treewide: dts: Remove default-state=off property from all gpio LED nodes

[openwrt/staging/wigyori.git] / target / linux / ath79 / dts / ar9331_dragino_ms14.dts

diff --git a/target/linux/ath79/dts/ar9331_dragino_ms14.dts b/target/linux/ath79/dts/ar9331_dragino_ms14.dts
index e266a6cb4fd08067ce55a5a7c73c863417b946b6..713fe4103ac327410eef2eea05f2a4e99e16f19b 100644 (file)
--- a/target/linux/ath79/dts/ar9331_dragino_ms14.dts
+++ b/target/linux/ath79/dts/ar9331_dragino_ms14.dts
@@ -20,41 +20,35 @@
                wlan {
                        label = "dragino2:red:wlan";
                        gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
                };
 
                lan {
                        label = "dragino2:red:lan";
                        gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
 
                wan {
                        label = "dragino2:red:wan";
                        gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
 
                system {
                        label = "dragino2:red:system";
                        gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
                };
        };
 
        keys {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <100>;
 
-               button@0 {
+               button0 {
                        label = "jumpstart";
                        linux,code = <KEY_WPS_BUTTON>;
                        gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
                };
 
-               button@1 {
+               button1 {
                        label = "reset";
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
@@ -89,8 +83,6 @@
 
        /* Winbond 25Q128BVFG SPI flash */
        flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "winbond,w25q128", "jedec,spi-nor";
                spi-max-frequency = <104000000>;
                reg = <0>;