ath79: convert Engenius EPG5000 radios to nvmem-cells

[openwrt/staging/aparcar.git] / target / linux / ath79 / generic / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 109b33795ad6ad14603475d032d34009d0ee152b..4db311fde0abb4f5426a9c1ad194809d5dbf374c 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -11,12 +11,15 @@ case "$FIRMWARE" in
 "ath10k/cal-pci-0000:00:00.0.bin")
        case $board in
        allnet,all-wap02860ac|\
-       engenius,eap1200h|\
+       araknis,an-500-ap-i-ac|\
+       araknis,an-700-ap-i-ac|\
        engenius,enstationac-v1|\
-       glinet,gl-x750)
+       glinet,gl-x750|\
+       watchguard,ap300)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 2)
                ;;
+       asus,pl-ac56|\
        asus,rp-ac66|\
        comfast,cf-wr650ac-v1|\
        comfast,cf-wr650ac-v2|\
@@ -27,7 +30,11 @@ case "$FIRMWARE" in
        qxwlan,e1700ac-v2-16m|\
        qxwlan,e600gac-v2-8m|\
        qxwlan,e600gac-v2-16m|\
-       ubnt,aircube-ac|\
+       sophos,ap15|\
+       sophos,ap55|\
+       sophos,ap55c|\
+       sophos,ap100|\
+       sophos,ap100c|\
        ubnt,bullet-ac|\
        ubnt,unifiac-lite|\
        ubnt,unifiac-lr|\
@@ -37,13 +44,15 @@ case "$FIRMWARE" in
        ubnt,litebeam-ac-gen2|\
        ubnt,nanobeam-ac|\
        ubnt,nanobeam-ac-gen2|\
+       ubnt,nanobeam-ac-xc|\
        ubnt,nanostation-ac|\
        ubnt,nanostation-ac-loco|\
        ubnt,powerbeam-5ac-500|\
        ubnt,powerbeam-5ac-gen2|\
        ubnt,rocket-5ac-lite|\
        ubnt,unifiac-pro|\
-       yuncore,a770)
+       yuncore,a770|\
+       yuncore,xd3200)
                caldata_extract "art" 0x5000 0x844
                ;;
        avm,fritz1750e|\
@@ -59,40 +68,34 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
                ;;
-       dlink,dap-2660-a1|\
-       dlink,dap-2695-a1|\
-       dlink,dap-3662-a1)
-               caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
-               ;;
        dlink,dir-859-a1)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
                ;;
-       elecom,wrc-1750ghbk2-i)
-               caldata_extract "art" 0x5000 0x844
-               ;;
        engenius,ecb1200|\
        engenius,ecb1750)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
                ;;
-       engenius,epg5000|\
-       iodata,wn-ac1167dgr|\
-       iodata,wn-ac1600dgr2|\
-       sitecom,wlr-7100|\
-       zyxel,nbg6616)
-               caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 1)
-               ;;
        engenius,ews511ap)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) 1)
                ;;
+       extreme-networks,ws-ap3805i)
+               caldata_extract "art" 0x5000 0x844
+               ath10k_patch_mac $(mtd_get_mac_ascii cfg1 RADIOADDR0)
+               ;;
        glinet,gl-ar750)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 1)
                ;;
+       iodata,wn-ac1167dgr|\
+       iodata,wn-ac1600dgr2|\
+       sitecom,wlr-7100|\
+       zyxel,nbg6616)
+               caldata_extract "art" 0x5000 0x844
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 1)
+               ;;
        nec,wg800hp)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(mtd_get_mac_text board_data 0x880)
@@ -137,14 +140,6 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfs 0xf100) 2)
                ;;
-       tplink,eap225-v1|\
-       tplink,eap245-v1|\
-       tplink,re450-v2|\
-       tplink,re450-v3|\
-       tplink,re455-v1)
-               caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
-               ;;
        tplink,re350k-v1)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 2)
@@ -154,6 +149,12 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
                ;;
+       tplink,re450-v2|\
+       tplink,re450-v3|\
+       tplink,re455-v1)
+               caldata_extract "art" 0x5000 0x844
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
+               ;;
        tplink,tl-wpa8630-v1)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) 1)
@@ -174,6 +175,13 @@ case "$FIRMWARE" in
        ;;
 "ath10k/pre-cal-pci-0000:00:00.0.bin")
        case $board in
+       asus,rp-ac51|\
+       yuncore,a782|\
+       yuncore,xd4200)
+               caldata_extract "art" 0x5000 0x2f20
+               ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+                       /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+               ;;
        comfast,cf-e313ac)
                caldata_extract "art" 0x5000 0x2f20
                ath10k_patch_mac $(mtd_get_mac_binary art 0x6)
@@ -191,12 +199,6 @@ case "$FIRMWARE" in
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
                ;;
-       dlink,dap-2680-a1)
-               caldata_extract "art" 0x5000 0x2f20
-               ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
-               ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-                       /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-               ;;
        dlink,dir-842-c1|\
        dlink,dir-842-c2|\
        dlink,dir-842-c3)
@@ -213,11 +215,6 @@ case "$FIRMWARE" in
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
-       netgear,ex6400|\
-       netgear,ex7300)
-               caldata_extract "caldata" 0x5000 0x2f20
-               ath10k_patch_mac $(mtd_get_mac_binary caldata 0xc)
-               ;;
        phicomm,k2t)
                caldata_extract "art" 0x5000 0x2f20
                ath10k_patch_mac $(k2t_get_mac "5g_mac")
@@ -244,29 +241,21 @@ case "$FIRMWARE" in
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
-       tplink,eap225-outdoor-v1|\
-       tplink,eap225-v3|\
-       tplink,eap225-wall-v2|\
-       tplink,tl-wpa8630p-v2-int|\
-       tplink,tl-wpa8630p-v2.0-eu|\
-       tplink,tl-wpa8630p-v2.1-eu)
+       xiaomi,aiot-ac2350)
                caldata_extract "art" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-                       /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-               ;;
-       tplink,eap245-v3)
-               caldata_extract "art" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
+                       /lib/firmware/ath10k/QCA9984/hw1.0/board.bin
                ;;
-       xiaomi,aiot-ac2350)
+       tplink,deco-m4r-v1)
                caldata_extract "art" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x8) -1)
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-                       /lib/firmware/ath10k/QCA9984/hw1.0/board.bin
+                       /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
-       yuncore,a782|\
-       yuncore,xd4200)
+       tplink,deco-s4-v2)
                caldata_extract "art" 0x5000 0x2f20
+               base_mac=$(mtd_get_mac_encrypted_deco $(find_mtd_part config))
+               ath10k_patch_mac $(macaddr_add $base_mac 2)
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;