// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9341.dtsi"
+#include "ar9341_tplink.dtsi"
/ {
model = "TP-Link TL-WR841N/ND v8";
compatible = "tplink,tl-wr841-v8", "qca,ar9341";
-
- aliases {
- serial0 = &uart;
- led-boot = &system;
- led-failsafe = &system;
- led-running = &system;
- led-upgrade = &system;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&jtag_disable_pins>;
-
- reset {
- label = "Reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- rfkill {
- label = "WiFi";
- linux,code = <KEY_RFKILL>;
- gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- debounce-interval = <60>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- system: power {
- label = "tp-link:green:power";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- wlan {
- label = "tp-link:green:wlan";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- qss {
- label = "tp-link:green:qss";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
-
- wan {
- label = "tp-link:green:wan";
- gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
- };
-
- lan1 {
- label = "tp-link:green:lan1";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "tp-link:green:lan2";
- gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
- };
-
- lan3 {
- label = "tp-link:green:lan3";
- gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- };
-
- lan4 {
- label = "tp-link:green:lan4";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- };
- };
};
-&ref {
- clock-frequency = <25000000>;
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
+&keys {
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
};
&spi {
};
};
};
-
-ð0 {
- status = "okay";
-
- phy-handle = <&swphy0>;
- mtd-mac-address = <&uboot 0x1fc00>;
- mtd-mac-address-increment = <(-1)>;
-};
-
-ð1 {
- status = "okay";
-
- mtd-mac-address = <&uboot 0x1fc00>;
-
- pll-data = <0x06000000 0x00000101 0x00001616>;
-
- gmac-config {
- device = <&gmac>;
- switch-phy-swap = <1>;
- };
-};
-
-&wmac {
- status = "okay";
-
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&uboot 0x1fc00>;
-};