-DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE
+DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION UBNT_REVISION
+
+# On M (XW) devices the U-Boot as of version 1.1.4-s1039 doesn't like
+# VERSION_DIST being on the place of major(?) version number, so we need to
+# use some number.
+UBNT_REVISION := $(VERSION_DIST)-$(REVISION)
# mkubntimage is using the kernel image direct
# routerboard creates partitions out of the ubnt header
define Build/mkubntimage
- -$(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
- -k $(IMAGE_KERNEL) \
- -r $@ \
- -o $@
+ -$(STAGING_DIR_HOST)/bin/mkfwimage -B $(UBNT_BOARD) \
+ -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
+ -k $(IMAGE_KERNEL) -r $@ -o $@
+endef
+
+define Build/mkubntimage2
+ -$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
+ -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
+ -p jffs2:0x50000:0xf60000:0:0:$@ \
+ -o $@.new
+ @mv $@.new $@
endef
-# all UBNT XM device expect the kernel image to have 1024k while flash, when
+# all UBNT XM/WA devices expect the kernel image to have 1024k while flash, when
# booting the image, the size doesn't matter.
define Build/mkubntimage-split
-[ -f $@ ] && ( \
dd if=$@ of=$@.old1 bs=1024k count=1; \
dd if=$@ of=$@.old2 bs=1024k skip=1; \
- $(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
- -k $@.old1 \
- -r $@.old2 \
- -o $@; \
+ $(STAGING_DIR_HOST)/bin/mkfwimage -B $(UBNT_BOARD) \
+ -v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(UBNT_REVISION) \
+ -k $@.old1 -r $@.old2 -o $@; \
rm $@.old1 $@.old2 )
endef
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
# UBNT_TYPE e.g. one of (BZ, XM, XW)
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
+# UBNT_VERSION e.g. one of (6.0.0, 8.5.3)
define Device/ubnt
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2
- IMAGE_SIZE := 7552k
- UBNT_BOARD := XM
+ DEVICE_VENDOR := Ubiquiti
+ DEVICE_PACKAGES := kmod-usb2
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | mkubntimage-split
+ append-rootfs | pad-rootfs | check-size | mkubntimage-split
+endef
+
+define Device/ubnt-bz
+ $(Device/ubnt)
+ SOC := ar7241
+ IMAGE_SIZE := 7448k
+ UBNT_BOARD := XM
+ UBNT_CHIP := ar7240
+ UBNT_TYPE := BZ
+ UBNT_VERSION := 6.0.0
+endef
+
+define Device/ubnt-sw
+ $(Device/ubnt)
+ SOC := ar7242
+ DEVICE_PACKAGES += kmod-usb-ohci
+ IMAGE_SIZE := 7552k
+ UBNT_BOARD := SW
+ UBNT_CHIP := ar7240
+ UBNT_TYPE := SW
+ UBNT_VERSION := 1.4.1
+ KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
+endef
+
+define Device/ubnt-2wa
+ $(Device/ubnt)
+ SOC := ar9342
+ IMAGE_SIZE := 15744k
+ UBNT_BOARD := WA
+ UBNT_CHIP := ar934x
+ UBNT_TYPE := 2WA
+ UBNT_VERSION := 8.5.3
+endef
+
+define Device/ubnt-wa
+ $(Device/ubnt)
+ SOC := ar9342
+ IMAGE_SIZE := 15744k
+ UBNT_BOARD := WA
+ UBNT_CHIP := ar934x
+ UBNT_TYPE := WA
+ UBNT_VERSION := 8.5.3
+endef
+
+define Device/ubnt-xc
+ $(Device/ubnt)
+ IMAGE_SIZE := 15744k
+ UBNT_BOARD := XC
+ UBNT_CHIP := qca955x
+ UBNT_TYPE := XC
+ UBNT_VERSION := 8.5.3
endef
define Device/ubnt-xm
$(Device/ubnt)
+ DEVICE_VARIANT := XM
DEVICE_PACKAGES += kmod-usb-ohci
- UBNT_TYPE := XM
+ IMAGE_SIZE := 7448k
+ UBNT_BOARD := XM
UBNT_CHIP := ar7240
- ATH_SOC := ar7241
+ UBNT_REVISION := 42.$(UBNT_REVISION)
+ UBNT_TYPE := XM
+ UBNT_VERSION := 6.0.0
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
endef
-define Device/ubnt-bz
+define Device/ubnt-xw
