DEVICE_VARS += NETGEAR_KERNEL_MAGIC NETGEAR_BOARD_ID NETGEAR_HW_ID CMDLINE CONSOLE IMAGE_SIZE BOARDNAME LOADER_FLASH_OFFS LOADER_TYPE
include ./tp-link.mk
+include ./ubnt.mk
include ./legacy.mk
define Build/netgear-squashfs
cat "$(1)" > "$@"
endef
-# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
-# UBNT_TYPE e.g. one of (BZ, XM, XW)
-# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
-
-# mkubntimage is using the kernel image direct
-# routerboard creates partitions out of the ubnt header
-define Build/mkubntimage
- $(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
- -k $(word 1,$^) \
- -r $@ \
- -o $@
-endef
-
-# all UBNT XM device expect the kernel image to have 1024k while flash, when
-# booting the image, the size doesn't matter.
-define Build/mkubntimage-split
- dd if=$@ of=$@.old1 bs=1024k count=1
- dd if=$@ of=$@.old2 bs=1024k skip=1
- $(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
- -k $@.old1 \
- -r $@.old2 \
- -o $@
- rm $@.old1 $@.old2
-endef
-
-define Build/mkubntimage2
- $(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
- -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
- -p jffs2:0x50000:0xf60000:0:0:$@ \
- -o $@.new
- @mv $@.new $@
-endef
-
-DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE
-
define Device/Default
BOARDNAME :=
DEVICE_PROFILE = $$(BOARDNAME)
endef
TARGET_DEVICES += oolite
-# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
-# UBNT_TYPE e.g. one of (BZ, XM, XW)
-# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
-define Device/ubnt-xm
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 7552k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
- UBNT_TYPE := XM
- UBNT_BOARD := XM
- UBNT_CHIP := ar7240
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
- IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
-endef
-
-define Device/ubnt-xw
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 7552k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
- UBNT_TYPE := XW
- UBNT_BOARD := XM
- UBNT_CHIP := ar934x
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
- IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
-endef
-
-define Device/ubnt-bz
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 7552k
- MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
- UBNT_TYPE := BZ
- UBNT_BOARD := XM
- UBNT_CHIP := ar934x
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
- IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
-endef
-
-define Device/ubnt-unifiac
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 7744k
- MTDPARTS = spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs)ro,256k(cfg)ro,64k(EEPROM)ro
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
-endef
-
-define Device/rw2458n
- $(Device/ubnt-xm)
- BOARDNAME := RW2458N
-endef
-
-define Device/ubnt-airrouter
- $(Device/ubnt-xm)
- BOARDNAME := UBNT-AR
-endef
-
-define Device/ubnt-bullet-m
- $(Device/ubnt-xm)
- BOARDNAME := UBNT-BM
-endef
-
-define Device/ubnt-rocket-m
- $(Device/ubnt-xm)
- BOARDNAME := UBNT-RM
-endef
-
-define Device/ubnt-nano-m
- $(Device/ubnt-xm)
- BOARDNAME := UBNT-NM
-endef
-TARGET_DEVICES += rw2458n ubnt-airrouter ubnt-bullet-m ubnt-rocket-m ubnt-nano-m
-
