ath79: add support for D-Link DCH-G020 Rev. A1

[openwrt/staging/dedeckeh.git] / target / linux / ath79 / generic / base-files / etc / board.d / 02_network

diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 4b74565aa325e341830aa1c3d5f96fabc524865a..4580f3ab4e72bdfa9a5b07ba72151eeac3a1c056 100755 (executable)
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -108,6 +108,7 @@ ath79_setup_interfaces()
        comfast,cf-e110n-v2|\
        comfast,cf-e120a-v3|\
        comfast,cf-e314n-v2|\
+       compex,wpj531-16m|\
        tplink,cpe210-v1|\
        tplink,cpe220-v2|\
        tplink,cpe220-v3|\
@@ -130,6 +131,10 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
                ;;
+       compex,wpj344-16m)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "3:lan" "2:wan"
+               ;;
        devolo,dvl1200e|\
        devolo,dvl1750e|\
        ocedo,ursus)
@@ -142,6 +147,10 @@ ath79_setup_interfaces()
        dlink,dap-2695-a1)
                ucidef_add_switch "switch0" "0@eth0" "2:lan" "3:wan" "6@eth1"
                ;;
+       dlink,dch-g020-a1)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan:2" "2:lan:1"
+               ;;
        dlink,dir-825-b1)
                ucidef_set_interface_wan "eth1"
                ucidef_add_switch "switch0" \
@@ -365,12 +374,19 @@ ath79_setup_macs()
                lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
                wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)"))
                ;;
+       compex,wpj344-16m)
+               wan_mac=$(mtd_get_mac_binary u-boot 0x2e018)
+               ;;
        devolo,magic-2-wifi)
                label_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" 3)
                ;;
        dlink,dap-2695-a1)
                label_mac=$(mtd_get_mac_ascii bdcfg "wlanmac")
                ;;
+       dlink,dch-g020-a1)
+               lan_mac=$(mtd_get_mac_text "mp" 0x1)
+               label_mac=$lan_mac
+               ;;
        dlink,dir-825-b1)
                lan_mac=$(mtd_get_mac_text "caldata" 0xffa0)
                wan_mac=$(mtd_get_mac_text "caldata" 0xffb4)