.offset = 0,
.size = 0x040000,
.mask_flags = MTD_WRITEABLE,
- } , {
+ }, {
.name = "u-boot-env",
.offset = 0x040000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
- } , {
+ }, {
.name = "rootfs",
.offset = 0x050000,
.size = 0x610000,
- } , {
+ }, {
.name = "kernel",
.offset = 0x660000,
.size = 0x170000,
- } , {
+ }, {
.name = "configure",
.offset = 0x7d0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
- } , {
+ }, {
.name = "mfg",
.offset = 0x7e0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
- } , {
+ }, {
.name = "eeprom",
.offset = 0x7f0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
- } , {
+ }, {
.name = "firmware",
.offset = 0x050000,
.size = 0x780000,
static struct flash_platform_data zcn_1523h_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
- .parts = zcn_1523h_partitions,
- .nr_parts = ARRAY_SIZE(zcn_1523h_partitions),
+ .parts = zcn_1523h_partitions,
+ .nr_parts = ARRAY_SIZE(zcn_1523h_partitions),
#endif
};
ar71xx_add_device_m25p80(&zcn_1523h_flash_data);
ar71xx_add_device_leds_gpio(0, ARRAY_SIZE(zcn_1523h_leds_gpio),
- zcn_1523h_leds_gpio);
+ zcn_1523h_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, ZCN_1523H_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(zcn_1523h_gpio_buttons),
zcn_1523h_generic_setup();
ar71xx_add_device_leds_gpio(1, ARRAY_SIZE(zcn_1523h_2_leds_gpio),
- zcn_1523h_2_leds_gpio);
+ zcn_1523h_2_leds_gpio);
}
MIPS_MACHINE(AR71XX_MACH_ZCN_1523H_2, "ZCN-1523H-2", "Zcomax ZCN-1523H-2",
zcn_1523h_generic_setup();
ar71xx_add_device_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio),
- zcn_1523h_5_leds_gpio);
+ zcn_1523h_5_leds_gpio);
ar71xx_add_device_eth(1);
}