+ $(Device/ubnt)
+ SOC := ar9342
+ DEVICE_VARIANT := XW
+ IMAGE_SIZE := 7552k
+ UBNT_BOARD := XM
+ UBNT_CHIP := ar934x
+ UBNT_REVISION := 42.$(UBNT_REVISION)
+ UBNT_TYPE := XW
+ UBNT_VERSION := 6.0.4
+endef
+
+define Device/ubnt-unifi-jffs2
$(Device/ubnt)
+ KERNEL_SIZE := 3072k
+ IMAGE_SIZE := 15744k
UBNT_TYPE := BZ
- UBNT_CHIP := ar7240
- ATH_SOC := ar7241
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | jffs2 kernel0
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs |\
+ pad-rootfs | check-size | append-metadata
+ IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2
+endef
+
+define Device/ubnt-acb
+ $(Device/ubnt)
+ IMAGE_SIZE := 15744k
+ UBNT_BOARD := ACB
+ UBNT_TYPE := ACB
+ UBNT_VERSION := 2.5.0
+endef
+
+define Device/ubnt_aircube-ac
+ $(Device/ubnt-acb)
+ SOC := ar9342
+ DEVICE_MODEL := airCube AC
+ UBNT_CHIP := ar9342
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += ubnt_aircube-ac
+
+define Device/ubnt_aircube-isp
+ $(Device/ubnt-acb)
+ SOC := qca9533
+ DEVICE_MODEL := airCube ISP
+ UBNT_CHIP := qca9533
+ SUPPORTED_DEVICES += ubnt,acb-isp
+endef
+TARGET_DEVICES += ubnt_aircube-isp
+
+define Device/ubnt_airrouter
+ $(Device/ubnt-xm)
+ SOC := ar7241
+ DEVICE_MODEL := AirRouter
+ SUPPORTED_DEVICES += airrouter
+endef
+TARGET_DEVICES += ubnt_airrouter
+
+define Device/ubnt_bullet-ac
+ $(Device/ubnt-2wa)
+ DEVICE_MODEL := Bullet AC
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
endef
+TARGET_DEVICES += ubnt_bullet-ac
-define Device/ubnt_bullet-m
+define Device/ubnt_bullet-m-ar7240
$(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Bullet-M
+ SOC := ar7240
+ DEVICE_MODEL := Bullet M
+ DEVICE_VARIANT := XM (AR7240)
+ DEVICE_PACKAGES += rssileds
SUPPORTED_DEVICES += bullet-m
endef
-TARGET_DEVICES += ubnt_bullet-m
+TARGET_DEVICES += ubnt_bullet-m-ar7240
+
+define Device/ubnt_bullet-m-ar7241
+ $(Device/ubnt-xm)
+ SOC := ar7241
+ DEVICE_MODEL := Bullet M
+ DEVICE_VARIANT := XM (AR7241)
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += bullet-m ubnt,bullet-m
+endef
+TARGET_DEVICES += ubnt_bullet-m-ar7241
+
+define Device/ubnt_bullet-m-xw
+ $(Device/ubnt-xw)
+ DEVICE_MODEL := Bullet M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += bullet-m-xw
+endef
+TARGET_DEVICES += ubnt_bullet-m-xw
+
+define Device/ubnt_edgeswitch-5xp
+ $(Device/ubnt-sw)
+ DEVICE_MODEL := EdgeSwitch 5XP
+endef
+TARGET_DEVICES += ubnt_edgeswitch-5xp
+
+define Device/ubnt_edgeswitch-8xp
+ $(Device/ubnt-sw)
+ DEVICE_MODEL := EdgeSwitch 8XP
+ DEVICE_PACKAGES += kmod-switch-bcm53xx-mdio
+endef
+TARGET_DEVICES += ubnt_edgeswitch-8xp
+
+define Device/ubnt_lap-120
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := LiteAP ac (LAP-120)
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += ubnt_lap-120
+
+define Device/ubnt_litebeam-ac-gen2
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := LiteBeam AC
+ DEVICE_VARIANT := Gen2
+ DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += ubnt_litebeam-ac-gen2
+
+define Device/ubnt_nanobeam-ac
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := NanoBeam AC
+ DEVICE_VARIANT := Gen1
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
+endef
+TARGET_DEVICES += ubnt_nanobeam-ac
+
+define Device/ubnt_nanobeam-ac-gen2
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := NanoBeam AC
+ DEVICE_VARIANT := Gen2
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
