ath79: add support for Netgear PGZNG1

[openwrt/staging/hauke.git] / target / linux / ath79 / nand / base-files / etc / board.d / 02_network

diff --git a/target/linux/ath79/nand/base-files/etc/board.d/02_network b/target/linux/ath79/nand/base-files/etc/board.d/02_network
old mode 100755 (executable)
new mode 100644 (file)
index 87c52a6..01f26fb
--- a/target/linux/ath79/nand/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/nand/base-files/etc/board.d/02_network
@@ -1,4 +1,3 @@
-#!/bin/sh
 
 . /lib/functions/system.sh
 . /lib/functions/uci-defaults.sh
@@ -8,9 +7,63 @@ ath79_setup_interfaces()
        local board="$1"
 
        case "$board" in
-       aerohive,hiveap-121)
+       aerohive,hiveap-121|\
+       glinet,gl-e750)
                ucidef_set_interface_lan "eth0"
                ;;
+       domywifi,dw33d)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:wan" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1"
+               ;;
+       dongwon,dw02-412h-64m|\
+       dongwon,dw02-412h-128m)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
+               ;;
+       glinet,gl-ar750s-nor|\
+       glinet,gl-ar750s-nor-nand)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "2:lan:2" "3:lan:1" "1:wan"
+               ;;
+       glinet,gl-xe300)
+               ucidef_set_interface_wan "eth1"
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "4:lan"
+               ;;
+       netgear,pgzng1)
+               ucidef_set_interfaces_lan_wan "eth1" "eth0"
+               ;;
+       netgear,r6100)
+               ucidef_set_interface_wan "eth1"
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
+               ;;
+       netgear,wndr3700-v4|\
+       netgear,wndr4300|\
+       netgear,wndr4300sw|\
+       netgear,wndr4300-v2)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
+               ;;
+       netgear,wndr4500-v3)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+               ;;
+       netgear,wndr4300tn)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+               ;;
+       zte,mf286|\
+       zte,mf286a|\
+       zte,mf286r)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "5:lan:1"
+               ;;
+       zyxel,emg2926-q10a|\
+       zyxel,nbg6716)
+               ucidef_add_switch "switch0" \
+                       "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
+               ;;
        *)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ;;
@@ -22,6 +75,18 @@ ath79_setup_macs()
        local board="$1"
 
        case "$board" in
+       dongwon,dw02-412h-64m|\
+       dongwon,dw02-412h-128m)
+               wan_mac=$(mtd_get_mac_binary art 0x0)
+               label_mac=$wan_mac
+               ;;
+       netgear,wndr3700-v4|\
+       netgear,wndr4300|\
+       netgear,wndr4300sw|\
+       netgear,wndr4300-v2|\
+       netgear,wndr4500-v3)
+               wan_mac=$(mtd_get_mac_binary caldata 0x6)
+               ;;
        esac
 
        [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac