+# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2009-2018 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
+
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
+define Build/copy-kernel.bin
+ $(call locked,$(MAKE) -C copy-kernel CROSS_COMPILE=$(TARGET_CROSS) O=$(KDIR),gemini-copy-kernel.bin)
+endef
+
# Cook a "WRGG" image, this board is apparently one in the D-Link
# WRGG family and uses the exact same firmware format as other
# D-Link devices.
-define Build/dir685-images
- mkwrggimg -i $(IMAGE_KERNEL) \
+define Build/dir685-image
+ mkwrggimg -i $@ \
-o $@.new \
-d /dev/mtdblock/1 \
-s wrgns01_dlwbr_dir685RBWW \
mv $@.new $@
endef
+# Padding added after the rootfs to an even 128k boundary
+# as this is 128k eraseblocks flash.
+define Build/dir685-pad-rootfs
+ $(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 128 >>$@
+endef
+
# Build D-Link DNS-313 images using the special header tool.
# rootfs.tgz and rd.tgz contains nothing, we only need them
# to satisfy the boot loader on the device. The zImage is
# the only real content.
define Build/dns313-images
mkdir -p $@.tmp/.boot
+ chmod 755 $@.tmp/.boot
echo "dummy" > $@.tmp/dummyfile
dns313-header $(IMAGE_KERNEL) \
$@.tmp/.boot/zImage
- tar --sort=name --owner=0 --group=0 --numeric-owner -czf $@ \
- -C $@.tmp .boot \
- $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)")
+ rm $@.tmp/dummyfile
+
+ genext2fs --block-size $(BLOCKSIZE:%k=%Ki) \
+ --size-in-blocks $$((1024 * $(CONFIG_TARGET_KERNEL_PARTSIZE))) \
+ --squash-uids \
+ --root $@.tmp $@.tmp-boot
+
+ # The device firmware needs revision 1 of EXT2
+ tune2fs -O filetype $@.tmp-boot
+ e2fsck -pDf $@.tmp-boot > /dev/null
+
+ ./dns313_gen_hdd_img.sh $@ $@.tmp-boot $(IMAGE_ROOTFS) \
+ $(CONFIG_TARGET_KERNEL_PARTSIZE) \
+ $(CONFIG_TARGET_ROOTFS_PARTSIZE)
rm -rf $@.tmp
endef
-# Create the special NAS4220B and Itian Square One SQ201 image
-# format with the squashfs and overlay inside the "rd.gz" file.
-# We pad it out to 6144K which is the size of the initramfs partition.
+define Build/wiligear-image
+ $(STAGING_DIR_HOST)/bin/mkfwimage2 \
+ -m GEOS -f 0x30000000 -z \
+ -v $(1).v5.00.SL3512.OpenWrt.00000.000000.000000 \
+ -p Kernel:0x020000:0x100000:0:0:$(IMAGE_KERNEL) \
+ -p Ramdisk:0x120000:0x500000:0:0:$@ \
+ -o $@.new
+
+ mv $@.new $@
+endef
+
+# Create the default image format used by the StorLink reference design
+# SL93512r, Raidsonic NAS4220B and Itian Square One SQ201
+# with the squashfs and overlay inside the "application" partition.
+#
+# These devices have a hard-coded partition table that the boot loader
+# constantly reflashes back, so we need to work around it like this:
#
-# The "application" partition is just blank. You can put anything
-# there when using OpenWRT. We just use that to create the
-# "sysupgrade" firmware image.
