ath79: create common DTSI for ECB1200 and ECB1750

[openwrt/staging/jow.git] / target / linux / ath79 / dts / qca9557_engenius_ecb1200.dts

diff --git a/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts b/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts
index ee46cd79e70fd522e1b98aa528027f4e68706cf3..955f17f0f36453c7b3f1be073a1cf8ecaab83679 100644 (file)
--- a/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts
+++ b/target/linux/ath79/dts/qca9557_engenius_ecb1200.dts
@@ -1,140 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qca955x.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "qca955x_engenius_ecb1xxx.dtsi"
 
 / {
        compatible = "engenius,ecb1200", "qca,qca9557";
        model = "EnGenius ECB1200";
-
-       aliases {
-               led-boot = &led_power;
-               led-failsafe = &led_power;
-               led-running = &led_power;
-               led-upgrade = &led_power;
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       debounce-interval = <60>;
-                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led_power: power {
-                       label = "amber:power";
-                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-                       default-state = "on";
-               };
-
-               wifi2g {
-                       label = "blue:wifi2g";
-                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy1tpt";
-               };
-
-               wifi5g {
-                       label = "blue:wifi5g";
-                       gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy0tpt";
-               };
-       };
-};
-
-&uart {
-       status = "okay";
-};
-
-&spi {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <40000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x040000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "u-boot-env";
-                               reg = <0x040000 0x010000>;
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x050000 0xf50000>;
-                       };
-
-                       partition@fa0000 {
-                               label = "userconfig";
-                               reg = <0xfa0000 0x050000>;
-                               read-only;
-                       };
-
-                       partition@ff0000 {
-                               label = "art";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&mdio0 {
-       status = "okay";
-
-       phy5: ethernet-phy@5 {
-               reg = <5>;
-               eee-broken-100tx;
-               eee-broken-1000t;
-       };
-};
-
-&eth0 {
-       status = "okay";
-
-       phy-handle = <&phy5>;
-       phy-mode = "rgmii-id";
-
-       pll-data = <0x82000000 0x80000101 0x80001313>;
-
-       gmac-config {
-               device = <&gmac>;
-               rgmii-enabled = <1>;
-       };
-};
-
-&pcie0 {
-       status = "okay";
-
-       wifi@0,0,0 {
-               compatible = "qcom,ath10k";
-               reg = <0x0 0 0 0 0>;
-               qca,no-eeprom;
-       };
-};
-
-&wmac {
-       status = "okay";
-
-       qca,no-eeprom;
 };