rm -f $(KDIR)/fs_mark
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/fs_mark
$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
+
+ # For UBI we want only one extra block
+ rm -f $(KDIR)/ubi_mark
+ echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
+endef
+
+define Build/lzma-d16
+ $(STAGING_DIR_HOST)/bin/lzma e $@ -d16 $(1) $@.new
+ mv $@.new $@
+endef
+
+define Build/trx-serial
+ $(STAGING_DIR_HOST)/bin/trx \
+ -o $@.new \
+ -m 33554432 \
+ -f $(word 1,$^) -a 1024 \
+ -f $@ -a 0x10000 -A $(KDIR)/fs_mark
+ mv $@.new $@
+endef
+
+define Build/trx-nand
+ # kernel: always use 4 MiB (-28 B or TRX header) to allow upgrades even
+ # if it grows up between releases
+ # root: UBI with one extra block containing UBI mark to trigger erasing
+ # rest of partition
+ $(STAGING_DIR_HOST)/bin/trx \
+ -o $@.new \
+ -m 33554432 \
+ -f $(word 1,$^) -a 0x20000 -b 0x400000 \
+ -f $@ \
+ -A $(KDIR)/ubi_mark -a 0x20000
+ mv $@.new $@
+endef
+
+define Build/asus-trx
+ $(STAGING_DIR_HOST)/bin/asustrx \
+ -p $(PRODUCTID) -i $@ -o $@.new
+ mv $@.new $@
endef
-define Image/Build/Initramfs
- $(call Image/Build/Initramfs/Chk,bcm4708-netgear-r6250,U12H245T00_NETGEAR,2,initramfs)
+define Build/seama-nand
+ # Seama entity
+ $(STAGING_DIR_HOST)/bin/oseama \
+ entity $@.entity \
+ -m "dev=/dev/mtdblock/7" \
+ -m "type=firmware" \
+ -f $(word 1,$^) \
+ -b 0x400000 \
+ -f $@ \
+ -f $(KDIR)/ubi_mark
+ # Seama container
+ $(STAGING_DIR_HOST)/bin/seama \
+ -s $@ \
+ -m "signature=$(SIGNATURE)" \
+ -i $@.entity
+endef
+
+DEVICE_VARS += DEVICE_DTS PRODUCTID SIGNATURE NETGEAR_BOARD_ID NETGEAR_REGION
+
+define Device/Default
+ # .dtb files are prefixed by SoC type, e.g. bcm4708- which is not included in device/image names
+ # extract the full dtb name based on the device info
+ DEVICE_DTS := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(1).dtb)))
+ KERNEL := kernel-bin | append-dtb | lzma-d16
+ KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
+ FILESYSTEMS := squashfs
+ KERNEL_NAME := zImage
+ IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2)
+ IMAGES := trx
+ BLOCKSIZE := 128KiB
+ PAGESIZE := 2048
+ UBINIZE_OPTS :=
+ IMAGE/trx := append-ubi | trx-nand
endef
-define Image/Build/Initramfs/Chk
- $(call Image/Build/Initramfs/DTB,$(1))
- $(STAGING_DIR_HOST)/bin/mkchkimg -o $(BIN_DIR)/openwrt-$(1)-$(4).chk -k $(KDIR)/$(IMG_PREFIX)-$(4)-$(1).trx -b $(2) -r $(3)
+define Device/asus
+ IMAGES := trx
+ IMAGE/trx := append-ubi | trx-nand | asus-trx
endef
-define Image/Build/Initramfs/DTB
- $(call Image/Build/DTB,zImage-initramfs,$(1))
- $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/$(IMG_PREFIX)-initramfs-$(1).trx \