-define Build/nas4220b-sq201-images
- rm -rf $@-tmp
- mkdir -p $@-tmp
- dd if=$(IMAGE_ROOTFS) of=$@-tmp/rd.gz bs=6144k conv=sync
- dd if=/dev/zero of=$@-tmp/hddapp.tgz bs=6144k count=1
- cp $(IMAGE_KERNEL) $@-tmp/zImage
- cp ./ImageInfo-$(1) $@-tmp/ImageInfo
- (cd $@-tmp; tar --sort=name --owner=0 --group=0 --numeric-owner -czf $@ * \
+# 0x000000120000-0x000000320000 : "Kern" - small copy routine and first
+# part of the kernel goes here
+# 0x000000320000-0x000000920000 : "Ramdisk" - second part of the kernel and
+# some padding goes here
+# 0x000000920000-0x000000f20000 : "Application" - rootfs goes here
+define Build/storlink-default-images
+ mkdir -p $@.tmp
+
+ # "App" partition is the rootfs
+ mv $@ $@.tmp/hddapp.tgz
+ # 256 bytes copy routine
+ dd if=$(KDIR)/copy-kernel.bin of=$@.tmp/zImage
+ $(call Image/pad-to,$@.tmp/zImage,512)
+ # Copy first part of the kernel into zImage
+ dd if=$(IMAGE_KERNEL) of=$@.tmp/zImage bs=1 seek=512 count=2096640
+ # Put the rest of the kernel into the "ramdisk"
+ dd if=$(IMAGE_KERNEL) of=$@.tmp/rd.gz bs=1 skip=2096640 count=6144k conv=sync
+ cp ./ImageInfo-$(1) $@.tmp/ImageInfo
+
+ sed -i -e "s/DATESTR/`date +%Y%m%d $(if $(SOURCE_DATE_EPOCH),--date "@$(SOURCE_DATE_EPOCH)")`/g" $@.tmp/ImageInfo
+
+ (cd $@.tmp; tar --sort=name --owner=0 --group=0 --numeric-owner -czf $@ * \
$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)"))
- rm -rf $@-tmp
+
+ rm -rf $@.tmp
endef
# WBD-111 and WBD-222:
# All DTB files are prefixed with "gemini-"
define Device/Default
PROFILES := Default
- DEVICE_DTS := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(1).dtb)))
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
KERNEL_NAME := zImage
KERNEL := kernel-bin | append-dtb
- FILESYSTEMS := squashfs
- IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2)
BLOCKSIZE := 128k
- PAGESIZE := 2048
endef
# A reasonable set of default packages handling the NAS type
# of devices out of the box (former NAS42x0 IcyBox defaults)
-GEMINI_NAS_PACKAGES:=kmod-md-mod kmod-md-linear kmod-md-multipath \
+GEMINI_NAS_PACKAGES := $(DEFAULT_PACKAGES.nas) \
+ kmod-md-mod kmod-md-linear kmod-md-multipath \
kmod-md-raid0 kmod-md-raid1 kmod-md-raid10 kmod-md-raid456 \
kmod-fs-btrfs kmod-fs-cifs kmod-fs-nfs \
kmod-fs-nfsd kmod-fs-ntfs kmod-fs-reiserfs kmod-fs-vfat \
- kmod-nls-utf8 kmod-usb-storage-extras \
- samba36-server mdadm cfdisk fdisk e2fsprogs badblocks
+ kmod-nls-utf8 kmod-usb-storage-extras kmod-hwmon-drivetemp \
+ cfdisk e2fsprogs badblocks \
+ partx-utils
-define Device/dlink-dir-685
- DEVICE_TITLE := D-Link DIR-685 Xtreme N Storage Router
+# The DIR-685 flash layout is kernel in WRGG format, padded and followed
+# by the appended rootfs followed by some reasonable JFFS padding, the
+# remainder will be used by JFFS2 through overlayfs.
+#
+# - For the factory image, the WRGG image includes the rootfs so that the
+# default firmware will flash it properly as all it knows is WRGG format.
+# - For the sysupgrade, we do not include the rootfs in the kernel image
+# so it is not needelessly tossed into the RAM by the boot loader.
+# This will be flashed from OpenWrt userland anyways so we only need
+# the minimum to make the boot loader happy.
