+define Build/dongwon-header
+ head -c 4 $@ > $@.tmp
+ head -c 8 /dev/zero >> $@.tmp
+ tail -c +9 $@ >> $@.tmp
+ ( \
+ header_crc="$$(head -c 68 $@.tmp | gzip -c | \
+ tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n')"; \
+ printf "$$(echo $$header_crc | sed 's/../\\x&/g')" | \
+ dd of=$@.tmp bs=4 count=1 seek=1 conv=notrunc \
+ )
+ mv $@.tmp $@
+endef
+
+define Build/MerakiNAND
+ -$(STAGING_DIR_HOST)/bin/mkmerakifw \
+ -B $(1) -s \
+ -i $@ \
+ -o $@.new
+ @mv $@.new $@
+endef
+
+define Build/meraki-old-nand
+ -$(STAGING_DIR_HOST)/bin/mkmerakifw-old \
+ -B $(1) -s \
+ -i $@ \
+ -o $@.new
+ @mv $@.new $@
+endef
+
# attention: only zlib compression is allowed for the boot fs
define Build/zyxel-buildkerneljffs
- rm -rf $(KDIR_TMP)/zyxelnbg6716
- mkdir -p $(KDIR_TMP)/zyxelnbg6716/image/boot
- cp $@ $(KDIR_TMP)/zyxelnbg6716/image/boot/vmlinux.lzma.uImage
+ mkdir -p $@.tmp/boot
+ cp $@ $@.tmp/boot/vmlinux.lzma.uImage
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
--big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \
-o $@ \
- -d $(KDIR_TMP)/zyxelnbg6716/image
- rm -rf $(KDIR_TMP)/zyxelnbg6716
+ -d $@.tmp
+ rm -rf $@.tmp
endef
define Build/zyxel-factory
endef
TARGET_DEVICES += domywifi_dw33d
+define Device/dongwon_dw02-412h
+ SOC := qca9557
+ DEVICE_VENDOR := Dongwon T&I
+ DEVICE_MODEL := DW02-412H
+ DEVICE_ALT0_VENDOR := KT
+ DEVICE_ALT0_MODEL := GiGA WiFi home
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ KERNEL_SIZE := 8192k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL := $$(KERNEL) | dongwon-header
+ KERNEL_INITRAMFS := $$(KERNEL)
+ UBINIZE_OPTS := -E 5
+ IMAGES += factory.img
+ IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
+ check-size
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
+define Device/dongwon_dw02-412h-64m
+ $(Device/dongwon_dw02-412h)
+ DEVICE_VARIANT := (64M)
+ DEVICE_ALT0_VARIANT := (64M)
+ IMAGE_SIZE := 49152k
+endef
+TARGET_DEVICES += dongwon_dw02-412h-64m
+
+define Device/dongwon_dw02-412h-128m
+ $(Device/dongwon_dw02-412h)
+ DEVICE_VARIANT := (128M)
+ DEVICE_ALT0_VARIANT := (128M)
+ IMAGE_SIZE := 114688k
+endef
+TARGET_DEVICES += dongwon_dw02-412h-128m
+
define Device/glinet_gl-ar300m-common-nand
SOC := qca9531
DEVICE_VENDOR := GL.iNet
endef
TARGET_DEVICES += glinet_gl-e750
+define Device/glinet_gl-xe300
+ SOC := qca9531
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-XE300
+ DEVICE_PACKAGES := kmod-usb2 block-mount kmod-usb-serial-ch341
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 131072k
+ PAGESIZE := 2048
+ VID_HDR_OFFSET := 2048
+ BLOCKSIZE := 128k
+ IMAGES += factory.img
+ IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += glinet_gl-xe300
+
+define Device/meraki_mr18
+ SOC := qca9557
+ DEVICE_VENDOR := Meraki
+ DEVICE_MODEL := MR18
+ DEVICE_PACKAGES := kmod-spi-gpio nu801
+ KERNEL_SIZE := 8m
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ LOADER_TYPE := bin
+ KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | MerakiNAND MR18
+ KERNEL_INITRAMFS := $$(KERNEL)
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += meraki_mr18
+
+define Device/meraki_z1
+ SOC = ar9344
+ DEVICE_VENDOR := Meraki
+ DEVICE_MODEL := Z1
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-owl-loader
+ KERNEL_SIZE := 8064k
+ BLOCKSIZE := 64k
+ PAGESIZE := 2048
+ KERNEL := kernel-bin | meraki-old-nand z1
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += meraki_z1
+
# fake rootfs is mandatory, pad-offset 129 equals (2 * uimage_header + 0xff)
define Device/netgear_ath79_nand
DEVICE_VENDOR := NETGEAR
UBINIZE_OPTS := -E 5
endef
+define Device/netgear_r6100
+ SOC := ar9344
+ DEVICE_MODEL := R6100
+ UIMAGE_MAGIC := 0x36303030
+ NETGEAR_BOARD_ID := R6100
+ NETGEAR_HW_ID := 29764434+0+128+128+2x2+2x2
+ $(Device/netgear_ath79_nand)
+ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += netgear_r6100
+
define Device/netgear_wndr3700-v4
SOC := ar9344
DEVICE_MODEL := WNDR3700
endef
TARGET_DEVICES += netgear_wndr4500-v3
+define Device/zte_mf286_common
+ SOC := qca9563
+ DEVICE_VENDOR := ZTE
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 4096k
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
+define Device/zte_mf286
+ $(Device/zte_mf286_common)
+ DEVICE_MODEL := MF286
+ DEVICE_PACKAGES += ath10k-firmware-qca988x-ct kmod-usb-net-qmi-wwan \
+ kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += zte_mf286
+
+define Device/zte_mf286a
+ $(Device/zte_mf286_common)
+ DEVICE_MODEL := MF286A
+ DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-qmi-wwan \
+ kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += zte_mf286a
+
+define Device/zte_mf286r
+ $(Device/zte_mf286_common)
+ DEVICE_MODEL := MF286R
+ DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-rndis kmod-usb-acm \
+ comgt-ncm
+endef
+TARGET_DEVICES += zte_mf286r
+
define Device/zyxel_nbg6716
SOC := qca9558
DEVICE_VENDOR := ZyXEL
KERNEL_SIZE := 4096k
BLOCKSIZE := 128k
PAGESIZE := 2048
- KERNEL := kernel-bin | append-dtb | uImage none | zyxel-buildkerneljffs | \
- check-size 4096k
+ LOADER_TYPE := bin
+ KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | uImage none | \
+ zyxel-buildkerneljffs | check-size 4096k
IMAGES := sysupgrade.tar sysupgrade-4M-Kernel.bin factory.bin
IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | \
sysupgrade-tar rootfs=$$$$@ | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
zyxel-factory
UBINIZE_OPTS := -E 5
- DEFAULT := n
endef
TARGET_DEVICES += zyxel_nbg6716
+
+define Device/zyxel_emg2926_q10a
+ $(Device/zyxel_nbg6716)
+ DEVICE_MODEL := EMG2926-Q10A
+ RAS_BOARD := AAVK-EMG2926Q10A
+endef
+TARGET_DEVICES += zyxel_emg2926_q10a
projects / openwrt / staging / chunkeey.git / blobdiff