rm -f $(KDIR)/fs_mark
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/fs_mark
$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
+
+ # For UBI we want only one extra block
+ rm -f $(KDIR)/ubi_mark
+ echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
+endef
+
+define Build/lzma-d16
+ $(STAGING_DIR_HOST)/bin/lzma e $@ -d16 $(1) $@.new
+ mv $@.new $@
+endef
+
+define Build/trx-serial
+ $(STAGING_DIR_HOST)/bin/trx \
+ -o $@.new \
+ -m 33554432 \
+ -f $(IMAGE_KERNEL) -a 1024 \
+ -f $@ -a 0x10000 -A $(KDIR)/fs_mark
+ mv $@.new $@
+endef
+
+define Build/trx-nand
+ # kernel: always use 4 MiB (-28 B or TRX header) to allow upgrades even
+ # if it grows up between releases
+ # root: UBI with one extra block containing UBI mark to trigger erasing
+ # rest of partition
+ $(STAGING_DIR_HOST)/bin/trx \
+ -o $@.new \
+ -m 33554432 \
+ -f $(IMAGE_KERNEL) -a 0x20000 -b 0x400000 \
+ -f $@ \
+ -A $(KDIR)/ubi_mark -a 0x20000
+ mv $@.new $@
+endef
+
+define Build/asus-trx
+ $(STAGING_DIR_HOST)/bin/asustrx \
+ -p $(PRODUCTID) -i $@ -o $@.new
+ mv $@.new $@
+endef
+
+define Build/seama-nand
+ # Seama entity
+ $(STAGING_DIR_HOST)/bin/oseama \
+ entity $@.entity \
+ -m "dev=/dev/mtdblock/7" \
+ -m "type=firmware" \
+ -f $(IMAGE_KERNEL) \
+ -b 0x400000 \
+ -f $@ \
+ -f $(KDIR)/ubi_mark
+ # Seama container
+ $(STAGING_DIR_HOST)/bin/seama \
+ -s $@ \
+ -m "signature=$(SIGNATURE)" \
+ -i $@.entity
+endef
+
+DEVICE_VARS += PRODUCTID SIGNATURE NETGEAR_BOARD_ID NETGEAR_REGION
+
+USB2_PACKAGES := kmod-usb-ohci kmod-usb2
+USB3_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3
+
+define Device/Default
+ # .dtb files are prefixed by SoC type, e.g. bcm4708- which is not included in device/image names
+ # extract the full dtb name based on the device info
+ DEVICE_DTS := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(1).dtb)))
+ KERNEL := kernel-bin | append-dtb | lzma-d16
+ KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
+ FILESYSTEMS := squashfs
+ KERNEL_NAME := zImage
+ IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2)
+ IMAGES := trx
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE/trx := append-ubi | trx-nand
endef
-define trx2ndpart/serial
--a 1024 -f $(KDIR)/root.squashfs -a 0x10000 -A $(KDIR)/fs_mark
+define Device/asus
+ IMAGES := trx
+ IMAGE/trx := append-ubi | trx-nand | asus-trx
endef
-# $(1): dts filename (also used for the firmware file).
-# $(2): flash type (not used).
-define Image/Build/initramfs/DTB
- $(call Image/Build/DTB,zImage-initramfs,$(1))
- $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/$(IMG_PREFIX)-$(1)-initramfs.trx \
- -f $(KDIR)/zImage-initramfs-$(1).lzma
+define Device/asus-rt-ac56u
+ DEVICE_TITLE := Asus RT-AC56U
+ DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES)
endef
+TARGET_DEVICES += asus-rt-ac56u
-# $(1): dts filename (also used for the firmware file).
-# $(2): flash type.
-define Image/Build/squashfs/DTB
- $(call Image/Build/DTB,zImage,$(1))
- $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/$(IMG_PREFIX)-$(1)-squashfs.trx \
- -f $(KDIR)/zImage-$(1).lzma \
- $(call trx2ndpart/$(2))
+define Device/asus-rt-ac68u
+ DEVICE_TITLE := Asus RT-AC68U
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
endef
+TARGET_DEVICES += asus-rt-ac68u
-# $(1): kernel (Linux) image file
-# $(2): dts filename (also used for the firmware file).
-define Image/Build/DTB
- rm -f $(KDIR)/$(1)-$(2).lzma
- rm -f $(KDIR)/$(1)-$(2).dts
- cat $(KDIR)/$(1) $(DTS_DIR)/$(2).dtb > $(KDIR)/$(1)-$(2).dts;
- $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/$(1)-$(2).dts $(KDIR)/$(1)-$(2).lzma -d16
+define Device/asus-rt-ac87u
+ DEVICE_TITLE := Asus RT-AC87U
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
endef
+TARGET_DEVICES += asus-rt-ac87u
-# $(1): filesystem type (e.g. squashfs, initramfs).
-# $(2): dts filename (also used for the firmware file).
-# $(3): flash type.
-# $(4): device specific magic.
-define Image/Build/AsusTrx
- $(call Image/Build/$(1)/DTB,$(2),$(3))
- # TODO: Put magic in TRX file
- cp $(KDIR)/$(IMG_PREFIX)-$(2)-$(1).trx $(BIN_DIR)/
+define Device/asus-rt-n18u
+ DEVICE_TITLE := Asus RT-N18U
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
endef
+TARGET_DEVICES += asus-rt-n18u
-# $(1): filesystem type (e.g. squashfs, initramfs).
-# $(2): dts filename (also used for the firmware file).
-# $(3): flash type.
