#include <linux/spi/flash.h>
#include <linux/routerboot.h>
#include <linux/gpio.h>
+#include <linux/version.h>
#include <asm/prom.h>
#include <asm/mach-ath79/ath79.h>
.size = (4 * 1024 * 1024) - (256 * 1024),
},
{
- .name = "rootfs",
+ .name = "ubi",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
},
.open_drain = false,
};
+static const struct ar8327_led_info rb2011_ar8327_leds[] __initconst = {
+ AR8327_LED_INFO(PHY0_0, HW, "rb:green:eth1"),
+ AR8327_LED_INFO(PHY1_0, HW, "rb:green:eth2"),
+ AR8327_LED_INFO(PHY2_0, HW, "rb:green:eth3"),
+ AR8327_LED_INFO(PHY3_0, HW, "rb:green:eth4"),
+ AR8327_LED_INFO(PHY4_0, HW, "rb:green:eth5"),
+ AR8327_LED_INFO(PHY0_1, SW, "rb:green:eth6"),
+ AR8327_LED_INFO(PHY1_1, SW, "rb:green:eth7"),
+ AR8327_LED_INFO(PHY2_1, SW, "rb:green:eth8"),
+ AR8327_LED_INFO(PHY3_1, SW, "rb:green:eth9"),
+ AR8327_LED_INFO(PHY4_1, SW, "rb:green:eth10"),
+ AR8327_LED_INFO(PHY4_2, SW, "rb:green:usr"),
+};
+
static struct ar8327_platform_data rb2011_ar8327_data = {
.pad0_cfg = &rb2011_ar8327_pad0_cfg,
.port0_cfg = {
.rxpause = 1,
},
.led_cfg = &rb2011_ar8327_led_cfg,
+ .num_leds = ARRAY_SIZE(rb2011_ar8327_leds),
+ .leds = rb2011_ar8327_leds,
};
static struct mdio_board_info rb2011_mdio0_info[] = {
ndelay(500);
}
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
static struct nand_ecclayout rb2011_nand_ecclayout = {
.eccbytes = 6,
.eccpos = { 8, 9, 10, 13, 14, 15 },
.oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
};
+#else
+
+static int rb2011_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ switch (section) {
+ case 0:
+ oobregion->offset = 8;
+ oobregion->length = 3;
+ return 0;
+ case 1:
+ oobregion->offset = 13;
+ oobregion->length = 3;
+ return 0;
+ default:
+ return -ERANGE;
+ }
+}
+
+static int rb2011_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ switch (section) {
+ case 0:
+ oobregion->offset = 0;
+ oobregion->length = 4;
+ return 0;
+ case 1:
+ oobregion->offset = 4;
+ oobregion->length = 1;
+ return 0;
+ case 2:
+ oobregion->offset = 6;
+ oobregion->length = 2;
+ return 0;
+ case 3:
+ oobregion->offset = 11;
+ oobregion->length = 2;
+ return 0;
+ default:
+ return -ERANGE;
+ }
+}
+
+static const struct mtd_ooblayout_ops rb2011_nand_ecclayout_ops = {
+ .ecc = rb2011_ooblayout_ecc,
+ .free = rb2011_ooblayout_free,
+};
+#endif /* < 4.6 */
+
static int rb2011_nand_scan_fixup(struct mtd_info *mtd)
{
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
struct nand_chip *chip = mtd->priv;
+#endif
if (mtd->writesize == 512) {
/*
* Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
* will not be able to find the kernel that we load.
*/
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
chip->ecc.layout = &rb2011_nand_ecclayout;
+#else
+ mtd_set_ooblayout(mtd, &rb2011_nand_ecclayout_ops);
+#endif
}
return 0;
rb2011_nand_init();
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_RXD_DELAY |
AR934X_ETH_CFG_SW_ONLY_MODE);
ath79_register_mdio(1, 0x0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_eth0_pll_data.pll_1000 = 0x6f000000;
ath79_register_eth(0);
MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011US, "2011US", rb2011us_setup);
+static void __init rb2011r5_setup(void)
+{
+ rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB | RB2011_FLAG_WLAN);
+}
+
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011R5, "2011r5", rb2011r5_setup);
+
static void __init rb2011g_setup(void)
{
rb2011_setup(RB2011_FLAG_SFP |