+define Device/dlink_dir-685
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DIR-685 Xtreme N Storage Router
+ DEVICE_DTS := gemini-dlink-dir-685
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES) \
- kmod-switch-rtl8366rb swconfig \
- rt2800-pci
- IMAGES := fwupdate.bin
- IMAGE/fwupdate.bin := dir685-images
+ kmod-rt2800-pci
+ IMAGES := factory.bin sysupgrade.bin
+ # Pad to 128k erase blocks with 160 bytes WRGG header
+ IMAGE/factory.bin := append-kernel | pad-offset 128k 160 | append-rootfs | dir685-pad-rootfs | dir685-image
+ IMAGE/sysupgrade.bin := append-kernel | pad-offset 128k 160 | dir685-image | append-rootfs | dir685-pad-rootfs | append-metadata
endef
-TARGET_DEVICES += dlink-dir-685
+TARGET_DEVICES += dlink_dir-685
-define Device/dlink-dns-313
- DEVICE_TITLE := D-Link DNS-313 1-Bay Network Storage Enclosure
+define Device/dlink_dns-313
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DNS-313 1-Bay Network Storage Enclosure
+ DEVICE_DTS := gemini-dlink-dns-313
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
- IMAGES := dns313-bootpart.tar.gz
- IMAGE/dns313-bootpart.tar.gz := dns313-images
+ BLOCKSIZE := 1k
+ FILESYSTEMS := ext4
+ IMAGES := factory.bin.gz
+ IMAGE/factory.bin.gz := dns313-images | gzip
endef
-TARGET_DEVICES += dlink-dns-313
-
-define Device/nas4220b-sq201
- ARTIFACTS := zImage
- ARTIFACT/zImage := append-kernel
- IMAGES += rd.gz sysupgrade.tar.gz
- IMAGE/rd.gz := append-rootfs | pad-to 6144k
- IMAGE/sysupgrade.tar.gz := nas4220b-sq201-images $(1)
+TARGET_DEVICES += dlink_dns-313
+
+# Default images setup used by the StorLink reference designs
+define Device/storlink-reference
+ COMPILE := copy-kernel-$(1).bin
+ COMPILE/copy-kernel-$(1).bin := copy-kernel.bin
+ IMAGES := factory.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 6144k | \
+ storlink-default-images $(1)
DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
endef
-define Device/nas4220b
- $(Device/nas4220b-sq201)
- DEVICE_TITLE := Raidsonic NAS IB-4220-B
+define Device/itian_sq201
+ $(Device/storlink-reference)
+ DEVICE_VENDOR := ITian
+ DEVICE_MODEL := Square One SQ201
+ DEVICE_DTS := gemini-sq201
+ DEVICE_PACKAGES += kmod-rt61-pci kmod-usb2-pci
endef
-TARGET_DEVICES += nas4220b
+TARGET_DEVICES += itian_sq201
-define Device/rut1xx
- DEVICE_TITLE := Teltonika RUT1xx
- DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES)
+define Device/raidsonic_ib-4220-b
+ $(Device/storlink-reference)
+ DEVICE_VENDOR := Raidsonic
+ DEVICE_MODEL := NAS IB-4220-B
+ DEVICE_DTS := gemini-nas4220b
endef
-TARGET_DEVICES += rut1xx
+TARGET_DEVICES += raidsonic_ib-4220-b
-define Device/sq201
- $(Device/nas4220b-sq201)
- DEVICE_TITLE := ITian Square One SQ201
- DEVICE_PACKAGES += rt61-pci usb2-pci
+define Device/storlink_sl93512r
+ $(Device/storlink-reference)
+ DEVICE_VENDOR := StorLink
+ DEVICE_MODEL := SL93512r
+ DEVICE_DTS := gemini-sl93512r
endef
-TARGET_DEVICES += sq201
+TARGET_DEVICES += storlink_sl93512r
+
-define Device/wbd111
- DEVICE_TITLE := Wiliboard WBD-111
+# The wiliboard images need some changes to be functional and buildable.
+#
+# The dts would need to use the ecoscentric,redboot-fis-partitions partition
+# parser to get the correct partition offsets and size.
+#
+# The mkfwimage2 call need to be adjusted to reflect the real size of kernel
+# and rootfs. It is expected that the OEM firmware adjusts the on flash
+# partition table with the values defined in the image header.
+define Device/wiliboard_wbd111
+ DEVICE_VENDOR := Wiliboard
+ DEVICE_MODEL := WBD-111
+ DEVICE_DTS := gemini-wbd111
KERNEL := kernel-bin | append-dtb | wbd-nops
+ IMAGES := factory.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | wiligear-image "WILI-S.WILIBOARD"
endef
-TARGET_DEVICES += wbd111
-define Device/wbd222
- DEVICE_TITLE := Wiliboard WBD-222
+define Device/wiliboard_wbd222
+ DEVICE_VENDOR := Wiliboard
+ DEVICE_MODEL := WBD-222
+ DEVICE_DTS := gemini-wbd222
KERNEL := kernel-bin | append-dtb | wbd-nops
+ IMAGES := factory.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | wiligear-image "WILI-S.WBD222"
endef
-TARGET_DEVICES += wbd222
$(eval $(call BuildImage))