
.size = 0x280000,
- } , {
+ }, {
.name = "config",
.offset = 0x3e0000,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
- } , {
+ }, {
.name = "firmware",
.offset = 0x020000,
.size = 0x3c0000,
static struct flash_platform_data tl_wr841n_v1_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
- .parts = tl_wr841n_v1_partitions,
- .nr_parts = ARRAY_SIZE(tl_wr841n_v1_partitions),
+ .parts = tl_wr841n_v1_partitions,
+ .nr_parts = ARRAY_SIZE(tl_wr841n_v1_partitions),
#endif
};
-static struct ar71xx_pci_irq tl_wr841n_v1_pci_irqs[] __initdata = {
- {
- .slot = 0,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV0,
- }, {
- .slot = 1,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV1,
- }, {
- .slot = 2,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV2,
- }
-};
-
static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = {
{
.name = "tl-wr841n:green:system",
}
};
-static struct gpio_button tl_wr841n_v1_gpio_buttons[] __initdata = {
+static struct gpio_keys_button tl_wr841n_v1_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
- .code = BTN_0,
- .threshold = 5,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WR841ND_V1_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "qss",
.type = EV_KEY,
- .code = BTN_1,
- .threshold = 5,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WR841ND_V1_GPIO_BTN_QSS,
.active_low = 1,
}
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- ar71xx_set_mac_base(mac);
-
ar71xx_add_device_mdio(0x0);
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ar71xx_eth0_data.phy_mask = 0x0;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio),
tl_wr841n_v1_leds_gpio);
- ar71xx_add_device_gpio_buttons(-1, TL_WR841ND_V1_BUTTONS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr841n_v1_gpio_buttons),
- tl_wr841n_v1_gpio_buttons);
+ ar71xx_register_gpio_keys_polled(-1, TL_WR841ND_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr841n_v1_gpio_keys),
+ tl_wr841n_v1_gpio_keys);
- ar71xx_pci_init(ARRAY_SIZE(tl_wr841n_v1_pci_irqs),
- tl_wr841n_v1_pci_irqs);
+ pb42_pci_init();
}
-MIPS_MACHINE(AR71XX_MACH_TL_WR841N_V1, "TP-LINK TL-WR841N v1",
+MIPS_MACHINE(AR71XX_MACH_TL_WR841N_V1, "TL-WR841N-v1.5", "TP-LINK TL-WR841N v1",
tl_wr841n_v1_setup);