ath79: enable UART in SoC DTSI files

[openwrt/staging/jow.git] / target / linux / ath79 / dts / ar7242_avm_fritz300e.dts

diff --git a/target/linux/ath79/dts/ar7242_avm_fritz300e.dts b/target/linux/ath79/dts/ar7242_avm_fritz300e.dts
index fb6b0ff30eaac920f335b426eea8964061256911..310a2b1ee2a0a40bebead0a9e6537d287f2c786f 100644 (file)
--- a/target/linux/ath79/dts/ar7242_avm_fritz300e.dts
+++ b/target/linux/ath79/dts/ar7242_avm_fritz300e.dts
@@ -1,25 +1,24 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
+
+#include "ar7242.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "ar7242.dtsi"
-
 / {
        compatible = "avm,fritz300e", "qca,ar7242";
        model = "AVM FRITZ!WLAN Repeater 300E";
 
        aliases {
-               led-boot = &power;
-               led-failsafe = &power;
-               led-running = &power;
-               led-upgrade = &power;
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+               label-mac-device = &ath9k;
        };
 
-       gpio-keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
+       keys {
+               compatible = "gpio-keys";
 
                wps {
                        label = "wps";
@@ -32,19 +31,19 @@
        leds {
                compatible = "gpio-leds";
 
-               power: power {
-                       label = "fritz300e:green:power";
+               led_power: power {
+                       label = "green:power";
                        gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
 
                lan {
-                       label = "fritz300e:green:lan";
+                       label = "green:lan";
                        gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                };
 
                wlan {
-                       label = "fritz300e:green:wlan";
+                       label = "green:wlan";
                        gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0tpt";
                };
@@ -54,27 +53,27 @@
                compatible = "gpio-leds";
 
                rssi0 {
-                       label = "fritz300e:green:rssi0";
+                       label = "green:rssi0";
                        gpios = <&ath9k 10 GPIO_ACTIVE_LOW>;
                };
 
                rssi1 {
-                       label = "fritz300e:green:rssi1";
+                       label = "green:rssi1";
                        gpios = <&ath9k 4 GPIO_ACTIVE_LOW>;
                };
 
                rssi2 {
-                       label = "fritz300e:green:rssi2";
+                       label = "green:rssi2";
                        gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
                };
 
                rssi3 {
-                       label = "fritz300e:green:rssi3";
+                       label = "green:rssi3";
                        gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
                };
 
                rssi4 {
-                       label = "fritz300e:green:rssi4";
+                       label = "green:rssi4";
                        gpios = <&ath9k 5 GPIO_ACTIVE_LOW>;
                };
        };
@@ -96,7 +95,6 @@
 
 &spi {
        status = "okay";
-       num-cs = <1>;
 
        flash@0 {
                compatible = "jedec,spi-nor";
@@ -135,10 +133,6 @@
        };
 };
 
-&uart {
-       status = "okay";
-};
-
 &pcie {
        status = "okay";