// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7241.dtsi"
+#include "ar7241_ubnt_unifi.dtsi"
/ {
compatible = "ubnt,unifi", "qca,ar7241";
model = "Ubiquiti UniFi AP";
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <40000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
-
- poll-interval = <20>;
- reset {
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
+ aliases {
+ led-boot = &led_dome_green;
+ led-failsafe = &led_dome_green;
+ led-running = &led_dome_green;
+ led-upgrade = &led_dome_green;
};
leds {
compatible = "gpio-leds";
- dome-green {
- label = "ubnt:green:dome";
+
+ led_dome_green: dome_green {
+ label = "green:dome";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
- dome-orange {
- label = "ubnt:orange:dome";
+ dome_orange {
+ label = "orange:dome";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
};
};
-&uart {
- status = "okay";
-};
-
-&pll {
- clocks = <&extosc>;
-};
-
&spi {
status = "okay";
- num-cs = <1>;
flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mx25l6405d";
+ compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
read-only;
};
- partition@1 {
+ partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
+ read-only;
};
- partition@2 {
+ partition@50000 {
+ compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0x750000>;
};
- partition@3 {
+ partition@7a0000 {
label = "board_config";
reg = <0x7a0000 0x010000>;
read-only;
};
- partition@4 {
+ partition@7b0000 {
label = "cfg";
reg = <0x7b0000 0x040000>;
read-only;
};
- art: partition@5 {
+ art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
-&pcie {
- status = "okay";
-
- ath9k@0 {
- reg = <0x0000 0 0 0 0>;
- qca,no-eeprom;
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "mii";
- };
-};
-
ð0 {
- status = "okay";
-
- mtd-mac-address = <&art 0x0>;
- phy-handle = <&phy4>;
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
};
ð1 {
- status = "okay";
+ compatible = "syscon", "simple-mfd";
+};
+
+&art {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
- compatible = "syscon";
+ macaddr_art_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
};