+endef
+TARGET_DEVICES += ubnt_nanobeam-ac-gen2
+
+define Device/ubnt_nanobeam-ac-xc
+ $(Device/ubnt-xc)
+ SOC := qca9558
+ DEVICE_MODEL := NanoBeam AC
+ DEVICE_VARIANT := Gen1 (XC)
+ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct rssileds
+endef
+TARGET_DEVICES += ubnt_nanobeam-ac-xc
+
+define Device/ubnt_nanobridge-m
+ $(Device/ubnt-xm)
+ SOC := ar7241
+ DEVICE_MODEL := NanoBridge M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += bullet-m
+endef
+TARGET_DEVICES += ubnt_nanobridge-m
+
+define Device/ubnt_nanostation-ac
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := Nanostation AC
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
+endef
+TARGET_DEVICES += ubnt_nanostation-ac
+
+define Device/ubnt_nanostation-ac-loco
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := Nanostation AC loco
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += ubnt_nanostation-ac-loco
+
+define Device/ubnt_nanostation-loco-m
+ $(Device/ubnt-xm)
+ SOC := ar7241
+ DEVICE_MODEL := Nanostation Loco M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += bullet-m
+endef
+TARGET_DEVICES += ubnt_nanostation-loco-m
+
+define Device/ubnt_nanostation-loco-m-xw
+ $(Device/ubnt-xw)
+ DEVICE_MODEL := Nanostation Loco M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += loco-m-xw
+endef
+TARGET_DEVICES += ubnt_nanostation-loco-m-xw
+
+define Device/ubnt_nanostation-m
+ $(Device/ubnt-xm)
+ SOC := ar7241
+ DEVICE_MODEL := Nanostation M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += nanostation-m
+endef
+TARGET_DEVICES += ubnt_nanostation-m
+
+define Device/ubnt_nanostation-m-xw
+ $(Device/ubnt-xw)
+ DEVICE_MODEL := Nanostation M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += nanostation-m-xw
+endef
+TARGET_DEVICES += ubnt_nanostation-m-xw
+
+define Device/ubnt_picostation-m
+ $(Device/ubnt-xm)
+ SOC := ar7241
+ DEVICE_MODEL := Picostation M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += bullet-m
+endef
+TARGET_DEVICES += ubnt_picostation-m
+
+define Device/ubnt_powerbeam-5ac-500
+ $(Device/ubnt-xc)
+ SOC := qca9558
+ DEVICE_MODEL := PowerBeam 5AC
+ DEVICE_VARIANT := 500
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += ubnt_powerbeam-5ac-500
+
+define Device/ubnt_powerbeam-5ac-gen2
+ $(Device/ubnt-wa)
+ DEVICE_MODEL := PowerBeam 5AC
+ DEVICE_VARIANT := Gen2
+ DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
+endef
+TARGET_DEVICES += ubnt_powerbeam-5ac-gen2
+
+define Device/ubnt_powerbeam-m2-xw
+ $(Device/ubnt-xw)
+ DEVICE_MODEL := PowerBeam M2
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += loco-m-xw
+endef
+TARGET_DEVICES += ubnt_powerbeam-m2-xw
+
+define Device/ubnt_powerbeam-m5-xw
+ $(Device/ubnt-xw)
+ DEVICE_MODEL := PowerBeam M5
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += loco-m-xw
+endef
+TARGET_DEVICES += ubnt_powerbeam-m5-xw
+
+define Device/ubnt_powerbridge-m
+ $(Device/ubnt-xm)
+ SOC := ar7241
+ DEVICE_MODEL := PowerBridge M
+ DEVICE_PACKAGES += rssileds
+ SUPPORTED_DEVICES += bullet-m
+endef
+TARGET_DEVICES += ubnt_powerbridge-m
+
+define Device/ubnt_rocket-5ac-lite
+ $(Device/ubnt-xc)
+ SOC := qca9558
+ DEVICE_MODEL := Rocket 5AC
+ DEVICE_VARIANT := Lite
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += ubnt_rocket-5ac-lite
define Device/ubnt_rocket-m
$(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Rocket-M
+ SOC := ar7241
+ DEVICE_MODEL := Rocket M
