bcm53xx: switch to the upstream DSA-based b53 driver

[openwrt/staging/chunkeey.git] / target / linux / bcm53xx / config-5.10

diff --git a/target/linux/bcm53xx/config-5.10 b/target/linux/bcm53xx/config-5.10
index 9d98e812bd59cdafa26ef26c97013b2c44c1aa9c..ea5a7b0dc760168ec9ab6ec1ba63691e4f5dd5d6 100644 (file)
--- a/target/linux/bcm53xx/config-5.10
+++ b/target/linux/bcm53xx/config-5.10
@@ -39,6 +39,12 @@ CONFIG_ARM_UNWIND=y
 CONFIG_ARM_VIRT_EXT=y
 CONFIG_ATAGS=y
 CONFIG_AUTO_ZRELADDR=y
+CONFIG_B53=y
+CONFIG_B53_MDIO_DRIVER=y
+# CONFIG_B53_MMAP_DRIVER is not set
+# CONFIG_B53_SERDES is not set
+# CONFIG_B53_SPI_DRIVER is not set
+CONFIG_B53_SRAB_DRIVER=y
 CONFIG_BCM47XX_NVRAM=y
 CONFIG_BCM47XX_SPROM=y
 CONFIG_BCM47XX_WDT=y
@@ -149,6 +155,7 @@ CONFIG_GPIOLIB_IRQCHIP=y
 CONFIG_GPIO_74X164=y
 CONFIG_GPIO_BCM_XGS_IPROC=y
 CONFIG_GPIO_GENERIC=y
+CONFIG_GRO_CELLS=y
 CONFIG_HANDLE_DOMAIN_IRQ=y
 CONFIG_HARDEN_BRANCH_PREDICTOR=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -204,7 +211,14 @@ CONFIG_MTD_UBI_BLOCK=y
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MUTEX_SPIN_ON_OWNER=y
 CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_TAG_BRCM=y
+CONFIG_NET_DSA_TAG_BRCM_COMMON=y
+CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
+CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
 CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_SWITCHDEV=y
 CONFIG_NR_CPUS=2
 CONFIG_NVMEM=y
 CONFIG_NVMEM_BRCM_NVRAM=y
@@ -233,6 +247,7 @@ CONFIG_PCI_DOMAINS_GENERIC=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PGTABLE_LEVELS=2
 CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
 # CONFIG_PHY_BCM_NS_USB2 is not set
 # CONFIG_PHY_BCM_NS_USB3 is not set
 # CONFIG_PHY_BCM_SR_PCIE is not set
@@ -266,11 +281,6 @@ CONFIG_SPI_GPIO=y
 CONFIG_SPI_MASTER=y
 CONFIG_SPI_MEM=y
 CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-CONFIG_SWCONFIG_B53_SRAB_DRIVER=y
 CONFIG_SWPHY=y
 CONFIG_SWP_EMULATE=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y