ath79: convert ath10k pre-calibration data to NVMEM (binary MAC)

[openwrt/staging/jow.git] / target / linux / ath79 / dts / qca9561_tplink_archer-c59-v2.dts

diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c59-v2.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c59-v2.dts
index e70afbffd9d41f71c260a966fd7eb5c7155a863e..8a93d2b3b14c981b81e7b51a8848b7976e01763c 100644 (file)
--- a/target/linux/ath79/dts/qca9561_tplink_archer-c59-v2.dts
+++ b/target/linux/ath79/dts/qca9561_tplink_archer-c59-v2.dts
@@ -1,40 +1,44 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
 
 #include "qca9561_tplink_archer-c5x.dtsi"
 
 / {
        compatible = "tplink,archer-c59-v2", "qca,qca9560";
        model = "TP-Link Archer C59 v2";
+
+       aliases {
+               label-mac-device = &eth1;
+       };
 };
 
 &leds {
        usb     {
-               label = "tp-link:green:usb";
+               label = "green:usb";
                gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
                linux,default-trigger = "usbport";
-               trigger-sources = <&hub_port>;
+               trigger-sources = <&hub_port0>;
        };
 };
 
 &usb0 {
-       #address-cells = <1>;
-       #size-cells = <0>;
        status = "okay";
-
-       hub_port: port@1 {
-               reg = <1>;
-               #trigger-source-cells = <0>;
-       };
 };
 
 &usb_phy0 {
        status = "okay";
 };
 
+&pcie {
+       wifi@0,0 {
+               compatible = "qcom,ath10k";
+               reg = <0x0000 0 0 0 0>;
+               nvmem-cells = <&precal_art_5000>, <&macaddr_info_8 (-1)>;
+               nvmem-cell-names = "pre-calibration", "mac-address";
+       };
+};
+
 &spi {
        status = "okay";
-       num-cs = <1>;
 
        flash@0 {
                compatible = "jedec,spi-nor";
@@ -58,10 +62,22 @@
                                read-only;
                        };
 
-                       mac: partition@30000 {
-                               label = "mac";
+                       info: partition@30000 {
+                               label = "info";
                                reg = <0x030000 0x010000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       macaddr_info_8: macaddr@8 {
+                                               compatible = "mac-base";
+                                               reg = <0x8 0x6>;
+                                               #nvmem-cell-cells = <1>;
+                                       };
+                               };
                        };
 
                        partition@40000 {
@@ -80,7 +96,34 @@
                                label = "art";
                                reg = <0xff0000 0x010000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       precal_art_5000: pre-calibration@5000 {
+                                               reg = <0x5000 0x2f20>;
+                                       };
+                               };
                        };
                };
        };
 };
+
+&eth0 {
+       nvmem-cells = <&macaddr_info_8 1>;
+       nvmem-cell-names = "mac-address";
+};
+
+&eth1 {
+       nvmem-cells = <&macaddr_info_8 0>;
+       nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+       mtd-cal-data = <&art 0x1000>;
+
+       nvmem-cells = <&macaddr_info_8 0>;
+       nvmem-cell-names = "mac-address";
+};