+ DEVICE_PACKAGES += rssileds
SUPPORTED_DEVICES += rocket-m
endef
TARGET_DEVICES += ubnt_rocket-m
-define Device/ubnt_nano-m
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Nano-M
- SUPPORTED_DEVICES += nano-m
+define Device/ubnt_routerstation_common
+ DEVICE_PACKAGES := -kmod-ath9k -wpad-basic-wolfssl -uboot-envtools kmod-usb-ohci \
+ kmod-usb2 fconfig
+ DEVICE_VENDOR := Ubiquiti
+ SOC := ar7161
+ IMAGE_SIZE := 16128k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage | \
+ check-size
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | \
+ check-size | append-metadata
+ KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE)
+ KERNEL_INITRAMFS := kernel-bin | append-dtb
+endef
+
+define Device/ubnt_routerstation
+ $(Device/ubnt_routerstation_common)
+ DEVICE_MODEL := RouterStation
+ UBNT_BOARD := RS
+ UBNT_TYPE := RSx
+ UBNT_CHIP := ar7100
+ DEVICE_PACKAGES += -swconfig
+ SUPPORTED_DEVICES += routerstation
endef
-TARGET_DEVICES += ubnt_nano-m
+TARGET_DEVICES += ubnt_routerstation
+
+define Device/ubnt_routerstation-pro
+ $(Device/ubnt_routerstation_common)
+ DEVICE_MODEL := RouterStation Pro
+ UBNT_BOARD := RSPRO
+ UBNT_TYPE := RSPRO
+ UBNT_CHIP := ar7100pro
+ SUPPORTED_DEVICES += routerstation-pro
+endef
+TARGET_DEVICES += ubnt_routerstation-pro
define Device/ubnt_unifi
$(Device/ubnt-bz)
- DEVICE_TITLE := Ubiquiti UniFi
+ DEVICE_MODEL := UniFi
SUPPORTED_DEVICES += unifi
endef
TARGET_DEVICES += ubnt_unifi
define Device/ubnt_unifiac
- ATH_SOC := qca9563
+ DEVICE_VENDOR := Ubiquiti
+ SOC := qca9563
IMAGE_SIZE := 7744k
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
- DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
endef
-
define Device/ubnt_unifiac-lite
$(Device/ubnt_unifiac)
- DEVICE_TITLE := Ubiquiti UniFi AC-Lite
- SUPPORTED_DEVICES += ubnt-unifiac-lite
+ DEVICE_MODEL := UniFi AC Lite
+ SUPPORTED_DEVICES += unifiac-lite
endef
TARGET_DEVICES += ubnt_unifiac-lite
+define Device/ubnt_unifiac-lr
+ $(Device/ubnt_unifiac)
+ DEVICE_MODEL := UniFi AC LR
+ SUPPORTED_DEVICES += unifiac-lite ubnt,unifiac-lite
+endef
+TARGET_DEVICES += ubnt_unifiac-lr
+
define Device/ubnt_unifiac-mesh
$(Device/ubnt_unifiac)
- DEVICE_TITLE := Ubiquiti UniFi AC-Mesh
- SUPPORTED_DEVICES += ubnt-unifiac-mesh
+ DEVICE_MODEL := UniFi AC Mesh
+ SUPPORTED_DEVICES += unifiac-lite
endef
TARGET_DEVICES += ubnt_unifiac-mesh
define Device/ubnt_unifiac-mesh-pro
$(Device/ubnt_unifiac)
- DEVICE_TITLE := Ubiquiti UniFi AC-Mesh Pro
- SUPPORTED_DEVICES += ubnt-unifiac-mesh-pro
+ DEVICE_MODEL := UniFi AC Mesh Pro
+ SUPPORTED_DEVICES += unifiac-pro
endef
TARGET_DEVICES += ubnt_unifiac-mesh-pro
define Device/ubnt_unifiac-pro
$(Device/ubnt_unifiac)
- DEVICE_TITLE := Ubiquiti UniFi AC-Pro
- DEVICE_PACKAGES += kmod-usb-core kmod-usb2
- SUPPORTED_DEVICES += ubnt-unifiac-pro
+ DEVICE_MODEL := UniFi AC Pro
+ DEVICE_PACKAGES += kmod-usb2
+ SUPPORTED_DEVICES += unifiac-pro
endef
TARGET_DEVICES += ubnt_unifiac-pro
+
+define Device/ubnt_unifi-ap-outdoor-plus
+ $(Device/ubnt-bz)
+ $(Device/ubnt-unifi-jffs2)
+ DEVICE_MODEL := UniFi AP Outdoor+
+ SUPPORTED_DEVICES += unifi-outdoor-plus
+endef
+TARGET_DEVICES += ubnt_unifi-ap-outdoor-plus
+
+define Device/ubnt_unifi-ap-pro
+ $(Device/ubnt-unifi-jffs2)
+ SOC := ar9344
+ DEVICE_MODEL := UniFi AP Pro
+ UBNT_CHIP := ar934x
+ SUPPORTED_DEVICES += uap-pro
+endef
+TARGET_DEVICES += ubnt_unifi-ap-pro