ath79: TP-Link EAP225-Wall v1: convert radios to nvmem-cells

[openwrt/staging/nbd.git] / target / linux / ath79 / generic / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 17121d961868f79012367c0e8a2292376a7f54d1..cb4a5797ec31457a777264ca16849f624f39f626 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -29,6 +29,10 @@ case "$FIRMWARE" in
        qxwlan,e1700ac-v2-16m|\
        qxwlan,e600gac-v2-8m|\
        qxwlan,e600gac-v2-16m|\
+       sophos,ap55|\
+       sophos,ap55c|\
+       sophos,ap100|\
+       sophos,ap100c|\
        ubnt,aircube-ac|\
        ubnt,bullet-ac|\
        ubnt,unifiac-lite|\
@@ -141,14 +145,6 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfs 0xf100) 2)
                ;;
-       tplink,eap225-v1|\
-       tplink,eap245-v1|\
-       tplink,re450-v2|\
-       tplink,re450-v3|\
-       tplink,re455-v1)
-               caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
-               ;;
        tplink,re350k-v1)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 2)
@@ -158,6 +154,12 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
                ;;
+       tplink,re450-v2|\
+       tplink,re450-v3|\
+       tplink,re455-v1)
+               caldata_extract "art" 0x5000 0x844
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
+               ;;
        tplink,tl-wpa8630-v1)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) 1)
@@ -248,22 +250,16 @@ case "$FIRMWARE" in
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
-       tplink,eap225-outdoor-v1|\
-       tplink,eap225-v3|\
-       tplink,eap225-wall-v2)
+       xiaomi,aiot-ac2350)
                caldata_extract "art" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-                       /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-               ;;
-       tplink,eap245-v3)
-               caldata_extract "art" 0x5000 0x2f20
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
+                       /lib/firmware/ath10k/QCA9984/hw1.0/board.bin
                ;;
-       xiaomi,aiot-ac2350)
+       tplink,deco-m4r-v1)
                caldata_extract "art" 0x5000 0x2f20
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x8) -1)
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-                       /lib/firmware/ath10k/QCA9984/hw1.0/board.bin
+                       /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
        yuncore,a782|\
        yuncore,xd4200)