ath79: add support for TP-Link TL-WPA8630 v1

[openwrt/staging/chunkeey.git] / target / linux / ath79 / dts / qca9563_tplink_tl-wpa8630p-v2.dtsi

diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi
index 16c055b6d7f28cc825cc141ac962274699eb0676..97eeb45d6572570fc29e7a9be01dce951d7afded 100644 (file)
--- a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi
@@ -1,45 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca956x.dtsi"
+#include "qca9563_tplink_tl-wpa8630.dtsi"
 
 / {
        aliases {
-               led-boot = &led_power;
-               led-failsafe = &led_power;
-               led-running = &led_power;
-               led-upgrade = &led_power;
                label-mac-device = &eth0;
        };
 
-       leds {
-               compatible = "gpio-leds";
-
-               led_power: power {
-                       label = "tp-link:green:power";
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-               };
-
-               wifi2g {
-                       label = "tp-link:green:wifi2g";
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy1tpt";
-               };
-
-               wifi5g {
-                       label = "tp-link:green:wifi5g";
-                       gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy0tpt";
-               };
-
-               lan {
-                       label = "tp-link:green:lan";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-       };
-
        gpio-export {
                compatible = "gpio-export";
 
@@ -48,118 +15,47 @@
                        gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
                };
        };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "Reset button";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-
-               pair {
-                       label = "Pair button";
-                       linux,code = <BTN_1>;
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-
-               leds {
-                       label = "LED control button";
-                       linux,code = <BTN_0>;
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "WPS button";
-                       linux,code = <KEY_WPS_BUTTON>;
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-       };
 };
 
-&spi {
-       status = "okay";
-
-       num-cs = <1>;
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions: partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "factory-uboot";
-                               reg = <0x000000 0x020000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "u-boot";
-                               reg = <0x020000 0x020000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               compatible = "tplink,firmware";
-                               label = "firmware";
-                               reg = <0x040000 0x5e0000>;
-                       };
-
-                       partition@620000 {
-                               label = "partition-table";
-                               reg = <0x620000 0x010000>;
-                               read-only;
-                       };
-               };
+&keys {
+       wps {
+               label = "WPS button";
+               linux,code = <KEY_WPS_BUTTON>;
+               gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+               debounce-interval = <60>;
        };
 };
 
-&pcie {
-       status = "okay";
-};
-
-&uart {
-       status = "okay";
-};
-
-&mdio0 {
-       status = "okay";
+&partitions {
+       partition@0 {
+               label = "factory-uboot";
+               reg = <0x000000 0x020000>;
+               read-only;
+       };
 
-       phy-mask = <0>;
+       partition@20000 {
+               label = "u-boot";
+               reg = <0x020000 0x020000>;
+               read-only;
+       };
 
-       phy0: ethernet-phy@0 {
-               reg = <0>;
-               phy-mode = "sgmii";
-               qca,mib-poll-interval = <500>;
+       partition@40000 {
+               compatible = "tplink,firmware";
+               label = "firmware";
+               reg = <0x040000 0x5e0000>;
+       };
 
-               qca,ar8327-initvals = <
-                       0x04 0x00080080 /* PORT0 PAD MODE CTRL */
-                       0x7c 0x0000007e /* PORT0_STATUS */
-               >;
+       partition@620000 {
+               label = "partition-table";
+               reg = <0x620000 0x010000>;
+               read-only;
        };
 };
 
 &eth0 {
-       status = "okay";
-
-       phy-handle = <&phy0>;
-       phy-mode = "sgmii";
        mtd-mac-address = <&mac 0x8>;
 };
 
 &wmac {
-       status = "okay";
-
-       mtd-cal-data = <&art 0x1000>;
        mtd-mac-address = <&mac 0x8>;
 };