ath79: Create shared dtsi for DIR-859

[openwrt/staging/ldir.git] / target / linux / ath79 / dts / qca9563_dlink_dir-859-a1.dts

diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts b/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
index 140f0b65c6013a2a12558967d45a1bb0a1bee89b..a828f86cb16e43cc18acac591a2ca3fab965677d 100644 (file)
--- a/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts
@@ -1,9 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qca956x.dtsi"
-
+#include "qca9563_dlink_dir-8x9-a1.dtsi"
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
 
 / {
        model = "D-Link DIR-859 A1";
@@ -40,113 +38,4 @@
                        linux,default-trigger = "phy0tpt";
                };
        };
-
-       keys {
-               compatible = "gpio-keys";
-
-               wps {
-                       linux,code = <KEY_WPS_BUTTON>;
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-       };
-};
-
-&pcie {
-       status = "okay";
-};
-
-&spi {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <50000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "bootloader";
-                               reg = <0x000000 0x40000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "bdcfg";
-                               reg = <0x040000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               label = "devdata";
-                               reg = <0x050000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@60000 {
-                               label = "devconf";
-                               reg = <0x060000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@70000 {
-                               compatible = "seama";
-                               label = "firmware";
-                               reg = <0x070000 0xf80000>;
-                       };
-
-                       art: partition@ff0000 {
-                               label = "art";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&mdio0 {
-       status = "okay";
-
-       phy0: ethernet-phy@0 {
-               reg = <0>;
-               phy-mode = "sgmii";
-               qca,mib-poll-interval = <500>;
-
-               reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-
-               qca,ar8327-initvals = <
-                       0x04 0x00080080 /* PORT0 PAD MODE CTRL */
-                       0x10 0x81000080 /* POWER_ON_STRAP */
-                       0x50 0xcc35cc35 /* LED_CTRL0 */
-                       0x54 0xcb37cb37 /* LED_CTRL1 */
-                       0x58 0x00000000 /* LED_CTRL2 */
-                       0x5c 0x00f3cf00 /* LED_CTRL3 */
-                       0x7c 0x0000007e /* PORT0_STATUS */
-                       >;
-       };
-};
-
-&eth0 {
-       status = "okay";
-
-       pll-data = <0x03000101 0x00000101 0x00001919>;
-
-       phy-mode = "sgmii";
-       phy-handle = <&phy0>;
-};
-
-&wmac {
-       status = "okay";
-
-       qca,no-eeprom;
 };