-define Device/ubnt-unifi
- $(Device/ubnt-bz)
- BOARDNAME := UBNT-UF
- DEVICE_PROFILE := UBNT UBNTUNIFI
-endef
-
-define Device/ubnt-unifiac-lite
- $(Device/ubnt-unifiac)
- DEVICE_PROFILE := UBNT UBNTUNIFIACLITE
- BOARDNAME := UBNT-UF-AC-LITE
-endef
-
-define Device/ubnt-unifiac-pro
- $(Device/ubnt-unifiac)
- DEVICE_PROFILE := UBNT UBNTUNIFIACPRO
- BOARDNAME := UBNT-UF-AC-PRO
-endef
-
-define Device/ubnt-unifi-outdoor
- $(Device/ubnt-bz)
- BOARDNAME := UBNT-U20
- DEVICE_PROFILE := UBNT UBNTUNIFIOUTDOOR
-endef
-TARGET_DEVICES += ubnt-unifi ubnt-unifiac-lite ubnt-unifiac-pro ubnt-unifi-outdoor
-
-define Device/ubnt-nano-m-xw
- $(Device/ubnt-xw)
- BOARDNAME := UBNT-NM-XW
-endef
-
-define Device/ubnt-loco-m-xw
- $(Device/ubnt-xw)
- BOARDNAME := UBNT-LOCO-XW
-endef
-
-define Device/ubnt-rocket-m-xw
- $(Device/ubnt-xw)
- BOARDNAME := UBNT-RM-XW
-endef
-
-define Device/ubnt-rocket-m-ti
- $(Device/ubnt-xw)
- BOARDNAME := UBNT-RM-TI
- UBNT_TYPE := TI
- UBNT_BOARD := XM
-endef
-TARGET_DEVICES += ubnt-nano-m-xw ubnt-loco-m-xw ubnt-rocket-m-xw ubnt-rocket-m-ti
-
-define Device/ubnt-air-gateway
- $(Device/ubnt-xm)
- BOARDNAME := UBNT-AGW
- UBNT_BOARD := XM
- UBNT_TYPE := AirGW
- UBNT_CHIP := ar933x
- CONSOLE = ttyATH0,115200
-endef
-TARGET_DEVICES += ubnt-air-gateway
-
-define Device/ubnt-air-gateway-pro
- $(Device/ubnt-xm)
- BOARDNAME := UBNT-AGWP
- UBNT_TYPE := AirGWP
- UBNT_CHIP := ar934x
- CONSOLE = ttyS0,115200
-endef
-TARGET_DEVICES += ubnt-air-gateway-pro
-
-define Device/ubdev01
- $(Device/ubnt-xm)
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
- BOARDNAME := UBNT-UF
- UBNT_BOARD := UBDEV01
- UBNT_TYPE := XM
- UBNT_CHIP := ar7240
-endef
-
-TARGET_DEVICES += ubdev01
-
-define Device/ubnt-routerstation
- IMAGE_SIZE := 16128k
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/factory.bin = append-rootfs | pad-rootfs | mkubntimage
- IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
- KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE)
-endef
-
-define Device/ubnt-rs
-$(Device/ubnt-routerstation)
- BOARDNAME := UBNT-RS
- DEVICE_PROFILE := Madwifi UBNT UBNTRS
- UBNT_BOARD := RS
- UBNT_TYPE := RSx
- UBNT_CHIP := ar7100
-endef
-
-define Device/ubnt-rspro
-$(Device/ubnt-routerstation)
- BOARDNAME := UBNT-RSPRO
- DEVICE_PROFILE := Madwifi UBNT UBNTRSPRO
- UBNT_BOARD := RSPRO
- UBNT_TYPE := RSPRO
- UBNT_CHIP := ar7100pro
-endef
-
-define Device/ubnt-ls-sr71
-$(Device/ubnt-routerstation)
- BOARDNAME := UBNT-LS-SR71
- DEVICE_PROFILE := Madwifi UBNT
- UBNT_BOARD := LS-SR71
- UBNT_TYPE := LS-SR71
- UBNT_CHIP := ar7100
-endef
-
-TARGET_DEVICES += ubnt-rs ubnt-rspro ubnt-ls-sr71
-
-define Device/ubnt-uap-pro
- KERNEL_SIZE := 1536k
- IMAGE_SIZE := 15744k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
- UBNT_TYPE := BZ
- UBNT_CHIP := ar934x
- BOARDNAME := UAP-PRO
- DEVICE_PROFILE := UBNT UAPPRO
- KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage2
-endef
-
-define Device/ubnt-unifi-outdoor-plus
-$(Device/ubnt-uap-pro)
- UBNT_CHIP := ar7240
- BOARDNAME := UBNT-UOP
- DEVICE_PROFILE := UBNT
-endef
-
-TARGET_DEVICES += ubnt-uap-pro ubnt-unifi-outdoor-plus
define Device/NBG6616
BOARDNAME = NBG6616
projects / openwrt / staging / yousong.git / blobdiff