ath79: Add support for OpenMesh A40

[openwrt/staging/hauke.git] / target / linux / ath79 / generic / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index d1a47676482759512ab46d3cb692d9f5ec839f03..a7986a98ecb6f4287dec4f9ea47811d51fb8a46b 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -11,6 +11,7 @@ case "$FIRMWARE" in
 "ath10k/cal-pci-0000:00:00.0.bin")
        case $board in
        allnet,all-wap02860ac|\
+       engenius,eap1200h|\
        engenius,enstationac-v1|\
        glinet,gl-x750)
                caldata_extract "art" 0x5000 0x844
@@ -55,7 +56,8 @@ case "$FIRMWARE" in
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
                ;;
        dlink,dap-2660-a1|\
-       dlink,dap-2695-a1)
+       dlink,dap-2695-a1|\
+       dlink,dap-3662-a1)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
                ;;
@@ -96,7 +98,10 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(mtd_get_mac_binary art 0xc)
                ;;
-       openmesh,mr1750-v1)
+       openmesh,a40|\
+       openmesh,a60|\
+       openmesh,mr1750-v1|\
+       openmesh,mr1750-v2)
                caldata_extract "ART" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
                ;;
@@ -170,6 +175,7 @@ case "$FIRMWARE" in
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
                ;;
+       comfast,cf-e375ac|\
        comfast,cf-e560ac|\
        comfast,cf-ew72|\
        comfast,cf-wr752ac-v1)