ath79: set mib-poll-interval on mdio0 attached ar83xx switch
[openwrt/staging/dedeckeh.git] / target / linux / ath79 / dts / qca9563_tplink_re450-v2.dts
index 852f1c9784d92774b56fbb29b557c9f585ba9a88..ad55a55e560897b85589a075b2b256a9c7080e7c 100644 (file)
        };
 
        aliases {
-               led-status = &system;
+               led-boot = &system;
+               led-failsafe = &system;
+               led-running = &system;
+               led-upgrade = &system;
                mdio-gpio0 = &mdio2;
        };
 
                wlan2g {
                        label = "tp-link:blue:wlan2g";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                        linux,default-trigger = "phy1tpt";
                };
 
                wlan5g {
                        label = "tp-link:blue:wlan5g";
                        gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                        linux,default-trigger = "phy0tpt";
                };
 
                lan_link {
                        label = "tp-link:green:lan_link";
                        gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
 
                lan_data {
                        label = "tp-link:green:lan_data";
                        gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
                };
 
                wps_blue {
                        label = "tp-link:blue:wps";
                        gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
                };
 
                wps_red {
                        label = "tp-link:red:wps";
                        gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
                };
        };
 
                        };
 
                        partition@20000 {
+                               compatible = "tplink,firmware";
                                label = "firmware";
                                reg = <0x020000 0x5e0000>;
                        };