- -f $(KDIR)/zImage-initramfs-$(1).lzma
+define AsusDevice
+ define Device/asus-$(1)
+ $$(Device/asus)
+ PRODUCTID := $(2)
+ endef
+ TARGET_DEVICES += asus-$(1)
endef
-define Image/Build/squashfs/DTB
- $(call Image/Build/DTB,zImage,$(1))
- $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/$(IMG_PREFIX)-squashfs-$(1).trx \
- -f $(KDIR)/zImage-$(1).lzma \
- -a 1024 -f $(KDIR)/root.squashfs -a 0x10000 -A $(KDIR)/fs_mark
+define LinksysDevice
+ TARGET_DEVICES += linksys-$(1)
endef
-define Image/Build/squashfs/Chk
- $(call Image/Build/squashfs/DTB,$(1))
- $(STAGING_DIR_HOST)/bin/mkchkimg -o $(BIN_DIR)/openwrt-$(1)-$(4).chk -k $(KDIR)/$(IMG_PREFIX)-$(4)-$(1).trx -b $(2) -r $(3)
+define Device/dlink
+ IMAGES := bin
+ IMAGE/bin := append-ubi | seama-nand
endef
-define Image/Build/DTB
- rm -f $(KDIR)/$(1)-$(2).lzma
- rm -f $(KDIR)/$(1)-$(2).dts
- cat $(KDIR)/$(1) $(LINUX_DIR)/arch/$(ARCH)/boot/dts/$(2).dtb > $(KDIR)/$(1)-$(2).dts;
- $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/$(1)-$(2).dts $(KDIR)/$(1)-$(2).lzma -d16
+define DLinkDevice
+ define Device/dlink-$(1)
+ $$(Device/dlink)
+ SIGNATURE := $(2)
+ endef
+ TARGET_DEVICES += dlink-$(1)
endef
-define Image/Build
- $(call Image/Build/$(1),$(1))
- $(call Image/Build/squashfs/Chk,bcm4708-netgear-r6250,U12H245T00_NETGEAR,2,squashfs)
+define Device/netgear
+ IMAGES := chk
+ IMAGE/chk := append-ubi | trx-nand | netgear-chk
+ NETGEAR_REGION := 1
endef
+define NetgearDevice
+ define Device/netgear-$(1)
+ $$(Device/netgear)
+ NETGEAR_BOARD_ID := $(2)
+ endef
+ TARGET_DEVICES += netgear-$(1)
+endef
+
+define Device/netgear-r6250
+ $(Device/netgear)
+ NETGEAR_BOARD_ID := U12H245T00_NETGEAR
+endef
+
+define Device/netgear-r6300-v2
+ $(Device/netgear)
+ NETGEAR_BOARD_ID := U12H240T00_NETGEAR
+endef
+
+define Device/netgear-r8000
+ $(Device/netgear)
+ NETGEAR_BOARD_ID := U12H315T00_NETGEAR
+endef
+
+define Device/smartrg-sr400ac
+ IMAGES := trx
+ IMAGE/trx := append-rootfs | trx-serial
+endef
+
+TARGET_DEVICES += \
+ buffalo-wzr-1750dhp buffalo-wzr-600dhp2 buffalo-wzr-900dhp \
+ buffalo-wxr-1900dhp \
+ netgear-r6250 netgear-r6300-v2 netgear-r8000 \
+ smartrg-sr400ac
+
+$(eval $(call AsusDevice,rt-ac56u,RT-AC56U))
+$(eval $(call AsusDevice,rt-ac68u,RT-AC68U))
+$(eval $(call AsusDevice,rt-ac87u,RT-AC87U))
+$(eval $(call AsusDevice,rt-n18u,RT-N18U))
+$(eval $(call DLinkDevice,dir-885l,wrgac42_dlink.2015_dir885l))
+$(eval $(call LinksysDevice,ea6300-v1))
+$(eval $(call NetgearDevice,r7000,U12H270T00_NETGEAR))
+$(eval $(call NetgearDevice,r7900,U12H315T30_NETGEAR))
+# $(eval $(call NetgearDevice,r8500,U12H334T00_NETGEAR))
$(eval $(call BuildImage))