/*
- * Compex WP543 board support
+ * Compex WP543/WPJ543 board support
*
- * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* by the Free Software Foundation.
*/
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
-#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
-#include <asm/mach-ar71xx/platform.h>
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-pb42-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define WP543_GPIO_SW6 2
#define WP543_GPIO_LED_1 3
#define WP543_GPIO_LED_2 4
#define WP543_GPIO_LED_WLAN 5
#define WP543_GPIO_LED_CONN 6
#define WP543_GPIO_LED_DIAG 7
+#define WP543_GPIO_SW4 8
-static struct flash_platform_data wp543_flash_data = {
- /* TODO: add partition map */
-};
-
-static struct spi_board_info wp543_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = &wp543_flash_data,
- }
-};
-
-static struct ar71xx_pci_irq wp543_pci_irqs[] __initdata = {
- {
- .slot = 1,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV0,
- }, {
- .slot = 1,
- .pin = 2,
- .irq = AR71XX_PCI_IRQ_DEV1,
- }
-};
+#define WP543_BUTTONS_POLL_INTERVAL 20
static struct gpio_led wp543_leds_gpio[] __initdata = {
{
}
};
+static struct gpio_button wp543_gpio_buttons[] __initdata = {
+ {
+ .desc = "sw6",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .threshold = 3,
+ .gpio = WP543_GPIO_SW6,
+ }, {
+ .desc = "sw4",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .threshold = 3,
+ .gpio = WP543_GPIO_SW4,
+ }
+};
+
static void __init wp543_setup(void)
{
- ar71xx_add_device_spi(NULL, wp543_spi_info, ARRAY_SIZE(wp543_spi_info));
+ ar71xx_add_device_m25p80(NULL);
ar71xx_add_device_mdio(0xfffffff7);
- ar71xx_add_device_eth(0, PHY_INTERFACE_MODE_MII, 0x00000008);
+
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ar71xx_eth0_data.phy_mask = 0x08;
+ ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC |
+ RESET_MODULE_GE0_PHY;
+ ar71xx_add_device_eth(0);
ar71xx_add_device_usb();
- ar71xx_pci_init(ARRAY_SIZE(wp543_pci_irqs), wp543_pci_irqs);
+ pb42_pci_init();
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
wp543_leds_gpio);
+
+ ar71xx_add_device_gpio_buttons(-1, WP543_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(wp543_gpio_buttons),
+ wp543_gpio_buttons);
}
-MIPS_MACHINE(MACH_AR71XX_WP543, "Compex WP543", wp543_setup);
+MIPS_MACHINE(AR71XX_MACH_WP543, "WP543", "Compex WP543", wp543_setup);