-define Image/Build/Trx
- $(call Image/Build/$(1)/DTB,$(2),$(3))
- cp $(KDIR)/$(IMG_PREFIX)-$(2)-$(1).trx $(BIN_DIR)/
+define Device/buffalo-wxr-1900dhp
+ DEVICE_TITLE := Buffalo WXR-1900DHP
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
endef
+TARGET_DEVICES += buffalo-wxr-1900dhp
-# $(1): filesystem type (e.g. squashfs, initramfs).
-# $(2): dts filename (also used for the firmware file).
-# $(3): flash type.
-# $(4): board_id (device specific magic).
-# $(5): region.
-define Image/Build/Chk
- $(call Image/Build/$(1)/DTB,$(2),$(3))
- $(STAGING_DIR_HOST)/bin/mkchkimg -o $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).chk -k $(KDIR)/$(IMG_PREFIX)-$(2)-$(1).trx -b $(4) -r $(5)
+define Device/buffalo-wzr-600dhp2
+ DEVICE_TITLE := Buffalo WZR-600DHP2
+ DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
endef
+TARGET_DEVICES += buffalo-wzr-600dhp2
-# $(1): filesystem type (e.g. squashfs, initramfs).
-define Image/Build
- $(call Image/Build/AsusTrx,$(1),bcm47081-asus-rt-n18u,serial,RT-N18U)
+define Device/buffalo-wzr-900dhp
+ DEVICE_TITLE := Buffalo WZR-900DHP
+ DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES)
+endef
+TARGET_DEVICES += buffalo-wzr-900dhp
+
+define Device/buffalo-wzr-1750dhp
+ DEVICE_TITLE := Buffalo WZR-1750DHP
+ DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES)
+endef
+TARGET_DEVICES += buffalo-wzr-1750dhp
+
+define Device/dlink
+ IMAGES := bin
+ IMAGE/bin := append-ubi | seama-nand
+endef
- $(call Image/Build/Chk,$(1),bcm4708-netgear-r6250,serial,U12H245T00_NETGEAR,1)
- $(call Image/Build/Chk,$(1),bcm4708-netgear-r6300-v2,serial,U12H240T00_NETGEAR,1)
-
- $(call Image/Build/Trx,$(1),bcm4708-buffalo-wzr-1750dhp,serial)
- $(call Image/Build/Trx,$(1),bcm47081-buffalo-wzr-600dhp2,serial)
+define Device/dlink-dir-885l
+ DEVICE_TITLE := D-Link DIR-885L
+ DEVICE_PACKAGES := kmod-brcmfmac $(USB3_PACKAGES)
+ $(Device/dlink)
+ SIGNATURE := wrgac42_dlink.2015_dir885l
endef
+TARGET_DEVICES += dlink-dir-885l
-define Image/Build/Initramfs
- $(call Image/Build,initramfs)
+define Device/linksys-ea6300-v1
+ DEVICE_TITLE := Linksys EA6300 V1
+ DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES)
endef
+TARGET_DEVICES += linksys-ea6300-v1
+
+define Device/netgear
+ IMAGES := chk
+ IMAGE/chk := append-ubi | trx-nand | netgear-chk
+ NETGEAR_REGION := 1
+endef
+
+define Device/netgear-r6250
+ DEVICE_TITLE := Netgear R6250
+ DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES)
+ $(Device/netgear)
+ NETGEAR_BOARD_ID := U12H245T00_NETGEAR
+endef
+
+define Device/netgear-r6300-v2
+ DEVICE_TITLE := Netgear R6300 V2
+ DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES)
+ $(Device/netgear)
+ NETGEAR_BOARD_ID := U12H240T00_NETGEAR
+endef
+
+define Device/netgear-r7000
+ DEVICE_TITLE := Netgear R7000
+ DEVICE_PACKAGES := $(USB3_PACKAGES)
+ $(Device/netgear)
+ NETGEAR_BOARD_ID := U12H270T00_NETGEAR
+endef
+TARGET_DEVICES += netgear-r7000
+
+define Device/netgear-r7900
+ DEVICE_TITLE := Netgear R7900
+ DEVICE_PACKAGES := kmod-brcmfmac $(USB3_PACKAGES)
+ $(Device/netgear)
+ NETGEAR_BOARD_ID := U12H315T30_NETGEAR
+endef
+TARGET_DEVICES += netgear-r7900
+
+define Device/netgear-r8000
+ DEVICE_TITLE := Netgear R8000
+ DEVICE_PACKAGES := kmod-brcmfmac $(USB3_PACKAGES)
+ $(Device/netgear)
+ NETGEAR_BOARD_ID := U12H315T00_NETGEAR
+endef
+
+define Device/netgear-r8500
+ DEVICE_TITLE := Netgear R8500
+ DEVICE_PACKAGES := kmod-brcmfmac $(USB3_PACKAGES)
+ $(Device/netgear)
+ NETGEAR_BOARD_ID := U12H334T00_NETGEAR
+endef
+# TARGET_DEVICES += netgear-r8500
+
+define Device/smartrg-sr400ac
+ DEVICE_TITLE := SmartRG SR400ac
+ DEVICE_PACKAGES := kmod-brcmfmac $(USB3_PACKAGES)
+ IMAGES := trx
+ IMAGE/trx := append-rootfs | trx-serial
+endef
+
+define Device/tenda-ac9
+ DEVICE_TITLE := Tenda AC9
+ DEVICE_PACKAGES := $(USB2_PACKAGES)
+ IMAGES := trx
+ IMAGE/trx := append-rootfs | trx-serial
+endef
+TARGET_DEVICES += tenda-ac9
+
+TARGET_DEVICES += \
+ netgear-r6250 netgear-r6300-v2 netgear-r8000 \
+ smartrg-sr400ac
$(eval $(call BuildImage))