-/dts-v1/;
+#include "qca953x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include "qca953x.dtsi"
-
/ {
aliases {
led-boot = &led_status;
};
};
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
leds {
compatible = "gpio-leds";
// Colors for non-Lite versions
led_status: status {
- label = "gl-ar300m:green:status";
+ label = "green:status";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
- led_lan: lan {
- label = "gl-ar300m:green:lan";
+ lan {
+ label = "green:lan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_wlan: wlan {
- label = "gl-ar300m:red:wlan";
+ label = "red:wlan";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
i2c: i2c {
compatible = "i2c-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio17>;
+
sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
};
&spi {
status = "okay";
- num-cs = <2>;
- cs-gpios = <0>, <0>;
-
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
};
};
-&uart {
- status = "okay";
-};
-
&usb0 {
#address-cells = <1>;
#size-cells = <0>;
+ vbus-supply = <®_usb_vbus>;
status = "okay";
};
ð0 {
status = "okay";
- mtd-mac-address = <&art 0x0>;
+
phy-handle = <&swphy4>;
+
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
};
ð1 {
- mtd-mac-address = <&art 0x0>;
- mtd-mac-address-increment = <1>;
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
};
+
+&art {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+};
+
+&pinmux {
+ enable_gpio17: pinmux_enable_gpio17 {
+ pinctrl-single,bits = <0x10 0x0000 0xff00>;
+ };
+};