ath79: add support for D-Link DAP-2660 A1

[openwrt/staging/dedeckeh.git] / target / linux / ath79 / generic / base-files / etc / hotplug.d / firmware / 11-ath10k-caldata

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 1e205468b7a057c45b637fcd5beda75b8605e6ac..e492c5f54218fee4c3f900f36123fd1ff3bb53ab 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -26,6 +26,7 @@ case "$FIRMWARE" in
        qxwlan,e1700ac-v2-16m|\
        qxwlan,e600gac-v2-8m|\
        qxwlan,e600gac-v2-16m|\
+       ubnt,aircube-ac|\
        ubnt,unifiac-lite|\
        ubnt,unifiac-lr|\
        ubnt,unifiac-mesh|\
@@ -33,6 +34,7 @@ case "$FIRMWARE" in
        ubnt,lap-120|\
        ubnt,litebeam-ac-gen2|\
        ubnt,nanobeam-ac|\
+       ubnt,nanobeam-ac-gen2|\
        ubnt,nanostation-ac|\
        ubnt,nanostation-ac-loco|\
        ubnt,powerbeam-5ac-500|\
@@ -50,6 +52,7 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
                ;;
+       dlink,dap-2660-a1|\
        dlink,dap-2695-a1)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
@@ -61,6 +64,7 @@ case "$FIRMWARE" in
        elecom,wrc-1750ghbk2-i)
                caldata_extract "art" 0x5000 0x844
                ;;
+       engenius,ecb1200|\
        engenius,ecb1750)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
@@ -108,7 +112,8 @@ case "$FIRMWARE" in
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
                ;;
        tplink,archer-c5-v1|\
-       tplink,archer-c7-v2)
+       tplink,archer-c7-v2|\
+       tplink,tl-wdr7500-v3)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
                ;;
@@ -121,6 +126,12 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfs 0xf100) +2)
                ;;
+       tplink,eap245-v1|\
+       tplink,re450-v2|\
+       tplink,re450-v3)
+               caldata_extract "art" 0x5000 0x844
+               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
+               ;;
        tplink,re350k-v1)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +2)
@@ -130,11 +141,6 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
                ;;
-       tplink,re450-v2|\
-       tplink,re450-v3)
-               caldata_extract "art" 0x5000 0x844
-               ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
-               ;;
        tplink,tl-wpa8630-v1)
                caldata_extract "art" 0x5000 0x844
                ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) +1)
@@ -206,6 +212,8 @@ case "$FIRMWARE" in
                ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
                        /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
                ;;
+       tplink,eap225-outdoor-v1|\
+       tplink,eap225-v3|\
        tplink,eap225-wall-v2|\
        tplink,tl-wpa8630p-v2-int|\
        tplink,tl-wpa8630p-v2.0-eu|\